PP Pressure Pipe

Technical specification Material: PP Colour: beige Temperature range: +5... more

Technical specification

Material: PP

Colour: beige

Temperature range: +5 to +100 °C

Shore hardness D: 70° (ISO 868)

Density: 0.905 g/cm³ (ISO 1183)

Yield stress: 30 MPa (DIN EN ISO 527)

Elongation at break: 70 % (DIN EN ISO 527)

Tensile modulus: 1,400 MPa (DIN EN ISO 527)

Impact toughness: without break (DIN EN ISO 179)

Notch impact strength: 7 kJ/m² (DIN EN ISO 179)

Ball pressure hardness: 70 MPa (DIN EN ISO 2039-1)

Coefficient of linear thermal expansion: 1.6 × 10^-4 (DIN 53752)

Thermal conductivity: 0.22 W/m * K (DIN 52612)

Burning behaviour: normally inflammable

Dielectric strength: 58 kV/mm (DIN IEC 60243-1)

Surface resistivity: 10¹⁴ Ohm (DIN IEC 60093)

Max. operating pressure: 12.5 bar at +20 °C

Design: plain-end pipes

Special features: physiologically safe conforming to BfR

No additional information available.

Item	Inside Ø mm	Außen-Ø mm	Wandstärke mm	Länge m	Einheit Stück	Price Euro*
350190	16,2	20	1,9	1	1	13.00
350191	20,4	25	2,3	1	1	17.00
350192	26,2	32	2,9	1	1	23.00
350193	32,6	40	3,7	1	1	28.00
350194	40,8	50	4,6	1	1	38.00
350195	51,4	63	5,8	1	1	47.00
350196	61,4	75	6,8	1	1	60.00
350197	73,6	90	8,2	1	1	67.00
350198	90	110	10	1	1	74.00
350199	102,2	125	11,4	1	1	84.00