Snap-in Spacer made of PA - with Locking Top

Snap-in Spacer made of PA - with Locking Top

Product specification For circuit boards or plates with thickness of 1.5 mm Side 1: with... more

Close menu

Product specification

For circuit boards or plates with thickness of 1.5 mm

Side 1: with locking top Ø 6 mm, borehole 5 mm

Side 2: snap-in for circuit board thickness of 1.5 mm, borehole 3.2 mm

Material: PA 6.6 (polyamide 6.6)

Colour: black

General Information PA 6 .6 Good coefficient of sliding friction High mechanical... more

Close menu

General Information PA 6.6

Good coefficient of sliding friction

High mechanical stability and fatigue strength

Excellent resilience

Impact resistant

Resistant to abrasion

Resistant to cold

Chemical features:

Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alkohols, esters, ketones, ethers and amines.

Material specification:

The polyamides are universal materials for mechanical functional parts

The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Insulating properties and an amazingly high tensile strength

PA can also be used in the food processing industry and in medical fields

Resistant to corrosion and abrasion

Non-toxic and unmagnetic

Vibration-damping

PA 6.6 features the same chemical resistance as PA 6

PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6

However, PA 6.6 is a little less impact resistant compared to PA 6

Material: PA 6.6 (polyamide 6.6)

Colour: natural

Density: 1.14 g/cm³ (DIN 53479)

Temperature range: -30 to +100 °C

Melting temperature: +255 °C (DIN 53736)

Yield stress: 83 N/mm² (ISO 527)

Elongation at break: 30 % (DIN 53455)

Bending strength: 115 N/mm² (DIN 53452)

Elastic modulus: 3,000 N/mm² (DIN 53457)

Impact resistance (Charpy): without break (DIN 53453)

Notch impact strength (Izod): 60 J/m (ASTM D 256)

Coefficient of sliding friction against steel (dry): 0.35 - 0.42

Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483)

Volume resistivity: 10¹⁵ Ohm x cm (DIN 53482)

Surface resistance: approx. 10¹⁴ Ohm (DIN 53482)

Comparative tracking index (CTI): >600 V (IEC 112)

Dielectric strength: approx. 40 kV/mm (DIN 53481)

Water absorption (saturation): approx. 8.5 % (DIN 53495)

Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

Item	L mm	h mm	h1 mm	Unit piece	Price Euro*
338835	5	1,5	1,5	10	45.00
338836	5	1,5	1,5	25	99.00
338837	5	2	2	10	45.00
338838	5	2	2	25	99.00
338839	5	2,5	2,5	10	45.00
338840	5	2,5	2,5	25	99.00
338841	5	3	3	10	45.00
338842	5	3	3	25	99.00
338843	8	1,5	1,5	10	45.00
338844	8	1,5	1,5	25	99.00
338845	8	2	2	10	45.00
338846	8	2	2	25	99.00
338847	8	2,5	2,5	10	45.00
338848	8	2,5	2,5	25	99.00
338849	8	3	3	10	45.00
338850	8	3	3	25	99.00
338851	10	1,5	1,5	10	45.00
338852	10	1,5	1,5	25	99.00
338853	10	2	2	10	45.00
338854	10	2	2	25	99.00
338855	10	2,5	2,5	10	45.00
338856	10	2,5	2,5	25	99.00
338857	10	3	3	10	45.00
338858	10	3	3	25	99.00
338859	12	1,5	1,5	10	52.00
338860	12	1,5	1,5	25	114.00
338861	12	2	2	10	52.00
338862	12	2	2	25	114.00
338863	12	2,5	2,5	10	52.00
338864	12	2,5	2,5	25	114.00
338865	12	3	3	10	52.00
338866	12	3	3	25	114.00
338867	15	1,5	1,5	10	52.00
338868	15	1,5	1,5	25	114.00
338869	15	2	2	10	52.00
338870	15	2	2	25	114.00
338871	15	2,5	2,5	10	52.00
338872	15	2,5	2,5	25	114.00
338873	15	3	3	10	52.00
338874	15	3	3	25	114.00
338883	18	1,5	1,5	10	52.00
338884	18	1,5	1,5	25	114.00
338885	18	2	2	10	52.00
338886	18	2	2	25	114.00
338887	18	2,5	2,5	10	52.00
338888	18	2,5	2,5	25	114.00
338889	18	3	3	10	52.00
338890	18	3	3	25	114.00
338891	20	1,5	1,5	10	52.00
338892	20	1,5	1,5	25	114.00
338893	20	2	2	10	52.00
338894	20	2	2	25	114.00
338895	20	2,5	2,5	10	52.00
338896	20	2,5	2,5	25	114.00
338897	20	3	3	10	52.00
338898	20	3	3	25	114.00