Elbow Pipe Connector with Male Thread made of PP, PVDF or PTFE

Elbow Pipe Connector with Male Thread made of PP, PVDF or PTFE

Product specification L-shape, pipe connection on one side; male G-, NPT- or M-thread on the... more

Close menu

Product specification

L-shape, pipe connection on one side; male G-, NPT- or M-thread on the other side

General Information EMP-4 THOMAFLUID ® -pipe screw fittings are used for connecting pipes... more

Close menu

General Information EMP-4

THOMAFLUID^®-pipe screw fittings are used for connecting pipes made of various materials such as metal, glass or plastic e.g. PA, PTFE or PVDF. This represents a considerable advantage of this kind of screwed fittings. The screw fitting is not limited to use with rigid pipes but also with flexible pipes or tubing. In this case, carrying brackets (items 22036-54) are required.

THOMAFLUID^®-pipe screw fittings of the MULTIFIT^®-EMP-series can be screwed into THOMAFLUID^®-valves, cocks, and flowmeters of the MULTIFIT^®-EMP-series.

Assembly:

The connection principle entails pushing the pipe against the inner edge of the connector and sealing with a sealing ring. The pipe is secured in place by a cutting ring (PEEK), which is forced against the pipe by a nut. The more the nut is screwed onto the connector body, the more the slotted cutting ring wedges the pipe. The result is a tight, friction-locked connection, which can be released at any time. The design concept eliminates the dead volume. It also has no effect on the flow because the inside diameter is identical to that of the pipe.

If flexible tubing has have to be adapted using THOMAFLUID^®-pipe screw fittings, first the carrying brackets have to be put in the flexible tubes. Afterwards, the fixed assembly is done by tightening the cap nut.

PP (Polypropylene)

Extremely good impact toughness and notch impact strength

Higher hardness and stiffness as well as better resilience than PE

Thermoforming possible

Very good dielectrical properties

Good resistance to alcohols, ketones, conc. acids and alkalis

Not stable to aromatic hydrocarbons, fats and oils, halogenes

Autoclavable

Resistant to hydrolysis

Physiologically safe

Regulatory compliance to FDA 21 CFR 177.1520, RoHS, BPA-free, DEHP-free, BSE/ADI-free

Colour: grey

Density: 0.90 g/cm³

Temperature range: +5 to +90 °C

Shore hardness D: 72°

Max. operating pressure: 10 bar at +20 °C

Water absorption: <0.05 %

Tensile strength: 25 - 40 N/mm²

Elongation at break: 800 %

Surface resistance: >10¹³ Ohm

Melt flow index MFR: 0.3 g/10 min.

PVDF (Polyvinylidene fluoride)

High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.

High impact toughness even at low temperatures

Good breakdown strength

Low dielectric loss factor

Highest mechanical stability and stiffness

Meeting highest purity requirements

Comply with the guidelines from FDA, BSE/ADI-free and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.

Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualities

Outstanding resistance to UV, weather and aging

Flame-resistant

High thermal stability

Resistant to alcohols, fats and oils, halogenes, alkalis, acids

Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid

Colour: nature, slightly translucent

Density: 1.75 g/cm³

Temperature range: -40 to +140 °C

Shore hardness D: 79°

Max. operating pressure: 10 bar at +20 °C

Water absorption: <0.04 %

Tensile strength: 38 - 50 N/mm²

Surface resistance: >10¹³ Ohm

Melt flow index MFR: 6 g/10 min.

