gtag('event', 'view_item', { "items": [{ "item_id": "G45190", "item_name": "FPM Chemical Tubing - High-Flexible 60", "item_brand": "Reichelt", "item_category": "Tubes & Hoses", "item_category2": "Tubing made of Elastomers (Soft Rubber)", "item_category3": "FPM Tubing", "price": 1 }]});
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

FPM Chemical Tubing - High-Flexible 60

FPM Chemical Tubing - High-Flexible 60
Technical specification Material: FPM (fluorinated rubber TYGON ® -F-5500-A)... more

Technical specification

Material: FPM (fluorinated rubber TYGON®-F-5500-A)

Shore hardness A: 60° ±5°

Density: 1.90 g/cm3

Embrittlement temperature: -51 °C

Tensile strength: 9.3 MPa (ASTM D412-98)

Tear resistance: 17.5 kN/m (ASTM D1004)

Ultimate elongation: 300 % (ASTM D412)

Tensile modulus: 2.4 MPa at 200 % Elongation

Compression set: 37 % at +70 °C / 22 h

Dielectric strength: 19.7 kV/mm (ASTM D149-97)

Water absorption: 0.23 % at +23 °C / 24 h

Tolerance: DIN ISO 3302-1 E2

General Information FPM For use in analytical technology, medical engineering, chemical... more

General Information FPM

For use in analytical technology, medical engineering, chemical industry, biotechnology, laboratory technology and process engineering.

Extraordinary chemical resistance to hydrocarbons, mineral, vegetable, and animal oils, aromatic and chlorine containing solvents, many acids, alkalis, and oxidizing agents. Unstable to polar solvents and certain lyes.

Conveying tubing made of high-quality mixed polymers of fluorinated hydrocarbons

Very good chemical resistance

Very good heat resistance

Very good resistance to effects of ozone, oxygen, aging, and weather

Flame-resistant

Smooth surface

Low abrasion

Highest mechanical strength

Maximum dimensional stability

Material: FPM (fluorinated rubber)

Colour: black

Temperature range: -20 to +200 °C, for a short period +250 °C

Permeability: extremely low, nearly gas-tight

Dielectric constant: 15 at 50 Hz

Volume Resistivity: 2 x 1013 Ohm x cm

Abrasion: 190 mm3

Tolerances: DIN ISO 3302-1 E2

Item Image Inside Ø
mm
Außen-Ø
mm
Wandstärke
mm
max. Betr.-Druck1
bar
Einheit
m
Price
Euro*
Buy
45190
1,6 3,2 0,8 1,2 1 73.00
45191
1,6 3,2 0,8 1,2 3 163.00
45192
1,6 3,2 0,8 1,2 5 229.00
45193
3,2 6,4 1,6 1,3 1 132.00
45194
3,2 6,4 1,6 1,3 3 287.00
45195
3,2 6,4 1,6 1,3 5 390.00
45196
6,4 9,5 1,6 0,9 1 218.00
45197
6,4 9,5 1,6 0,9 3 480.00
45198
6,4 9,5 1,6 0,9 5 670.00
45199
7,9 11,1 1,6 0,7 1 229.00
45200
7,9 11,1 1,6 0,7 3 495.00
45201
7,9 11,1 1,6 0,7 5 686.00
45202
9,5 12,7 1,6 0,6 1 335.00
45203
9,5 12,7 1,6 0,6 3 674.00
45204
9,5 12,7 1,6 0,6 5 873.00
Accessories
Similar products
Thomaplast V Thomaplast V
Thomafluid V Thomafluid V
Thomafluid VI Thomafluid IV
Thomaplast IV Thomaplast IV
Viewed