gtag('event', 'view_item', { "items": [{ "item_id": "G309982", "item_name": "Hexagon Head Screw (DIN 933) made of PP", "item_brand": "Reichelt", "item_category": "Fasteners", "item_category2": "Screws", "item_category3": "Hexagon Head Screw", "price": 1 }]});
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Hexagon Head Screw (DIN 933) made of PP

Technical specification Material: PP (polypropylene) Colour: natural... more

Technical specification

Material: PP (polypropylene)

Colour: natural

Regulations: DIN 933, DIN EN ISO 24017

General Information Resistant to corrosion, abrasion and to most chemicals Extremely good... more

General Information

Resistant to corrosion, abrasion and to most chemicals

Extremely good impact toughness and notch impact strength

High surface hardness

Resistant to hydrolysis

Insulating against moisture and electricity

This material should not be used at freezing temperatures, because of embrittlement at temperatures below 0 °C

Chemical features:

Good resistance to alcohols, ketones, alkalis and acids (except strong and oxidizing acids); resistant to fats and oils, including mineral oils and fuels.

Material specification:

PP is a universally usable standard plastic with excellent properties

PP is sterilizable and has good electrical properties

Weldable; bondable only after pretreatment

PP is similar to PE (polyethylene), but more fat- and oil-resistant, and also features a higher hardness and stiffness than HDPE as well as a better resilience; its impact strength is, however, lower

UV radiation and weather: limited resistance

Material: PP (polypropylene)

Colour: natural

Density: 0.90 g/cm3 (DIN 53479)

Temperature range: 0 to +100 °C

Elastic modulus: 1,350 N/mm2 (ISO 527)

Yield stress: 30 N/mm2 (ISO 527-1)

Tearing strength: 25 - 40 N/mm2 (DIN 53455)

Elongation at break: 70 % (DIN 53455)

Impact resistance: without break (DIN 53453)

Notch impact strength: 7 kJ/m2 (DIN 53453)

Ball pressure hardness: 70 N/mm2 (DIN 53456)

Coefficient of sliding friction against steel (dry): approx. 0.30 - 0.40

Thermal conductivity: 0.22 W/m * K (DIN 52612)

Shore hardness D: 70° (DIN 53505)

Volume resistivity: 1017 Ohm x cm (DIN 53482)

Surface resistance: 1013 Ohm (DIN 53482)

Dielectric constant: 2.27 at 50 Hz (DIN 53483)

Item Image External thread Gewindelänge
mm
h
mm
SW
mm
Einheit
Stück
Price
Euro*
Buy
309982
M3 x 0,5 10 2 5,5 25 39.00
309983
M3 x 0,5 10 2 5,5 50 65.00
309986
M3 x 0,5 16 2 5,5 25 39.00
309987
M3 x 0,5 16 2 5,5 50 65.00
309990
M3 x 0,5 20 2 5,5 25 39.00
309991
M3 x 0,5 20 2 5,5 50 65.00
310004
M4 x 0,7 10 2,8 7 25 52.00
310005
M4 x 0,7 10 2,8 7 50 82.00
310010
M4 x 0,7 16 2,8 7 25 52.00
310011
M4 x 0,7 16 2,8 7 50 82.00
310014
M4 x 0,7 20 2,8 7 25 52.00
310015
M4 x 0,7 20 2,8 7 50 82.00
310034
M5 x 0,8 12 3,5 8 25 52.00
310035
M5 x 0,8 12 3,5 8 50 82.00
310038
M5 x 0,8 16 3,5 8 25 52.00
310039
M5 x 0,8 16 3,5 8 50 82.00
310040
M5 x 0,8 20 3,5 8 25 56.00
310041
M5 x 0,8 20 3,5 8 50 95.00
310042
M5 x 0,8 25 3,5 8 25 56.00
310043
M5 x 0,8 25 3,5 8 50 95.00
310044
M5 x 0,8 30 3,5 8 25 56.00
310045
M5 x 0,8 30 3,5 8 50 95.00
310070
M6 x 1 16 4 10 25 52.00
310071
M6 x 1 16 4 10 50 82.00
310072
M6 x 1 20 4 10 25 56.00
310073
M6 x 1 20 4 10 50 95.00
310074
M6 x 1 25 4 10 25 56.00
310075
M6 x 1 25 4 10 50 95.00
310080
M6 x 1 40 4 10 25 71.00
310081
M6 x 1 40 4 10 50 120.00
310108
M8 x 1,25 20 5,3 13 10 52.00
310109
M8 x 1,25 20 5,3 13 25 103.00
310112
M8 x 1,25 30 5,3 13 10 63.00
310113
M8 x 1,25 30 5,3 13 25 131.00
310116
M8 x 1,25 40 5,3 13 10 63.00
310117
M8 x 1,25 40 5,3 13 25 131.00
310124
M8 x 1,25 60 5,3 13 10 63.00
310125
M8 x 1,25 60 5,3 13 25 131.00
310144
M10 x 1,5 20 6,4 17 5 78.00
310145
M10 x 1,5 20 6,4 17 15 197.00
310146
M10 x 1,5 40 6,4 17 5 78.00
310147
M10 x 1,5 40 6,4 17 15 197.00
310152
M10 x 1,5 60 6,4 17 5 78.00
310153
M10 x 1,5 60 6,4 17 15 197.00
Similar products
Viewed