PTFE Chemical Tubing - Thin-Walled

General Information

For use in analytical technology, biotechnology, medical engineering, microelectronics, process technology and chem. process engineering.

For conveyance of acids, alkalis, salt solutions, also of strongly chloride-containing ones, and solvents, also halogenated ones. For use in the low-pressure part of HPLC systems, particularly in metal-free set-ups and for low-pressure liquid chromatography.

Conveying tubing

Very good chemical resistance

Very high temperature resistance

Very good coefficient of sliding friction

Antiadhesive surface

Very good dielectric properties

Highest gas-tightness

Low mechanical stability (without fillers)

Flexible, impact resistant, and resistant to aging

Free of extractable constituents, physiologically safe, and biocompatible.

PTFE is a fluoroplast with excellent resistance to acids, alkalis, solvents and gases. Depending on the degree of mechanical and chemical loading the material is heat-resistant up to +260 °C. PTFE is not resistant to fluorine compounds and molten alkali metals at higher temperatures.

Material: PTFE (polytetrafluoroethylene)

Colour: milky, weakly translucent

Temperature range: -200 to +260 °C, for a short time +280 °C

Tolerances inside Ø:

0 - 0.9 mm: ±0.07 mm

1 - 2.9 mm: ±0.15 mm

3 - 5 mm: ±0.20 mm

5 - 7 mm: ±0.25 mm

7 - 10 mm: ±0.30 mm

15 - 20 mm: ±0.40 mm

Tolerances wall thickness:

0.1 - 0.3 mm: ±0.07 mm

0.3 - 0.6 mm: ±0.10 mm

0.6 - 1.0 mm: ±0.15 mm

1.0 - 2.0 mm: ±0.20 mm