window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Straight Pipe Connector with Female Thread made of PP, PVDF or PTFE | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Straight Pipe Connector with Female Thread made of PP, PVDF or PTFE

Product specification Straight, pipe connection on one side; female G- or M-thread on the... more

Product specification

Straight, pipe connection on one side; female G- or M-thread on the other side

General Information EMP-4 THOMAFLUID ® -pipe screw fittings are used for connecting pipes... more

General Information EMP-4

THOMAFLUID®-pipe screw fittings are used for connecting pipes made of various materials such as metal, glass or plastic e.g. PA, PTFE or PVDF. This represents a considerable advantage of this kind of screwed fittings. The screw fitting is not limited to use with rigid pipes but also with flexible pipes or tubing. In this case, carrying brackets (items 22036-54) are required.

THOMAFLUID®-pipe screw fittings of the MULTIFIT®-EMP-series can be screwed into THOMAFLUID®-valves, cocks, and flowmeters of the MULTIFIT®-EMP-series.

Assembly:

The connection principle entails pushing the pipe against the inner edge of the connector and sealing with a sealing ring. The pipe is secured in place by a cutting ring (PEEK), which is forced against the pipe by a nut. The more the nut is screwed onto the connector body, the more the slotted cutting ring wedges the pipe. The result is a tight, friction-locked connection, which can be released at any time. The design concept eliminates the dead volume. It also has no effect on the flow because the inside diameter is identical to that of the pipe.

If flexible tubing has have to be adapted using THOMAFLUID®-pipe screw fittings, first the carrying brackets have to be put in the flexible tubes. Afterwards, the fixed assembly is done by tightening the cap nut.

PP (Polypropylene)

Extremely good impact toughness and notch impact strength

Higher hardness and stiffness as well as better resilience than PE

Thermoforming possible

Very good dielectrical properties

Good resistance to alcohols, ketones, conc. acids and alkalis

Not stable to aromatic hydrocarbons, fats and oils, halogenes

Autoclavable

Resistant to hydrolysis

Physiologically safe

Colour: grey

Density: 0.90 g/cm3

Temperature range: +5 to +90 °C

Shore hardness D: 72°

Max. operating pressure: 10 bar at +20 °C

Water absorption: <0.05 %

Tensile strength: 25 - 40 N/mm2

Elongation at break: 800 %

Surface resistance: >1013 Ohm

Melt flow index MFR: 0.3 g/10 min.

PVDF (Polyvinylidene fluoride)

High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.

High impact toughness even at low temperatures

Good breakdown strength

Low dielectric loss factor

Highest mechanical stability and stiffness

Meeting highest purity requirements

Comply with the guidelines from FDA and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.

Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualities

Outstanding resistance to UV, weather and aging

Flame-resistant

High thermal stability

Resistant to alcohols, fats and oils, halogenes, alkalis, acids

Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid

Colour: nature, slightly translucent

Density: 1.75 g/cm3

Temperature range: -40 to +140 °C

Shore hardness D: 79°

Max. operating pressure: 10 bar at +20 °C

Water absorption: <0.04 %

Tensile strength: 38 - 50 N/mm2

Surface resistance: >1013 Ohm

Melt flow index MFR: 6 g/10 min.

PTFE (Polytetrafluoroethylene)

