High-Tech Media Filter Housing - low flow rate

Product specification Filter housing for small flow rates Technical specification... more

Close menu

Product specification

Filter housing for small flow rates

Technical specification

Material:

Top part: PP (polypropylene), blue

Bottom part: PP (polypropylene), blue or TROGAMID^® (transparent)

Seal: NBR

Max. temperature: +70 °C with PP design; +50 °C with TROGAMID^® design

Max. operating pressure: 10 bar at +30 °C; 5 bar at +50 °C

Connections: on both sides 1/4" G internal thread

Height: 85 mm

Weight: 50 g

General Information Use in laboratory and analytical technology, microelectronics,... more

Close menu

General Information

Use in laboratory and analytical technology, microelectronics, refrigerating technology plants, fuel conveyer systems, chemical process engineering, pneumatic and hydraulic systems, doctor's and dentist's offices, photographic laboratories.

For filtration, clarification and particle retention in chemical process solutions, etching baths, mineral oils, refrigerating media, lacquers and dyes, pneumatic pressure gases and air, hydraulic fluids, industrial water, photochemical solutions.

Chemical-resistant, mechanically stable, pressure- and temperature-loadable filter systems for fixed mounting in conveying lines for liquid and gaseous media, consisting of a two-part media-tightly screwable full-plastic filter housing made of polyamide or polyamide/TROGAMID^® combination. Available in two field-proven sizes for delivery capacities up to 1,500 l/h, optionally with handy drain screw on the housing bottom. Fine-filter candles made of UHMW-PE (Ultra High Molecular Weight Polyethylene) or straining filter candles made of PA 6.6 (polyamide 6.6, nylon) with graduated pore sizes between 5 and 350 µm are to be selected according to the intended application.