PTFE (Polytetrafluoroethylene)

Heavy-duty plastic

Antiadhesive surface

Outstanding sliding properties

Lowest friction coefficient of all fluorinated plastics

Excellent stress cracking resistance

Excellent weather resistance

Highest gas-tightness

No water absorption

Very good dielectric properties independent of frequency and temperature

Very good electrical insulating capacity also at air humidity

High tracking resistance

Non-combustible

Colour: milky, white

Density: 2.20 g/cm³

Temperature range: -200 to +150 °C

Shore hardness D: 60°

Max. operating pressure: 6 bar at +20 °C

Tearing strength: 30 - 40 N/mm²

Elongation at break: 300 %

Water absorption: 0.01 %

Surface resistance: >10¹⁷ Ohm

Item	Pipe outside Ø mm	Außengewinde	D mm	l1 mm	L1 mm	L2 mm	Werkstoff	Einheit Stück	Price Euro*
10675	4	G 1/8"	15	8	36	15	PP	10	118.00
10677	4	G 1/8"	15	8	36	15	PVDF	2	129.00
10678	4	G 1/4"	15	12	36	15	PP	10	129.00
10680	4	G 1/4"	15	12	36	15	PVDF	2	135.00
10681	4	G 3/8"	20	12	39	15	PP	10	182.00
10683	4	G 3/8"	20	12	39	15	PVDF	2	142.00
10684	4	G 1/2"	25	14	42	15	PP	5	129.00
10686	4	G 1/2"	25	14	42	15	PVDF	2	161.00
22623	6	G 1/8"	15	8	36	15	PP	10	118.00
22625	6	G 1/8"	15	8	36	15	PVDF	2	128.00
22627	6	G 1/4"	15	12	36	15	PP	10	126.00
22628	6	G 1/4"	15	12	36	15	PTFE	2	149.00
22629	6	G 1/4"	15	12	36	15	PVDF	2	135.00
22631	6	G 3/8"	20	12	39	15	PP	10	182.00
22633	6	G 3/8"	20	12	39	15	PVDF	2	141.00
22635	6	G 1/2"	25	14	42	15	PP	5	129.00
22637	6	G 1/2"	25	14	42	15	PVDF	2	161.00
22639	8	G 1/8"	15	8	36	16	PP	10	181.00
22641	8	G 1/8"	15	8	36	16	PVDF	2	161.00
22643	8	G 1/4"	15	12	36	16	PP	10	189.00
22644	8	G 1/4"	15	12	36	16	PTFE	2	177.00
22645	8	G 1/4"	15	12	36	16	PVDF	2	161.00
22647	8	G 3/8"	20	12	39	16	PP	5	119.00
22648	8	G 3/8"	20	12	39	16	PTFE	2	174.00
22649	8	G 3/8"	20	12	39	16	PVDF	2	161.00
22651	8	G 1/2"	25	14	42	16	PP	5	140.00
22653	8	G 1/2"	25	14	42	16	PVDF	2	165.00
22655	10	G 1/8"	20	8	41	18	PP	5	140.00
22657	10	G 1/8"	20	8	41	18	PVDF	2	165.00
22659	10	G 1/4"	20	12	41	18	PP	5	139.00
22661	10	G 1/4"	20	12	41	18	PVDF	2	165.00
22663	10	G 3/8"	20	12	41	18	PP	5	145.00
22665	10	G 3/8"	20	12	41	18	PVDF	2	165.00
22667	10	G 1/2"	25	14	44	18	PP	5	172.00
22669	10	G 1/2"	25	14	44	18	PVDF	2	167.00
