Spacer Standoff made of PA - glass fibre reinforced, internal / external thread

Spacer Standoff made of PA - glass fibre reinforced, internal / external thread

Product specification Hexagon spacer standoffs, internal thread on one side, external thread... more

Close menu

Product specification

Hexagon spacer standoffs, internal thread on one side, external thread on the other side

Technical specification

Material: PA 6, glass fibre reinforced (25 %)

Colour: black

General Information PA 6 .6 Good coefficient of sliding friction High mechanical... more

Close menu

General Information PA 6.6

Good coefficient of sliding friction

High mechanical stability and fatigue strength

Excellent resilience

Impact resistant

Resistant to abrasion

Resistant to cold

Chemical features:

Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alkohols, esters, ketones, ethers and amines.

Material specification:

The polyamides are universal materials for mechanical functional parts

The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Insulating properties and an amazingly high tensile strength

PA can also be used in the food processing industry and in medical fields

Resistant to corrosion and abrasion

Non-toxic and unmagnetic

Vibration-damping

PA 6.6 features the same chemical resistance as PA 6

PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6

However, PA 6.6 is a little less impact resistant compared to PA 6

Material: PA 6.6 (polyamide 6.6)

Colour: natural

Density: 1.14 g/cm³ (DIN 53479)

Temperature range: -30 to +100 °C

Melting temperature: +255 °C (DIN 53736)

Yield stress: 83 N/mm² (ISO 527)

Elongation at break: 30 % (DIN 53455)

Bending strength: 115 N/mm² (DIN 53452)

Elastic modulus: 3,000 N/mm² (DIN 53457)

Impact resistance (Charpy): without break (DIN 53453)

Notch impact strength (Izod): 60 J/m (ASTM D 256)

Coefficient of sliding friction against steel (dry): 0.35 - 0.42

Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483)

Volume resistivity: 10¹⁵ Ohm x cm (DIN 53482)

Surface resistance: approx. 10¹⁴ Ohm (DIN 53482)

Comparative tracking index (CTI): >600 V (IEC 112)

Dielectric strength: approx. 40 kV/mm (DIN 53481)

Water absorption (saturation): approx. 8.5 % (DIN 53495)

Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

Item	Internal thread	P1 mm	Außengewinde	P2 mm	L mm	SW mm	Einheit Stück	Price Euro*
312734	M3 x 0,5	5	M3 x 0,5	8	8	6	25	86.00
312735	M3 x 0,5	5	M3 x 0,5	8	8	6	50	142.00
312736	M3 x 0,5	8	M3 x 0,5	8	10	6	25	86.00
312737	M3 x 0,5	8	M3 x 0,5	8	10	6	50	142.00
312738	M3 x 0,5	9	M3 x 0,5	8	12	6	25	95.00
312739	M3 x 0,5	9	M3 x 0,5	8	12	6	50	157.00
312740	M3 x 0,5	10	M3 x 0,5	8	15	6	25	95.00
312741	M3 x 0,5	10	M3 x 0,5	8	15	6	50	157.00
312742	M3 x 0,5	10	M3 x 0,5	8	18	6	25	95.00
312743	M3 x 0,5	10	M3 x 0,5	8	18	6	50	157.00
312744	M3 x 0,5	10	M3 x 0,5	8	20	6	25	95.00
312745	M3 x 0,5	10	M3 x 0,5	8	20	6	50	157.00
312746	M3 x 0,5	10	M3 x 0,5	8	25	6	10	60.00
312747	M3 x 0,5	10	M3 x 0,5	8	25	6	25	129.00
312748	M3 x 0,5	10	M3 x 0,5	8	30	6	10	65.00
312749	M3 x 0,5	10	M3 x 0,5	8	30	6	25	135.00
312750	M3 x 0,5	10	M3 x 0,5	8	35	6	10	67.00
312751	M3 x 0,5	10	M3 x 0,5	8	35	6	25	142.00
312752	M3 x 0,5	10	M3 x 0,5	8	40	6	10	67.00
312753	M3 x 0,5	10	M3 x 0,5	8	40	6	25	142.00
312754	M3 x 0,5	10	M3 x 0,5	8	45	6	10	69.00
312755	M3 x 0,5	10	M3 x 0,5	8	45	6	25	144.00
312756	M3 x 0,5	10	M3 x 0,5	8	50	6	10	69.00
312757	M3 x 0,5	10	M3 x 0,5	8	50	6	25	144.00
312758	M4 x 0,7	6	M4 x 0,7	8	8	8	25	95.00
312759	M4 x 0,7	6	M4 x 0,7	8	8	8	50	159.00
312760	M4 x 0,7	7	M4 x 0,7	8	10	8	25	95.00
312761	M4 x 0,7	7	M4 x 0,7	8	10	8	50	159.00
312762	M4 x 0,7	9	M4 x 0,7	8	12	8	25	95.00
312763	M4 x 0,7	9	M4 x 0,7	8	12	8	50	159.00
312764	M4 x 0,7	10	M4 x 0,7	8	15	8	25	95.00
312765	M4 x 0,7	10	M4 x 0,7	8	15	8	50	159.00
312766	M4 x 0,7	10	M4 x 0,7	8	18	8	25	95.00
312767	M4 x 0,7	10	M4 x 0,7	8	18	8	50	159.00
312768	M4 x 0,7	10	M4 x 0,7	8	20	8	25	95.00
312769	M4 x 0,7	10	M4 x 0,7	8	20	8	50	159.00
312770	M4 x 0,7	10	M4 x 0,7	8	25	8	25	103.00
312771	M4 x 0,7	10	M4 x 0,7	8	25	8	50	172.00
312772	M4 x 0,7	10	M4 x 0,7	8	30	8	10	45.00
312773	M4 x 0,7	10	M4 x 0,7	8	30	8	25	95.00
312774	M4 x 0,7	10	M4 x 0,7	8	35	8	10	54.00
312775	M4 x 0,7	10	M4 x 0,7	8	35	8	25	112.00
312776	M4 x 0,7	10	M4 x 0,7	8	40	8	10	56.00
312777	M4 x 0,7	10	M4 x 0,7	8	40	8	25	116.00
312778	M4 x 0,7	10	M4 x 0,7	8	45	8	10	60.00
312779	M4 x 0,7	10	M4 x 0,7	8	45	8	25	127.00
312780	M4 x 0,7	10	M4 x 0,7	8	50	8	10	63.00
312781	M4 x 0,7	10	M4 x 0,7	8	50	8	25	131.00