+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Gas burner hoses / Gas hoses DVGW-compliant

3 Products in filtering
No results were found for the filter!
1
Viewed

Certified Gas Burner Hoses: Safety for Gas Burners

Gas burner hoses are offered by RCT in two specifications: either as bulk goods by the meter or as gas burner hoses with end sleeves. The maximum operating pressure for both of these types is 100 mbar, with an operating temperature specified at +70 °C.

Chemical Resistance of the Gas Hoses

  • CR (Chloroprene Rubber / Neoprene®)

provides excellent chemical resistance to acids and alkalis, mineral oils and fats, as well as aliphatic hydrocarbons such as gasoline. It also offers good resistance to aromatics and many common solvents, including halogenated hydrocarbons, esters, and ketones.

Certified CR Gas Hoses: Safe and Reliable

CR hoses are gas-tight, robust, and offer high mechanical strength. They are highly elastic, flame-retardant, weather-resistant, and stable when exposed to ozone — their weather resistance is a key feature. The individual gas burner hoses are available in the following versions:

CR Gas Burner Hoses with End Sleeves are highly flexible and equipped with stainless steel reinforcement. Interruptions in gas supply are ruled out, and kinking is not possible. A key advantage: the end sleeves are simply pushed on and fit securely onto the hose barbs without any additional fixings such as hose clamps. The maximum working pressure is 100 mbar and the maximum temperature load is +70 °C. These products are suitable for all gas burners according to the German industry standard DIN 30665 and for all gases in accordance with the German regulation DVGW worksheet G 260.

CR Gas Burner Hoses sold by the Meter are made of CR (chloroprene rubber) and offered as bulk hose by the meter. The hose is rated for maximum operating pressures up to 100 mbar. It is neither reinforced nor jacketed. This CR gas hose is suitable for all gases according to DVGW worksheet G 260.

Order Gas Burner Hoses from RCT Direct from Stock

The comprehensive range of gas hoses for burners is available directly from stock at Reichelt Chemietechnik and can be ordered easily through our online shop. Whether you need bulk hose by the meter or with end sleeves — our range covers diverse requirements and meets the standards of DVGW worksheet G 260. For detailed information about the materials used, our glossary is a helpful additional resource. In addition, our electronic resistance chart helps you select the ideal material for your specific requirements. Should you have any questions or wish to receive personal advice, our competent team is available by phone or email. Together we will find the ideal solution for your application. Reichelt Chemietechnik — your reliable partner for hose and plastics technology.

Certified Gas Burner Hoses: Safety for Gas Burners Gas burner hoses are offered by RCT in two specifications: either as bulk goods by the meter or as gas burner hoses with end sleeves. The... read more »
Close window

Certified Gas Burner Hoses: Safety for Gas Burners

Gas burner hoses are offered by RCT in two specifications: either as bulk goods by the meter or as gas burner hoses with end sleeves. The maximum operating pressure for both of these types is 100 mbar, with an operating temperature specified at +70 °C.

Chemical Resistance of the Gas Hoses

  • CR (Chloroprene Rubber / Neoprene®)

provides excellent chemical resistance to acids and alkalis, mineral oils and fats, as well as aliphatic hydrocarbons such as gasoline. It also offers good resistance to aromatics and many common solvents, including halogenated hydrocarbons, esters, and ketones.

Certified CR Gas Hoses: Safe and Reliable

CR hoses are gas-tight, robust, and offer high mechanical strength. They are highly elastic, flame-retardant, weather-resistant, and stable when exposed to ozone — their weather resistance is a key feature. The individual gas burner hoses are available in the following versions:

CR Gas Burner Hoses with End Sleeves are highly flexible and equipped with stainless steel reinforcement. Interruptions in gas supply are ruled out, and kinking is not possible. A key advantage: the end sleeves are simply pushed on and fit securely onto the hose barbs without any additional fixings such as hose clamps. The maximum working pressure is 100 mbar and the maximum temperature load is +70 °C. These products are suitable for all gas burners according to the German industry standard DIN 30665 and for all gases in accordance with the German regulation DVGW worksheet G 260.

CR Gas Burner Hoses sold by the Meter are made of CR (chloroprene rubber) and offered as bulk hose by the meter. The hose is rated for maximum operating pressures up to 100 mbar. It is neither reinforced nor jacketed. This CR gas hose is suitable for all gases according to DVGW worksheet G 260.

Order Gas Burner Hoses from RCT Direct from Stock

The comprehensive range of gas hoses for burners is available directly from stock at Reichelt Chemietechnik and can be ordered easily through our online shop. Whether you need bulk hose by the meter or with end sleeves — our range covers diverse requirements and meets the standards of DVGW worksheet G 260. For detailed information about the materials used, our glossary is a helpful additional resource. In addition, our electronic resistance chart helps you select the ideal material for your specific requirements. Should you have any questions or wish to receive personal advice, our competent team is available by phone or email. Together we will find the ideal solution for your application. Reichelt Chemietechnik — your reliable partner for hose and plastics technology.