+++ Aufgrund eines technischen Defekts sind wir zur Zeit weder telefonisch, noch per E-Mail erreichbar. Während wir an einer Lösung arbeiten, können Sie natürlich weiterhin wie gewohnt bestellen. +++

Hexagon Socket Countersunk Head Screw (DIN 7991) made of PA | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Hexagon Socket Countersunk Head Screw (DIN 7991) made of PA

Technical specification Material: PA 6.6 (polyamide 66) Colour: natural... more

Technical specification

Material: PA 6.6 (polyamide 66)

Colour: natural

Regulations: DIN 7991, NFE 27160, ISO 10642

General Information Good coefficient of sliding friction High mechanical stability and... more

General Information

Good coefficient of sliding friction

High mechanical stability and fatigue strength

Excellent resilience

Impact resistant

Resistant to abrasion

Resistant to cold

Chemical features:

Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines.

Material specification:

The polyamides are universal materials for mechanical functional parts

The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Insulating properties and an amazingly high tensile strength

PA can also be used in the food processing industry and in medical fields

Resistant to corrosion and abrasion

Non-toxic and unmagnetic

Vibration-damping

PA 6.6 features the same chemical resistance as PA 6

PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6

However, PA 6.6 is a little less impact resistant compared to PA 6

Material: PA 6.6 (polyamide 6.6)

Colour: natural

Density: 1.14 g/cm3 (DIN 53479)

Temperature range: -30 to +100 °C

Melting temperature: +255 °C (DIN 53736)

Yield stress: 83 N/mm2 (ISO 527)

Elongation at break: 30 % (DIN 53455)

Bending strength: 115 N/mm2 (DIN 53452)

Elastic modulus: 3,000 N/mm2 (DIN 53457)

Impact resistance (Charpy): without break (DIN 53453)

Notch impact strength (Izod): 60 J/m (ASTM D 256)

Coefficient of sliding friction against steel (dry): 0.35 - 0.42

Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483)

Volume resistivity: 1015 Ohm x cm (DIN 53482)

Surface resistance: approx. 1014 Ohm (DIN 53482)

Comparative tracking index (CTI): >600 V (IEC 112)

Dielectric strength: approx. 40 kV/mm (DIN 53481)

Water absorption (saturation): approx. 8.5 % (DIN 53495)

Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

Item Image External thread Thread length
mm
D
mm
h
mm
Unit
piece
Price
Euro*
Buy
3331891
M5 x 0,8 8 10 2,8 50 40.00
3331901
M5 x 0,8 8 10 2,8 100 69.00
3331911
M5 x 0,8 10 10 2,8 50 40.00
3331921
M5 x 0,8 10 10 2,8 100 69.00
3331931
M5 x 0,8 12 10 2,8 50 40.00
3331941
M5 x 0,8 12 10 2,8 100 69.00
333195
M5 x 0,8 17 10 2,8 50 40.00
333196
M5 x 0,8 17 10 2,8 100 69.00
3331971
M5 x 0,8 20 10 2,8 50 40.00
3331981
M5 x 0,8 20 10 2,8 100 69.00
333199
M5 x 0,8 25 10 2,8 50 40.00
333200
M5 x 0,8 25 10 2,8 100 69.00
333201
M5 x 0,8 30 10 2,8 50 53.00
333202
M5 x 0,8 30 10 2,8 100 90.00
333203
M5 x 0,8 35 10 2,8 50 53.00
333204
M5 x 0,8 35 10 2,8 100 90.00
333205
M5 x 0,8 40 10 2,8 50 53.00
333206
M5 x 0,8 40 10 2,8 100 90.00
333207
M5 x 0,8 50 10 2,8 50 53.00
333208
M5 x 0,8 50 10 2,8 100 90.00
3332091
M6 x 1 10 12 3,3 50 31.00
3332101
M6 x 1 10 12 3,3 100 53.00
3332111
M6 x 1 12 12 3,3 50 31.00
3332121
M6 x 1 12 12 3,3 100 53.00
333213
M6 x 1 15 12 3,3 50 31.00
333214
M6 x 1 15 12 3,3 100 53.00
333215
M6 x 1 17 12 3,3 50 31.00
333216
M6 x 1 17 12 3,3 100 53.00
3332171
M6 x 1 20 12 3,3 50 31.00
3332181
M6 x 1 20 12 3,3 100 53.00
333219
M6 x 1 25 12 3,3 50 31.00
333220
M6 x 1 25 12 3,3 100 53.00
333221
M6 x 1 30 12 3,3 50 31.00
333222
M6 x 1 30 12 3,3 100 53.00
333223
M6 x 1 35 12 3,3 50 31.00
333224
M6 x 1 35 12 3,3 100 53.00
333225
M6 x 1 40 12 3,3 50 31.00
333226
M6 x 1 40 12 3,3 100 53.00
333227
M6 x 1 45 12 3,3 50 50.00
333228
M6 x 1 45 12 3,3 100 86.00
333229
M6 x 1 50 12 3,3 50 50.00
333230
M6 x 1 50 12 3,3 100 86.00
333231
M6 x 1 55 12 3,3 50 50.00
333232
M6 x 1 55 12 3,3 100 86.00
333233
M6 x 1 65 12 3,3 50 50.00
333234
M6 x 1 65 12 3,3 100 86.00
333235
M6 x 1 75 12 3,3 50 50.00
333236
M6 x 1 75 12 3,3 100 86.00
333237
M6 x 1 85 12 3,3 50 50.00
333238
M6 x 1 85 12 3,3 100 86.00
3332391
M8 x 1,25 10 16 4,4 50 36.00
3332401
M8 x 1,25 10 16 4,4 100 61.00
3332411
M8 x 1,25 12 16 4,4 50 36.00
3332421
M8 x 1,25 12 16 4,4 100 61.00
333243
M8 x 1,25 15 16 4,4 50 36.00
333244
M8 x 1,25 15 16 4,4 100 61.00
333245
M8 x 1,25 17 16 4,4 50 36.00
333246
M8 x 1,25 17 16 4,4 100 61.00
3332471
M8 x 1,25 20 16 4,4 50 36.00
3332481
M8 x 1,25 20 16 4,4 100 61.00
333249
M8 x 1,25 25 16 4,4 50 47.00
333250
M8 x 1,25 25 16 4,4 100 81.00
333251
M8 x 1,25 30 16 4,4 50 47.00
333252
M8 x 1,25 30 16 4,4 100 81.00
333253
M8 x 1,25 35 16 4,4 50 47.00
333254
M8 x 1,25 35 16 4,4 100 81.00
333255
M8 x 1,25 40 16 4,4 50 47.00
333256
M8 x 1,25 40 16 4,4 100 81.00
333257
M8 x 1,25 45 16 4,4 50 47.00
333258
M8 x 1,25 45 16 4,4 100 81.00
333259
M8 x 1,25 50 16 4,4 50 57.00
333260
M8 x 1,25 50 16 4,4 100 94.00
333261
M8 x 1,25 55 16 4,4 50 57.00
333262
M8 x 1,25 55 16 4,4 100 94.00
333263
M8 x 1,25 65 16 4,4 50 57.00
333264
M8 x 1,25 65 16 4,4 100 94.00
333265
M8 x 1,25 75 16 4,4 50 39.00
333266
M8 x 1,25 75 16 4,4 100 67.00
333267
M8 x 1,25 85 16 4,4 50 39.00
333268
M8 x 1,25 85 16 4,4 100 67.00
3332691
M10 x 1,5 10 20 5,5 50 55.00
3332701
M10 x 1,5 10 20 5,5 100 95.00
3332711
M10 x 1,5 12 20 5,5 50 55.00
3332721
M10 x 1,5 12 20 5,5 100 95.00
333273
M10 x 1,5 15 20 5,5 50 55.00
333274
M10 x 1,5 15 20 5,5 100 95.00
333275
M10 x 1,5 17 20 5,5 50 55.00
333276
M10 x 1,5 17 20 5,5 100 95.00
3332771
M10 x 1,5 20 20 5,5 50 55.00
3332781
M10 x 1,5 20 20 5,5 100 95.00
333279
M10 x 1,5 25 20 5,5 50 55.00
333280
M10 x 1,5 25 20 5,5 100 95.00
333281
M10 x 1,5 30 20 5,5 25 38.00
333282
M10 x 1,5 30 20 5,5 50 64.00
333283
M10 x 1,5 35 20 5,5 25 38.00
333284
M10 x 1,5 35 20 5,5 50 64.00
333285
M10 x 1,5 40 20 5,5 25 38.00
333286
M10 x 1,5 40 20 5,5 50 64.00
333287
M10 x 1,5 45 20 5,5 25 38.00
333288
M10 x 1,5 45 20 5,5 50 64.00
333289
M10 x 1,5 50 20 5,5 25 38.00
333290
M10 x 1,5 50 20 5,5 50 64.00
333291
M10 x 1,5 55 20 5,5 25 52.00
333292
M10 x 1,5 55 20 5,5 50 87.00
333293
M10 x 1,5 65 20 5,5 25 52.00
333294
M10 x 1,5 65 20 5,5 50 87.00
333295
M10 x 1,5 85 20 5,5 25 52.00
333296
M10 x 1,5 85 20 5,5 50 87.00
333297
M12 x 1,75 22 24 6,5 25 43.00
333298
M12 x 1,75 22 24 6,5 50 72.00
3332991
M12 x 1,75 25 24 6,5 25 43.00
3333001
M12 x 1,75 25 24 6,5 50 72.00
3333011
M12 x 1,75 30 24 6,5 25 43.00
3333021
M12 x 1,75 30 24 6,5 50 72.00
3333031
M12 x 1,75 35 24 6,5 25 43.00
3333041
M12 x 1,75 35 24 6,5 50 72.00
3333051
M12 x 1,75 40 24 6,5 25 43.00
3333061
M12 x 1,75 40 24 6,5 50 72.00
3333071
M12 x 1,75 45 24 6,5 25 51.00
3333081
M12 x 1,75 45 24 6,5 50 86.00
3333091
M12 x 1,75 50 24 6,5 25 51.00
3333101
M12 x 1,75 50 24 6,5 50 86.00
3333111
M12 x 1,75 55 24 6,5 25 51.00
3333121
M12 x 1,75 55 24 6,5 50 86.00
3333131
M12 x 1,75 65 24 6,5 25 61.00
3333141
M12 x 1,75 65 24 6,5 50 97.00
3333151
M12 x 1,75 85 24 6,5 25 61.00
3333161
M12 x 1,75 85 24 6,5 50 97.00
Similar products
Viewed