Elbow Pipe Connector with Female Thread made of PP, PVDF or PTFE

Elbow Pipe Connector with Female Thread made of PP, PVDF or PTFE

Product specification L-shape, pipe connection on one side; female G- or M-thread on the... more

Close menu

Product specification

L-shape, pipe connection on one side; female G- or M-thread on the other side

General Information EMP-4 THOMAFLUID ® -pipe screw fittings are used for connecting pipes... more

Close menu

General Information EMP-4

THOMAFLUID^®-pipe screw fittings are used for connecting pipes made of various materials such as metal, glass or plastic e.g. PA, PTFE or PVDF. This represents a considerable advantage of this kind of screwed fittings. The screw fitting is not limited to use with rigid pipes but also with flexible pipes or tubing. In this case, carrying brackets (items 22036-54) are required.

THOMAFLUID^®-pipe screw fittings of the MULTIFIT^®-EMP-series can be screwed into THOMAFLUID^®-valves, cocks, and flowmeters of the MULTIFIT^®-EMP-series.

Assembly:

The connection principle entails pushing the pipe against the inner edge of the connector and sealing with a sealing ring. The pipe is secured in place by a cutting ring (PEEK), which is forced against the pipe by a nut. The more the nut is screwed onto the connector body, the more the slotted cutting ring wedges the pipe. The result is a tight, friction-locked connection, which can be released at any time. The design concept eliminates the dead volume. It also has no effect on the flow because the inside diameter is identical to that of the pipe.

If flexible tubing has have to be adapted using THOMAFLUID^®-pipe screw fittings, first the carrying brackets have to be put in the flexible tubes. Afterwards, the fixed assembly is done by tightening the cap nut.

PP (Polypropylene)

Extremely good impact toughness and notch impact strength

Higher hardness and stiffness as well as better resilience than PE

Thermoforming possible

Very good dielectrical properties

Good resistance to alcohols, ketones, conc. acids and alkalis

Not stable to aromatic hydrocarbons, fats and oils, halogenes

Autoclavable

Resistant to hydrolysis

Physiologically safe

Regulatory compliance to FDA 21 CFR 177.1520, RoHS, BPA-free, DEHP-free, BSE/ADI-free

Colour: grey

Density: 0.90 g/cm³

Temperature range: +5 to +90 °C

Shore hardness D: 72°

Max. operating pressure: 10 bar at +20 °C

Water absorption: <0.05 %

Tensile strength: 25 - 40 N/mm²

Elongation at break: 800 %

Surface resistance: >10¹³ Ohm

Melt flow index MFR: 0.3 g/10 min.

PVDF (Polyvinylidene fluoride)

High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.

High impact toughness even at low temperatures

Good breakdown strength

Low dielectric loss factor

Highest mechanical stability and stiffness

Meeting highest purity requirements

Comply with the guidelines from FDA, BSE/ADI-free and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.

Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualities

Outstanding resistance to UV, weather and aging

Flame-resistant

High thermal stability

Resistant to alcohols, fats and oils, halogenes, alkalis, acids

Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid

Colour: nature, slightly translucent

Density: 1.75 g/cm³

Temperature range: -40 to +140 °C

Shore hardness D: 79°

Max. operating pressure: 10 bar at +20 °C

Water absorption: <0.04 %

Tensile strength: 38 - 50 N/mm²

Surface resistance: >10¹³ Ohm

Melt flow index MFR: 6 g/10 min.

PTFE (Polytetrafluoroethylene)