Heavy-duty plastic

Antiadhesive surface

Outstanding sliding properties

Lowest friction coefficient of all fluorinated plastics

Excellent stress cracking resistance

Excellent weather resistance

Highest gas-tightness

No water absorption

Very good dielectric properties independent of frequency and temperature

Very good electrical insulating capacity also at air humidity

High tracking resistance

Non-combustible

Colour: milky, white

Density: 2.20 g/cm3

Temperature range: -200 to +150 °C

Shore hardness D: 60°

Max. operating pressure: 6 bar at +20 °C

Tearing strength: 30 - 40 N/mm2

Elongation at break: 300 %

Water absorption: 0.01 %

Surface resistance: >1017 Ohm

Item Image Pipe outside Ø
mm
Internal thread l1
mm
L
mm
WAF
mm
Material Unit
piece
Price
Euro*
Buy
107101
4 G 1/8" 10 40 14 PP 10 75.00
10711
4 G 1/8" 10 40 14 PTFE 5 146.00
10712
4 G 1/8" 10 40 14 PVDF 5 98.00
10713
4 G 1/4" 15 46 17 PP 10 80.00
10714
4 G 1/4" 15 46 17 PTFE 5 156.00
10715
4 G 1/4" 15 46 17 PVDF 5 105.00
10716
4 G 3/8" 15 46 22 PP 10 145.00
10717
4 G 3/8" 15 46 22 PTFE 5 190.00
10718
4 G 3/8" 15 46 22 PVDF 5 145.00
10719
4 G 1/2" 16 48 27 PP 10 160.00
10720
4 G 1/2" 16 48 27 PTFE 5 226.00
10721
4 G 1/2" 16 48 27 PVDF 5 168.00
22415
6 G 1/8" 10 40 14 PP 10 75.00
22416
6 G 1/8" 10 40 14 PTFE 5 141.00
22417
6 G 1/8" 10 40 14 PVDF 5 130.00
22419
6 G 1/4" 15 46 17 PP 10 84.00
22420
6 G 1/4" 15 46 17 PTFE 5 143.00
22421
6 G 1/4" 15 46 17 PVDF 5 130.00
22423
6 G 3/8" 15 46 22 PP 10 126.00
22424
6 G 3/8" 15 46 22 PTFE 3 126.00
22425
6 G 3/8" 15 46 22 PVDF 3 117.00
22427
6 G 1/2" 16 48 27 PP 10 137.00
22428
6 G 1/2" 16 48 27 PTFE 3 144.00
22429
6 G 1/2" 16 48 27 PVDF 3 132.00
22431
8 G 1/8" 10 40 17 PP 10 140.00
22432
8 G 1/8" 10 40 17 PTFE 3 144.00
22433
8 G 1/8" 10 40 17 PVDF 3 132.00
22435
8 G 1/4" 15 46 17 PP 10 137.00
22436
8 G 1/4" 15 46 17 PTFE 3 144.00
22437
8 G 1/4" 15 46 17 PVDF 3 132.00
22439
8 G 3/8" 15 46 22 PP 10 150.00
22440
8 G 3/8" 15 46 22 PTFE 3 156.00
22441
8 G 3/8" 15 46 22 PVDF 3 141.00
22443
8 G 1/2" 16 48 27 PP 10 160.00
22444
8 G 1/2" 16 48 27 PTFE 2 118.00
22445
8 G 1/2" 16 48 27 PVDF 2 106.00
22447
10 G 1/8" 10 43 19 PP 10 160.00
22448
10 G 1/8" 10 43 19 PTFE 2 117.00
22449
10 G 1/8" 10 43 19 PVDF 2 106.00
22451
10 G 1/4" 15 49 19 PP 10 158.00
22452
10 G 1/4" 15 49 19 PTFE 2 118.00
22453
10 G 1/4" 15 49 19 PVDF 2 106.00
22455
10 G 3/8" 15 49 22 PP 10 160.00
22456
10 G 3/8" 15 49 22 PTFE 2 118.00
22457
10 G 3/8" 15 49 22 PVDF 2 106.00
22459
10 G 1/2" 16 50 27 PP 10 160.00
22460
10 G 1/2" 16 50 27 PTFE 2 117.00
22461
10 G 1/2" 16 50 27 PVDF 2 106.00
22463
12 G 1/4" 15 51 22 PP 10 220.00
22464
12 G 1/4" 15 51 22 PTFE 2 120.00
22465
12 G 1/4" 15 51 22 PVDF 2 108.00
22467
12 G 3/8" 15 51 22 PP 10 220.00
22468
12 G 3/8" 15 51 22 PTFE 2 122.00
22469
12 G 3/8" 15 51 22 PVDF 2 112.00
22471