22671	12	G 1/8"	20	8	43	20	PP	5	172.00
22673	12	G 1/8"	20	8	43	20	PVDF	2	167.00
22675	12	G 1/4"	20	12	43	20	PP	5	172.00
22677	12	G 1/4"	20	12	43	20	PVDF	2	167.00
22679	12	G 3/8"	20	12	43	20	PP	5	172.00
22681	12	G 3/8"	20	12	43	20	PVDF	2	167.00
22683	12	G 1/2"	25	14	46	20	PP	5	188.00
22684	12	G 1/2"	25	14	46	20	PTFE	1	103.00
22685	12	G 1/2"	25	14	46	20	PVDF	1	93.00
22687	14	G 1/8"	25	8	47	22	PP	5	204.00
22689	14	G 1/8"	25	8	47	22	PVDF	1	93.00
22691	14	G 1/4"	25	12	47	22	PP	5	209.00
22693	14	G 1/4"	25	12	47	22	PVDF	1	93.00
22695	14	G 3/8"	25	12	47	22	PP	5	220.00
22697	14	G 3/8"	25	12	47	22	PVDF	1	99.00
22699	14	G 1/2"	25	14	47	22	PP	3	142.00
10663	4	NPT 1/8"	15	10	36	15	PP	10	117.00
10665	4	NPT 1/8"	15	10	36	15	PVDF	2	128.00
10666	4	NPT 1/4"	15	15	36	15	PP	10	126.00
10668	4	NPT 1/4"	15	15	36	15	PVDF	2	135.00
10669	4	NPT 3/8"	20	15	39	15	PP	10	182.00
10670	4	NPT 3/8"	20	15	39	15	PTFE	2	155.00
10671	4	NPT 3/8"	20	15	39	15	PVDF	2	142.00
10672	4	NPT 1/2"	25	20	42	15	PP	5	129.00
10674	4	NPT 1/2"	25	20	42	15	PVDF	2	161.00
22703	6	NPT 1/8"	15	10	36	15	PP	10	117.00
22705	6	NPT 1/8"	15	10	36	15	PVDF	2	128.00
22707	6	NPT 1/4"	15	15	36	15	PP	10	126.00
22709	6	NPT 1/4"	15	15	36	15	PVDF	2	135.00
22711	6	NPT 3/8"	20	15	39	15	PP	10	181.00
22713	6	NPT 3/8"	20	15	39	15	PVDF	2	142.00
22715	6	NPT 1/2"	25	20	42	15	PP	5	129.00
22717	6	NPT 1/2"	25	20	42	15	PVDF	2	161.00
22719	8	NPT 1/8"	15	10	36	16	PP	10	182.00
22721	8	NPT 1/8"	15	10	36	16	PVDF	2	161.00
22723	8	NPT 1/4"	15	15	36	16	PP	10	193.00
22725	8	NPT 1/4"	15	15	36	16	PVDF	2	161.00
22727	8	NPT 3/8"	20	15	39	16	PP	5	119.00
22729	8	NPT 3/8"	20	15	39	16	PVDF	2	161.00
22731	8	NPT 1/2"	25	20	42	16	PP	5	140.00
22733	8	NPT 1/2"	25	20	42	16	PVDF	2	165.00
22735	10	NPT 1/8"	20	10	41	18	PP	5	140.00
22737	10	NPT 1/8"	20	10	41	18	PVDF	2	165.00
23473	10	NPT 1/4"	20	15	41	18	PP	5	139.00
23475	10	NPT 1/4"	20	15	41	18	PVDF	2	165.00
23477	10	NPT 3/8"	20	15	41	18	PP	5	143.00
23479	10	NPT 3/8"	20	15	41	18	PVDF	2	165.00
23481	10	NPT 1/2"	25	20	44	18	PP	5	172.00
23483	10	NPT 1/2"	25	20	44	18	PVDF	2	167.00
23485	12	NPT 1/8"	20	10	43	20	PP	5	172.00
23487	12	NPT 1/8"	20	10	43	20	PVDF	2	167.00
23489	12	NPT 1/4"	20	15	43	20	PP	5	172.00
23491	12	NPT 1/4"	20	15	43	20	PVDF	2	167.00
