HDPE Chemical Tubing - calibrated | Reichelt Chemietechnik

Application area Protective tubing, compressed air control tubing, low pressure lines, excess... more

Application area

Protective tubing, compressed air control tubing, low pressure lines, excess pressure tubing, riser tube for aerosol valves, water technology, pneumatic conduits at laser equipment, supply lines

Product specification

Considerably lower tendency to stress cracking compared to LDPE

Excellent mechanical properties, calibrated

Extremely good impact strength

Lowest static friction (good coefficient of sliding friction)

Lowest water absorption

Very good dielectric properties

High chemical resistance

High purity

Physiologically safe

High density

Highest stiffness

High working pressure

Technical specification

Material: HDPE (high density polyethylene)

Colour: natural

Shore hardness D: 67° (ISO 868)

Temperature range: -30 to +80 °C, for a short time +100 °C

Density: 0.96 g/cm³ (ISO 1183-D)

Bending strength: 1100 MPa (ISO 178)

Tensile strength: 36 MPa (ISO 527)

Elongation at break: 950 % (ISO 527)

Softening temperature: +129 °C (ISO 306-A/120)

Tolerances inside Ø and outside Ø: ±0.10 mm

Close menu

No additional information available.

Zum anzeigen der Varianten bitte im Querformat benutzen.

Item	Inside Ø mm	Outside Ø mm	Max. op. pressure¹ bar	Min. bending radius mm	Unit m	Price Euro*
330095	2	4	33	30	5	112.00
330096	2	4	33	30	15	280.00
330097	4	6	20	40	5	114.00
330098	4	6	20	40	15	286.00
330099	6	8	14	50	5	116.00
330100	6	8	14	50	15	290.00
330101	8	10	11	75	5	122.00
330102	8	10	11	75	15	300.00
330103	10	12	9	100	5	130.00
330104	10	12	9	100	15	324.00