PTFE Sealing Tape

Product specification Manufactured of virgin PTFE finest powder. Negative cold flow... more

Product specification

Manufactured of virgin PTFE finest powder.

Negative cold flow properties are strongly reduced by stretching of the fibre structure resulting in outstanding sealing properties.

Resistant to aging, weather, ozone, and light, as it is produced without filler.

Flat sealing tape (assembly tape) is fitted with adhesion strips for fastening.

Irregularities are evened up by the tape.

Larger uneven patches should be evened up with a thicker tape. If this is not sufficient, underfeeding is required.

Good adhesion of the adhesive surface of the assembly tape on clean, dry sealing surface.

The sealing tape (assembly tape) has to be put in place in such a way that the tape ends cross in front of a bolt.

Impact use is not recommended.

For use with glass fittings, a toothing or bevel cutting should be performed.

Technical specification

Material: PTFE (polytetrafluoroethylene)

Material features: soft and flexible

Colour: white

Temperature range: -240 to +260 °C

Regulations: TÜV inspection, BAM inspection, DVGW-registered, FDA 21 CFR 177.1550, EG 1935/2004

No additional information available.

Item	Width mm	Stärke mm	Einheit m	Price Euro*
19500	3	1,5	5	37.00
19501	3	1,5	10	67.00
19502	3	1,5	25	132.00
19503	5	2	5	48.00
19504	5	2	10	86.00
19505	5	2	25	179.00
19506	7	2,5	5	61.00
19507	7	2,5	10	105.00
19508	7	2,5	25	223.00
19509	10	3	5	86.00
19510	10	3	10	130.00
19511	10	3	25	239.00
19512	12	4	5	119.00
19513	12	4	10	206.00
19514	12	4	25	354.00
19515	14	5	5	132.00
19516	14	5	10	223.00
19517	14	5	25	368.00
19518	17	6	5	149.00
19519	17	6	10	250.00
19520	17	6	25	395.00
19521	20	7	5	181.00
19522	20	7	10	290.00
19523	20	7	25	436.00