Washer made of PA (Ø 16.0 - 18.5) | Reichelt Chemietechnik

Preview: Washer made of PA (Ø 16.0 - 18.5)

Close menu

No additional information available.

General Information Universal washers or spacer rings Ideal sliding rings between rotating... more

Close menu

General Information

Universal washers or spacer rings

Ideal sliding rings between rotating parts

Insulate moisture and electricity

Absorb vibrations

Chemical features:

Resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alkohols, esters, ketones, ethers and amines; good resistance to weak alkalis, but only moderate resistance to strong alkalis; limited resistance to weak mineral and organic acids; not resistant to oxidizing acids, strong mineral and organic acids as well as phenols; limited resistance to hydrolysis

Material specification:

Polyamide is an elastic, tough, loadable, but notch-sensitive material

Impact resistant

Resistant to abrasion and cold

High fatigue strength and excellent resilience

High wear resistance and good mechanical damping capacity

Insulating properties and an amazingly high tensile strength

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Polyamide can also be used in the food processing industry and in medical fields

PA 6 features a higher impact resistance compared to PA 6.6

PA 6 has the highest water absorption of all common plastics up to 9 to 10 % (followed by PA 6.6 with 8 to 9 %), thus considerably increased toughness, flexibility and elongation. However, the strength of the material can therefore be reduced by up to 10 %.

Material: PA 6 (polyamide 6)

Colour: natural

Density: approx. 1.14 g/cm³

Temperature range: -40 to +85 °C, for a short time +180 °C

Melting temperature: +220 °C (ISO 11357)

Yield stress: 75 MPa (ISO 527)

Elongation at break: >50 % (ISO 527)

Elastic modulus: 3,200 MPa (ISO 527)

Impact resistance: without break (DIN 53453)

Notch impact strength (Charpy): >3 kJ/m² (ISO 179)

Ball pressure hardness: 160 N/mm² (ISO 2039-1)

Shore hardness D: 82° (DIN 53505)

Dielectric strength: 20 kV/mm (IEC 60243)

Dielectric constant: 3.9 at 50 Hz (IEC 60250)

Surface resistance: 10¹³ Ohm (IEC 60093)

Volume resistivity: 10¹⁵ Ohm x cm (IEC 60093)

Comparative tracking index (CTI): >600 (DIN 53480)

Dielectric loss factor (at 50 Hz): 0.02 (specimen dry)

Water absorption: up to 10 % (during storage in water) (DIN 53472)

Flammability rating: UL 94 HB

Item	d mm	D mm	h mm	Unit piece	Price Euro*
311048	16	20	0,8	50	49.00
311049	16	20	0,8	100	83.00
311052	16	21	1	50	45.00
311053	16	21	1	100	75.00
311054	16	21	2	50	57.00
311055	16	21	2	100	97.00
311058	16	25	1	50	48.00
311059	16	25	1	100	80.00
311062	16,2	24	1	25	63.00
311063	16,2	24	1	50	103.00
311064	16,5	32	1	25	39.00
311065	16,5	32	1	50	71.00
311076	17	24	2	10	28.00
311077	17	24	2	25	65.00
311088	17,5	20	2	50	52.00
311089	17,5	20	2	100	88.00
311092	17,5	32	1,5	50	47.00
311093	17,5	32	1,5	100	79.00
311094	18	22	0,5	50	45.00
311095	18	22	0,5	100	78.00
311096	18	22	1	25	48.00
311097	18	22	1	50	82.00
311102	18	24	2	25	36.00
311103	18	24	2	50	61.00
311106	18	30	1	25	43.00
311107	18	30	1	50	73.00
311108	18	38	1	25	35.00
311109	18	38	1	50	56.00
311110	18,5	30	1,5	25	58.00
311111	18,5	30	1,5	50	97.00