12 G 1/2" 16 52 27 PP 5 115.00
22472
12 G 1/2" 16 52 27 PTFE 2 127.00
22473
12 G 1/2" 16 52 27 PVDF 2 116.00
22475
14 G 1/4" 15 52 27 PP 5 145.00
22476
14 G 1/4" 15 52 27 PTFE 1 71.00
22477
14 G 1/4" 15 52 27 PVDF 1 64.00
22479
14 G 3/8" 15 52 27 PP 5 145.00
22480
14 G 3/8" 15 52 27 PTFE 1 85.00
22481
14 G 3/8" 15 52 27 PVDF 1 77.00
22483
14 G 1/2" 16 53 27 PP 5 160.00
22484
14 G 1/2" 16 53 27 PTFE 1 94.00
22485
14 G 1/2" 16 53 27 PVDF 1 85.00
22487
6 M10 x 1,5 10 40 14 PP 10 a.A.
22488
6 M10 x 1,5 10 40 14 PTFE 5 a.A.
22489
6 M10 x 1,5 10 40 14 PVDF 5 131.00
22491
6 M12 x 1,5 15 46 17 PP 10 a.A.
22492
6 M12 x 1,5 15 46 17 PTFE 5 a.A.
22493
6 M12 x 1,5 15 46 17 PVDF 5 a.A.
22495
6 M16 x 1,5 15 46 22 PP 10 a.A.
22496
6 M16 x 1,5 15 46 22 PTFE 5 a.A.
22497
6 M16 x 1,5 15 46 22 PVDF 5 a.A.
22499
6 M18 x 1,5 15 46 24 PP 10 a.A.
22500
6 M18 x 1,5 15 46 24 PTFE 5 a.A.
22501
6 M18 x 1,5 15 46 24 PVDF 5 a.A.
22503
8 M10 x 1,5 10 40 17 PP 10 a.A.
22504
8 M10 x 1,5 10 40 17 PTFE 5 a.A.
22505
8 M10 x 1,5 10 40 17 PVDF 5 138.00
22507
8 M12 x 1,5 15 46 17 PP 10 a.A.
22508
8 M12 x 1,5 15 46 17 PTFE 5 a.A.
22509
8 M12 x 1,5 15 46 17 PVDF 5 a.A.
22511
8 M16 x 1,5 15 46 22 PP 10 a.A.
22512
8 M16 x 1,5 15 46 22 PTFE 3 a.A.
22513
8 M16 x 1,5 15 46 22 PVDF 3 a.A.
22515
8 M18 x 1,5 15 46 24 PP 10 a.A.
22516
8 M18 x 1,5 15 46 24 PTFE 3 a.A.
22517
8 M18 x 1,5 15 46 24 PVDF 3 a.A.
22519
10 M10 x 1,5 10 43 19 PP 10 92.00
22520
10 M10 x 1,5 10 43 19 PTFE 3 a.A.
22521
10 M10 x 1,5 10 43 19 PVDF 5 169.00
22523
10 M12 x 1,5 15 49 19 PP 10 a.A.
22524
10 M12 x 1,5 15 49 19 PTFE 3 a.A.
22525
10 M12 x 1,5 15 49 19 PVDF 3 a.A.
22527
10 M16 x 1,5 15 49 22 PP 10 a.A.
22528
10 M16 x 1,5 15 49 22 PTFE 3 a.A.
22529
10 M16 x 1,5 15 49 22 PVDF 3 a.A.
22531
10 M18 x 1,5 15 49 24 PP 10 a.A.
22532
10 M18 x 1,5 15 49 24 PTFE 2 a.A.
22533
10 M18 x 1,5 15 49 24 PVDF 2 a.A.
22535
12 M12 x 1,5 15 51 22 PP 10 a.A.
22536
12 M12 x 1,5 15 51 22 PTFE 2 a.A.
22537
12 M12 x 1,5 15 51 22 PVDF 2 112.00
22539
12 M14 x 1,5 15 51 22 PP 10 a.A.
22540
12 M14 x 1,5 15 51 22 PTFE 2 a.A.
22541
12 M14 x 1,5 15 51 22 PVDF 2 a.A.
22543
12 M16 x 1,5 15 51 22 PP 10 a.A.
22544
12 M16 x 1,5 15 51 22 PTFE 2 103.00
22545
12 M16 x 1,5 15 51 22 PVDF 2 a.A.
22547
12 M18 x 1,5 15 51 24 PP 10 a.A.
22548
12 M18 x 1,5 15 51 24 PTFE 2 a.A.
22549
12 M18 x 1,5 15 51 24 PVDF 2 a.A.
22551
14 M12 x 1,5 15 52 27 PP 5 95.00
22552
14 M12 x 1,5 15 52 27 PTFE 2 a.A.
22553
14 M12 x 1,5 15 52 27 PVDF 2 a.A.
22555
14 M14 x 1,5 15 52 27 PP 10 a.A.
22556
14 M14 x 1,5 15 52 27 PTFE 2 a.A.
22557
14 M14 x 1,5 15 52 27 PVDF 2 a.A.
22559
14 M16 x 1,5 15 52 27 PP 5 a.A.
22560
14 M16 x 1,5 15 52 27 PTFE 2 a.A.
22561
14 M16 x 1,5 15 52 27 PVDF 2 a.A.
22563
14 M18 x 1,5 15 52 27 PP 5 a.A.
22564
14 M18 x 1,5 15 52 27 PTFE 2 a.A.
22565
14 M18 x 1,5 15 52 27 PVDF 2 a.A.
Accessories
Similar products
Viewed