window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Washer (DIN 125) made of PTFE | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Washer (DIN 125) made of PTFE

Product specification Fastening elements made of PTFE are ideally suitable for... more

Product specification

Fastening elements made of PTFE are ideally suitable for constructions under highest thermal and chemical load. Very good coefficient of sliding friction, therefore no sticking. Elements made of PTFE hardly get dirty due to their excellent antiadhesive properties.

Very good chemical resistance

Very high temperature resistance

Suitable for food contact applications

Extremely resistant to UV and weather, even under extreme climatic conditions

Chemical features:

Universal chemical resistance e.g. to fuming sulfuric and nitric acids, except to molten or dissolved alkali metals, elementary fluorine, perfluorokerosene, chlorinetrifluoride as well as other fluorine compounds that attack the material at high pressures and temperatures.

Material specification:

PTFE is a fluoroplast with excellent resistance to acids, alkalis, solvents and gases.

Good electrical properties.

Sterilizable and usable in a temperature range from -200 to +260 °C depending on the degree of mechanical load.

No embrittlement, even when in contact with boiling helium (-269 °C)

Machinable but bondable only after pretreatment.

Not resistant to fluorine compounds and molten alkali metals at higher temperatures.

Technical specification

Material: PTFE (polytetrafluoroethylene)

Colour: white

Density: 2.15 - 2.20 g/cm3 (DIN 53479)

Temperature range: -200 to +260 °C

Tensile modulus: 410 N/mm2 (DIN 53457)

Tensile strength: 22 - 30 N/mm2 (ASTM D)

Ball pressure hardness (10-sec. value): 27 - 35 N/mm2 (DIN 53453)

Elongation at break: 250 - 400 % (ASTM D)

Bending strength: 5 - 6 (ASTM D 790)

Notch impact strength: 16 kJ/m2 (DIN 53453)

Shore hardness D: 79°

Water absorption: 0.00 % (ASTM D 570)

Volume resistivity: >1018 Ohm x cm (DIN 53482)

Surface resistance: 1017 Ohm (DIN 53482)

Dielectric strength: 48 kV/mm (DIN 53481)

Flammability rating: UL 94 V-0

Regulations: DIN 125, DIN 34815, ISO 7089

No additional information available.
Item Image For thread d
mm
D
mm
h
mm
Einheit
Stück
Price
Euro*
Buy
306722
M3 3,2 7 0,5 25 22.00
306723
M3 3,2 7 0,5 50 33.00
306724
M4 4,3 9 0,8 25 30.00
306725
M4 4,3 9 0,8 50 50.00
306726
M5 5,3 10 1 25 36.00
306727
M5 5,3 10 1 50 61.00
306728
M6 6,4 12 1,6 25 30.00
306729
M6 6,4 12 1,6 50 52.00
306730
M8 8,4 16 1,6 25 39.00
306731
M8 8,4 16 1,6 50 65.00
306732
M10 10,5 20 2 25 52.00
306733
M10 10,5 20 2 50 88.00
306734
M12 13 24 2,5 25 63.00
306735
M12 13 24 2,5 50 112.00
306736
M16 17 30 3 25 67.00
306737
M16 17 30 3 50 118.00
Similar products
Viewed