Snap-in Spacer made of PA - double-locking, Series K

Snap-in Spacer made of PA - double-locking, Series K

Product specification Side 1: circuit board thickness: 2.0 mm; borehole diameter: 4 mm Side... more

Close menu

Product specification

Side 1: circuit board thickness: 2.0 mm; borehole diameter: 4 mm

Side 2: circuit board thickness: 0.5 - 2.3 mm; borehole diameter: 4.8 mm

Material: PA 6.6 (polyamide 6.6)

Colour: natural

General Information PA 6 .6 Good coefficient of sliding friction High mechanical... more

Close menu

General Information PA 6.6

Good coefficient of sliding friction

High mechanical stability and fatigue strength

Excellent resilience

Impact resistant

Resistant to abrasion

Resistant to cold

Chemical features:

Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alkohols, esters, ketones, ethers and amines.

Material specification:

The polyamides are universal materials for mechanical functional parts

The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Insulating properties and an amazingly high tensile strength

PA can also be used in the food processing industry and in medical fields

Resistant to corrosion and abrasion

Non-toxic and unmagnetic

Vibration-damping

PA 6.6 features the same chemical resistance as PA 6

PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6

However, PA 6.6 is a little less impact resistant compared to PA 6

Material: PA 6.6 (polyamide 6.6)

Colour: natural

Density: 1.14 g/cm³ (DIN 53479)

Temperature range: -30 to +100 °C

Melting temperature: +255 °C (DIN 53736)

Yield stress: 83 N/mm² (ISO 527)

Elongation at break: 30 % (DIN 53455)

Bending strength: 115 N/mm² (DIN 53452)

Elastic modulus: 3,000 N/mm² (DIN 53457)

Impact resistance (Charpy): without break (DIN 53453)

Notch impact strength (Izod): 60 J/m (ASTM D 256)

Coefficient of sliding friction against steel (dry): 0.35 - 0.42

Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483)

Volume resistivity: 10¹⁵ Ohm x cm (DIN 53482)

Surface resistance: approx. 10¹⁴ Ohm (DIN 53482)

Comparative tracking index (CTI): >600 V (IEC 112)

Dielectric strength: approx. 40 kV/mm (DIN 53481)

Water absorption (saturation): approx. 8.5 % (DIN 53495)

Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

Item	L mm	Unit piece	Price Euro*
338909	6,4	25	65.00
338910	6,4	50	120.00
338911	7,9	25	65.00
338912	7,9	50	120.00
338913	9,4	25	65.00
338914	9,4	50	120.00
338915	11,9	25	88.00
338916	11,9	50	152.00
338917	12,7	25	88.00
338918	12,7	50	152.00
338919	15,9	25	88.00
338920	15,9	50	152.00
338921	19,1	25	65.00
338922	19,1	50	120.00
338923	22,2	25	65.00
338924	22,2	50	120.00
338925	25,4	25	71.00
338926	25,4	50	122.00
338927	28,6	25	71.00
338928	28,6	50	122.00