Tank pumps made of PP and stainless steel for flow rates up to 200 l/min
Tank pumps made of stainless steel and polypropylene (PP) are classed as drum pumps and deliver flow rates of up to 200 l/min. These barrel and container pumps transfer organic and inorganic media of low to medium viscosity. Laboratory technology, plant operations, process technology and chemical engineering rely on PP drum and container pumps to decant acids, alkalis and other thin to medium-viscosity liquids. The lists below give the key data of each tank pump by material.
PP tank pumps
- Pump tube material: polypropylene (PP)
- flow rate: 75 l/min
- head: 7 mWC
- Medium temperature: -15 °C to +50 °C
- Speed control: infinitely variable
- Immersion depths: 500, 700 and 1000 mm
- Connection on the pump tube: G 1" thread and 19 mm hose tail
- viscosity: 300 mPa·s
- Voltage: 230 V, 50 Hz
- Power consumption: 200 W
Seal-less drum pumps with speed-controlled 230 V motor
- Pump tube material: polypropylene (PP) or PVDF (polyvinylidene fluoride)
- Immersion tube: 1000 mm or 1200 mm
- flow rate: 200 l/min
- head: 14 mWC
- Power consumption: 825 W
- Motor type: universal motor with overcurrent circuit breaker
- medium temperature: +100 °C
- viscosity: 1000 mPa·s
Stainless steel drum and tank pump
- Pump tube material: stainless steel 1.4571 (AISI 316Ti)
- flow rate: 68 l/min
- head: 6.4 mWC
- Medium temperature: -15 °C to +90 °C
- viscosity: 300 mPa·s
- Voltage: 230 V, 50 Hz
- Power consumption: 200 W
Chemical resistance of tank pumps by material
PP pumps (polypropylene, Hostalen® PP)
PP resists lubricants, petrol, aliphatic hydrocarbons, alcohols and ketones, as well as organic acids, inorganic (mineral) acids, hydrogen peroxide, alkaline solutions, ammonia solutions and amines.
Pumps made of stainless steel 1.4571
Stainless steel 1.4571 resists acetone, benzene, diesel oil, natural gas, acetic acid, formalin, Frigen® refrigerants, hot air, heating oil, hexane, hydraulic fluids and oils, oleic acids, petroleum ether, kerosene, turbine oils and heat transfer oils up to +250 °C. This value describes the material; the stainless steel tank pump itself handles media up to +90 °C.
Order tank pumps and drum pumps at rct-online.de
Reichelt Chemietechnik (RCT) keeps its entire range of tank pumps in stock. The programme covers electrically driven and manual drum pumps in three materials: stainless steel drum and tank pumps, seal-less drum pumps with a pump tube made of PP or PVDF, and manual drum pumps in stainless steel or PP.
Every tank pump connects directly to our fabric hoses and laboratory tubing, so you can source the pump and the transfer line from a single supplier. Not sure which model suits your medium? Our specialists will help you choose the right tank pump and the matching tube and hose technology – simply give us a call or send us an e-mail.
Tank pumps made of PP and stainless steel for flow rates up to 200 l/min
Tank pumps made of stainless steel and polypropylene (PP) are classed as drum pumps and deliver flow rates of up to 200...
read more »
Close window
Tank pumps made of PP and stainless steel for flow rates up to 200 l/min
Tank pumps made of stainless steel and polypropylene (PP) are classed as drum pumps and deliver flow rates of up to 200 l/min. These barrel and container pumps transfer organic and inorganic media of low to medium viscosity. Laboratory technology, plant operations, process technology and chemical engineering rely on PP drum and container pumps to decant acids, alkalis and other thin to medium-viscosity liquids. The lists below give the key data of each tank pump by material.
PP tank pumps
- Pump tube material: polypropylene (PP)
- flow rate: 75 l/min
- head: 7 mWC
- Medium temperature: -15 °C to +50 °C
- Speed control: infinitely variable
- Immersion depths: 500, 700 and 1000 mm
- Connection on the pump tube: G 1" thread and 19 mm hose tail
- viscosity: 300 mPa·s
- Voltage: 230 V, 50 Hz
- Power consumption: 200 W
Seal-less drum pumps with speed-controlled 230 V motor
- Pump tube material: polypropylene (PP) or PVDF (polyvinylidene fluoride)
- Immersion tube: 1000 mm or 1200 mm
- flow rate: 200 l/min
- head: 14 mWC
- Power consumption: 825 W
- Motor type: universal motor with overcurrent circuit breaker
- medium temperature: +100 °C
- viscosity: 1000 mPa·s
Stainless steel drum and tank pump
- Pump tube material: stainless steel 1.4571 (AISI 316Ti)
- flow rate: 68 l/min
- head: 6.4 mWC
- Medium temperature: -15 °C to +90 °C
- viscosity: 300 mPa·s
- Voltage: 230 V, 50 Hz
- Power consumption: 200 W
Chemical resistance of tank pumps by material
PP pumps (polypropylene, Hostalen® PP)
PP resists lubricants, petrol, aliphatic hydrocarbons, alcohols and ketones, as well as organic acids, inorganic (mineral) acids, hydrogen peroxide, alkaline solutions, ammonia solutions and amines.
Pumps made of stainless steel 1.4571
Stainless steel 1.4571 resists acetone, benzene, diesel oil, natural gas, acetic acid, formalin, Frigen® refrigerants, hot air, heating oil, hexane, hydraulic fluids and oils, oleic acids, petroleum ether, kerosene, turbine oils and heat transfer oils up to +250 °C. This value describes the material; the stainless steel tank pump itself handles media up to +90 °C.
Order tank pumps and drum pumps at rct-online.de
Reichelt Chemietechnik (RCT) keeps its entire range of tank pumps in stock. The programme covers electrically driven and manual drum pumps in three materials: stainless steel drum and tank pumps, seal-less drum pumps with a pump tube made of PP or PVDF, and manual drum pumps in stainless steel or PP.
Every tank pump connects directly to our fabric hoses and laboratory tubing, so you can source the pump and the transfer line from a single supplier. Not sure which model suits your medium? Our specialists will help you choose the right tank pump and the matching tube and hose technology – simply give us a call or send us an e-mail.
