HDPE Chemical Tubing - calibrated | Reichelt Chemietechnik

Application area Protective tubing, compressed air control tubing, low pressure lines, excess... more

Application area

Protective tubing, compressed air control tubing, low pressure lines, excess pressure tubing, riser tube for aerosol valves, water technology, pneumatic conduits at laser equipment, supply lines

Product specification

Considerably lower tendency to stress cracking compared to LDPE

Suitable for contact with food according to FDA

Excellent mechanical properties, calibrated

Extremely good impact strength

Lowest static friction (good coefficient of sliding friction)

Lowest water absorption

Very good dielectric properties

High chemical resistance

High purity

Physiologically safe

High density

Highest stiffness

High working pressure

Technical specification

Material: HDPE (high density polyethylene)

Colour: natural

Shore hardness D: 65° (ASTM D 2240)

Temperature range: -30 to +80 °C, for a short time +100 °C

Density: 0.96 g/cm³ (ISO 1183-D)

Bending strength: 25 MPa (ASTM D 790)

Tensile strength: 19 MPa (ASTM D 638)

Elongation at break: >500 % (ASTM D 638)

Softening temperature: +124 °C (ASTM D 1525)

Tolerances inside Ø and outside Ø: ±0.10 mm

Regelwerk: FDA 21 CFR §177.1520

Close menu

No additional information available.

Item	Inside Ø mm	Außen-Ø mm	max. Betr.-Druck¹ bar	min. Biegeradius mm	Einheit m	Price Euro*
330095	2	4	33	30	5	120.00
330096	2	4	33	30	15	300.00
330097	4	6	20	40	5	122.00
330098	4	6	20	40	15	307.00
330099	6	8	14	50	5	125.00
330100	6	8	14	50	15	311.00
330101	8	10	11	75	5	131.00
330102	8	10	11	75	15	321.00
330103	10	12	9	100	5	140.00
330104	10	12	9	100	15	347.00