Heavy-duty plastic

Antiadhesive surface

Outstanding sliding properties

Lowest friction coefficient of all fluorinated plastics

Excellent stress cracking resistance

Excellent weather resistance

Highest gas-tightness

No water absorption

Very good dielectric properties independent of frequency and temperature

Very good electrical insulating capacity also at air humidity

High tracking resistance

Non-combustible

Colour: milky, white

Density: 2.20 g/cm³

Temperature range: -200 to +150 °C

Shore hardness D: 60°

Max. operating pressure: 6 bar at +20 °C

Tearing strength: 30 - 40 N/mm²

Elongation at break: 300 %

Water absorption: 0.01 %

Surface resistance: >10¹⁷ Ohm

Item	Pipe outside Ø mm	Innengewinde	D mm	l1 mm	L1 mm	L2 mm	Werkstoff	Einheit Stück	Price Euro*
10722	4	G 1/8"	15	12	36	17	PP	10	193.00
10724	4	G 1/8"	15	12	36	17	PVDF	5	150.00
10725	4	G 1/4"	20	15	39	20	PP	10	193.00
10727	4	G 1/4"	20	15	39	20	PVDF	5	150.00
10728	4	G 3/8"	25	15	42	20	PP	5	118.00
10730	4	G 3/8"	25	15	42	20	PVDF	3	135.00
10731	4	G 1/2"	30	16	44	20	PP	5	124.00
10733	4	G 1/2"	30	16	44	20	PVDF	2	103.00
22819	6	G 1/8"	15	12	36	17	PP	10	193.00
22821	6	G 1/8"	15	12	36	17	PVDF	5	150.00
22823	6	G 1/4"	20	15	39	20	PP	10	193.00
22825	6	G 1/4"	20	15	39	20	PVDF	5	150.00
22827	6	G 3/8"	25	15	42	20	PP	5	118.00
22829	6	G 3/8"	25	15	42	20	PVDF	3	135.00
22831	6	G 1/2"	30	16	44	20	PP	5	124.00
22833	6	G 1/2"	30	16	44	20	PVDF	2	103.00
22835	8	G 1/8"	15	12	36	17	PP	5	140.00
22837	8	G 1/8"	15	12	36	17	PVDF	2	103.00
22839	8	G 1/4"	20	15	39	20	PP	5	140.00
22841	8	G 1/4"	20	15	39	20	PVDF	2	103.00
22843	8	G 3/8"	25	15	42	20	PP	5	140.00
22845	8	G 3/8"	25	15	42	20	PVDF	2	112.00
22847	8	G 1/2"	30	16	44	20	PP	5	177.00
22849	8	G 1/2"	30	16	44	20	PVDF	2	125.00
22851	10	G 1/8"	20	12	41	20	PP	5	188.00
22853	10	G 1/8"	20	12	41	20	PVDF	2	125.00
22855	10	G 1/4"	20	15	41	23	PP	5	185.00
22857	10	G 1/4"	20	15	41	23	PVDF	2	125.00
22859	10	G 3/8"	25	15	44	23	PP	5	189.00
22861	10	G 3/8"	25	15	44	23	PVDF	2	125.00
22863	10	G 1/2"	30	16	46	23	PP	3	132.00
22865	10	G 1/2"	30	16	46	23	PVDF	2	131.00
22867	12	G 1/8"	20	12	43	20	PP	3	132.00
22869	12	G 1/8"	20	12	43	20	PVDF	2	131.00
22871	12	G 1/4"	20	15	43	23	PP	3	132.00
22873	12	G 1/4"	20	15	43	23	PVDF	2	131.00
22875	12	G 3/8"	25	15	46	23	PP	3	132.00
22876	12	G 3/8"	25	15	46	23	PTFE	2	143.00
22877	12	G 3/8"	25	15	46	23	PVDF	2	131.00
22879	12	G 1/2"	30	16	48	23	PP	3	142.00
22881	12	G 1/2"	30	16	48	23	PVDF	2	137.00
22883	14	G 1/8"	25	12	47	20	PP	3	135.00
22885	14	G 1/8"	25	12	47	20	PVDF	1	76.00
22887	14	G 1/4"	25	15	47	23	PP	3	135.00
22889	14	G 1/4"	25	15	47	23	PVDF	1	76.00
22891	14	G 3/8"	25	15	47	23	PP	3	135.00
22893	14	G 3/8"	25	15	47	23	PVDF	1	91.00
22895	14	G 1/2"	30	16	49	23	PP	2	105.00
22897	14	G 1/2"	30	16	49	23	PVDF	1	101.00
22899	6	M10 x 1,5	15	12	36	17	PP	10	a.A.
22901	6	M10 x 1,5	15	12	36	17	PVDF	5	a.A.
22903	6	M12 x 1,5	20	15	39	20	PP	10	a.A.
22905	6	M12 x 1,5	20	15	39	20	PVDF	5	a.A.
22907	6	M16 x 1,5	25	15	42	20	PP	5	a.A.
22909	6	M16 x 1,5	25	15	42	20	PVDF	3	a.A.
22911	6	M18 x 1,5	25	15	42	20	PP	5	a.A.
22913	6	M18 x 1,5	25	15	42	20	PVDF	2	a.A.
22915	8	M10 x 1,5	15	12	36	17	PP	10	a.A.
22917	8	M10 x 1,5	15	12	36	17	PVDF	5	a.A.
22919	8	M12 x 1,5	20	15	39	20	PP	10	a.A.
22921	8	M12 x 1,5	20	15	39	20	PVDF	5	a.A.
22923	8	M16 x 1,5	25	15	42	20	PP	5	a.A.
22925	8	M16 x 1,5	25	15	42	20	PVDF	3	a.A.
22927	8	M18 x 1,5	25	15	42	20	PP	5	a.A.
22929	8	M18 x 1,5	25	15	42	20	PVDF	2	a.A.
22931	10	M10 x 1,5	20	12	41	20	PP	5	a.A.
22933	10	M10 x 1,5	20	12	41	20	PVDF	2	a.A.
22935	10	M12 x 1,5	20	15	41	23	PP	5	a.A.
22937	10	M12 x 1,5	20	15	41	23	PVDF	2	a.A.
22939	10	M16 x 1,5	25	15	44	23	PP	5	a.A.
22941	10	M16 x 1,5	25	15	44	23	PVDF	2	a.A.
22943	10	M18 x 1,5	25	15	44	23	PP	5	a.A.
22945	10	M18 x 1,5	25	15	44	23	PVDF	2	a.A.
22947	12	M12 x 1,5	20	15	43	23	PP	5	a.A.
22949	12	M12 x 1,5	20	15	43	23	PVDF	2	a.A.
22951	12	M14 x 1,5	20	15	43	23	PP	5	a.A.
22953	12	M14 x 1,5	20	15	43	23	PVDF	2	a.A.
22955	12	M16 x 1,5	25	15	46	23	PP	5	a.A.
22957	12	M16 x 1,5	25	15	46	23	PVDF	2	a.A.
22959	12	M18 x 1,5	25	15	46	23	PP	3	a.A.
22961	12	M18 x 1,5	25	15	46	23	PVDF	2	a.A.
22963	14	M12 x 1,5	25	15	47	23	PP	3	a.A.
22965	14	M12 x 1,5	25	15	47	23	PVDF	2	a.A.
22967	14	M14 x 1,5	25	15	47	23	PP	3	a.A.
22969	14	M14 x 1,5	25	15	47	23	PVDF	2	a.A.
22971	14	M16 x 1,5	25	15	47	23	PP	3	a.A.
22973	14	M16 x 1,5	25	15	47	23	PVDF	2	a.A.
22975	14	M18 x 1,5	25	15	47	23	PP	3	a.A.
22977	14	M18 x 1,5	25	15	47	23	PVDF	2	a.A.