gtag('event', 'view_item', { "items": [{ "item_id": "G309366", "item_name": "Slotted Cheese Head Screw (DIN 84) made of PP", "item_brand": "Reichelt", "item_category": "Fasteners", "item_category2": "Screws", "item_category3": "Slotted Cheese Head Screw", "price": 1 }]});
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Slotted Cheese Head Screw (DIN 84) made of PP

Technical specification Material: PP (polypropylene) Colour: natural... more

Technical specification

Material: PP (polypropylene)

Colour: natural

Regulations: DIN 84, ISO 1207, NFE 27115, NFE 25127

General Information Resistant to corrosion, abrasion and to most chemicals Extremely good... more

General Information

Resistant to corrosion, abrasion and to most chemicals

Extremely good impact toughness and notch impact strength

High surface hardness

Resistant to hydrolysis

Insulating against moisture and electricity

This material should not be used at freezing temperatures, because of embrittlement at temperatures below 0 °C

Chemical features:

Good resistance to alcohols, ketones, alkalis and acids (except strong and oxidizing acids); resistant to fats and oils, including mineral oils and fuels.

Material specification:

PP is a universally usable standard plastic with excellent properties

PP is sterilizable and has good electrical properties

Weldable; bondable only after pretreatment

PP is similar to PE (polyethylene), but more fat- and oil-resistant, and also features a higher hardness and stiffness than HDPE as well as a better resilience; its impact strength is, however, lower

UV radiation and weather: limited resistance

Material: PP (polypropylene)

Colour: natural

Density: 0.90 g/cm3 (DIN 53479)

Temperature range: 0 to +100 °C

Elastic modulus: 1,350 N/mm2 (ISO 527)

Yield stress: 30 N/mm2 (ISO 527-1)

Tearing strength: 25 - 40 N/mm2 (DIN 53455)

Elongation at break: 70 % (DIN 53455)

Impact resistance: without break (DIN 53453)

Notch impact strength: 7 kJ/m2 (DIN 53453)

Ball pressure hardness: 70 N/mm2 (DIN 53456)

Coefficient of sliding friction against steel (dry): approx. 0.30 - 0.40

Thermal conductivity: 0.22 W/m * K (DIN 52612)

Shore hardness D: 70° (DIN 53505)

Volume resistivity: 1017 Ohm x cm (DIN 53482)

Surface resistance: 1013 Ohm (DIN 53482)

Dielectric constant: 2.27 at 50 Hz (DIN 53483)

Item Image External thread Gewindelänge
mm
D
mm
l1
mm
l2
mm
Einheit
Stück
Price
Euro*
Buy
309366
M3 x 0,5 10 5,5 2 0,8 25 39.00
309367
M3 x 0,5 10 5,5 2 0,8 50 65.00
309372
M3 x 0,5 16 5,5 2 0,8 25 39.00
309373
M3 x 0,5 16 5,5 2 0,8 50 65.00
309374
M3 x 0,5 20 5,5 2 0,8 25 39.00
309375
M3 x 0,5 20 5,5 2 0,8 50 65.00
309384
M4 x 0,7 6 7 2,6 1,2 25 52.00
309385
M4 x 0,7 6 7 2,6 1,2 50 82.00
309388
M4 x 0,7 10 7 2,6 1,2 25 52.00
309389
M4 x 0,7 10 7 2,6 1,2 50 82.00
309394
M4 x 0,7 16 7 2,6 1,2 25 52.00
309395
M4 x 0,7 16 7 2,6 1,2 50 82.00
309396
M4 x 0,7 20 7 2,6 1,2 25 52.00
309397
M4 x 0,7 20 7 2,6 1,2 50 82.00
309400
M4 x 0,7 30 7 2,6 1,2 25 52.00
309401
M4 x 0,7 30 7 2,6 1,2 50 82.00
309416
M5 x 0,8 10 8,5 3,3 1,2 25 52.00
309417
M5 x 0,8 10 8,5 3,3 1,2 50 82.00
309422
M5 x 0,8 16 8,5 3,3 1,2 25 52.00
309423
M5 x 0,8 16 8,5 3,3 1,2 50 82.00
309424
M5 x 0,8 20 8,5 3,3 1,2 25 56.00
309425
M5 x 0,8 20 8,5 3,3 1,2 50 95.00
309426
M5 x 0,8 25 8,5 3,3 1,2 25 56.00
309427
M5 x 0,8 25 8,5 3,3 1,2 50 95.00
309428
M5 x 0,8 30 8,5 3,3 1,2 25 56.00
309429
M5 x 0,8 30 8,5 3,3 1,2 50 95.00
309432
M5 x 0,8 40 8,5 3,3 1,2 25 56.00
309433
M5 x 0,8 40 8,5 3,3 1,2 50 95.00
309446
M6 x 1 8 10 3,9 1,6 25 52.00
309447
M6 x 1 8 10 3,9 1,6 50 82.00
309448
M6 x 1 10 10 3,9 1,6 25 52.00
309449
M6 x 1 10 10 3,9 1,6 50 82.00
309450
M6 x 1 12 10 3,9 1,6 25 52.00
309451
M6 x 1 12 10 3,9 1,6 50 82.00
309454
M6 x 1 16 10 3,9 1,6 25 52.00
309455
M6 x 1 16 10 3,9 1,6 50 82.00
309456
M6 x 1 20 10 3,9 1,6 25 56.00
309457
M6 x 1 20 10 3,9 1,6 50 95.00
309458
M6 x 1 25 10 3,9 1,6 25 56.00
309459
M6 x 1 25 10 3,9 1,6 50 95.00
309460
M6 x 1 30 10 3,9 1,6 25 71.00
309461
M6 x 1 30 10 3,9 1,6 50 120.00
309478
M8 x 1,25 10 13 5 2 10 45.00
309479
M8 x 1,25 10 13 5 2 25 93.00
309484
M8 x 1,25 16 13 5 2 10 52.00
309485
M8 x 1,25 16 13 5 2 25 103.00
309486
M8 x 1,25 20 13 5 2 10 52.00
309487
M8 x 1,25 20 13 5 2 25 103.00
309488
M8 x 1,25 30 13 5 2 10 63.00
309489
M8 x 1,25 30 13 5 2 25 131.00
309492
M8 x 1,25 40 13 5 2 10 63.00
309493
M8 x 1,25 40 13 5 2 25 131.00
309514
M10 x 1,5 20 16 6 2,5 5 78.00
309515
M10 x 1,5 20 16 6 2,5 15 197.00
309522
M10 x 1,5 40 16 6 2,5 5 78.00
309523
M10 x 1,5 40 16 6 2,5 15 197.00
Similar products
Viewed