23493	12	NPT 3/8"	20	15	43	20	PP	5	172.00
23495	12	NPT 3/8"	20	15	43	20	PVDF	2	167.00
23497	12	NPT 1/2"	25	20	46	20	PP	5	188.00
23499	12	NPT 1/2"	25	20	46	20	PVDF	1	93.00
23501	14	NPT 1/8"	25	10	47	22	PP	5	204.00
23503	14	NPT 1/8"	25	10	47	22	PVDF	1	93.00
23505	14	NPT 1/4"	25	15	47	22	PP	5	209.00
23507	14	NPT 1/4"	25	15	47	22	PVDF	1	93.00
23509	14	NPT 3/8"	25	15	47	22	PP	5	220.00
23511	14	NPT 3/8"	25	15	47	22	PVDF	1	99.00
23513	14	NPT 1/2"	25	20	47	22	PP	3	142.00
23515	14	NPT 1/2"	25	20	47	22	PVDF	1	105.00
22739	6	M10 x 1,5	15	8	36	15	PP	10	a.A.
22741	6	M10 x 1,5	15	8	36	15	PVDF	5	99.00
22743	6	M12 x 1,5	15	12	36	15	PP	10	a.A.
22745	6	M12 x 1,5	15	12	36	15	PVDF	2	a.A.
22747	6	M16 x 1,5	20	12	39	15	PP	10	a.A.
22749	6	M16 x 1,5	20	12	39	15	PVDF	2	a.A.
22751	6	M18 x 1,5	20	12	39	15	PP	5	a.A.
22753	6	M18 x 1,5	20	12	39	15	PVDF	2	a.A.
22755	8	M10 x 1,5	15	8	36	16	PP	10	a.A.
22757	8	M10 x 1,5	15	8	36	16	PVDF	2	a.A.
22759	8	M12 x 1,5	15	12	36	16	PP	10	a.A.
22761	8	M12 x 1,5	15	12	36	16	PVDF	2	a.A.
22763	8	M16 x 1,5	20	12	39	16	PP	10	a.A.
22765	8	M16 x 1,5	20	12	39	16	PVDF	2	a.A.
22767	8	M18 x 1,5	20	12	39	16	PP	5	a.A.
22769	8	M18 x 1,5	20	12	39	16	PVDF	2	a.A.
22771	10	M10 x 1,5	20	8	41	18	PP	10	a.A.
22773	10	M10 x 1,5	20	8	41	18	PVDF	2	a.A.
22775	10	M12 x 1,5	20	12	41	18	PP	10	a.A.
22777	10	M12 x 1,5	20	12	41	18	PVDF	2	a.A.
22779	10	M16 x 1,5	20	12	41	18	PP	5	a.A.
22781	10	M16 x 1,5	20	12	41	18	PVDF	2	a.A.
22783	10	M18 x 1,5	20	12	41	18	PP	5	a.A.
22785	10	M18 x 1,5	20	12	41	18	PVDF	2	a.A.
22787	12	M12 x 1,5	20	12	43	20	PP	5	a.A.
22788	12	M12 x 1,5	20	12	43	20	PTFE	2	94.00
22789	12	M12 x 1,5	20	12	43	20	PVDF	2	a.A.
22791	12	M14 x 1,5	20	12	43	20	PP	5	a.A.
22793	12	M14 x 1,5	20	12	43	20	PVDF	2	a.A.
22795	12	M16 x 1,5	20	12	43	20	PP	5	a.A.
22797	12	M16 x 1,5	20	12	43	20	PVDF	2	a.A.
22799	12	M18 x 1,5	20	12	43	20	PP	5	a.A.
22801	12	M18 x 1,5	20	12	43	20	PVDF	2	a.A.
22803	14	M12 x 1,5	25	12	47	22	PP	5	a.A.
22805	14	M12 x 1,5	25	12	47	22	PVDF	2	a.A.
22807	14	M14 x 1,5	25	12	47	22	PP	5	a.A.
22809	14	M14 x 1,5	25	12	47	22	PVDF	2	a.A.
22811	14	M16 x 1,5	25	12	47	22	PP	5	a.A.
22813	14	M16 x 1,5	25	12	47	22	PVDF	2	a.A.
22815	14	M18 x 1,5	25	12	47	22	PP	5	a.A.
22817	14	M18 x 1,5	25	12	47	22	PVDF	1	a.A.