Connecting Links for Single-Strand Roller Chains - not stainless

Product specification Versions: a) Connecting link with spring clip: No. 11/E b) Cranked... more

Close menu

Product specification

Versions:

a) Connecting link with spring clip: No. 11/E

b) Cranked link with cottered pin: No. 12/L

c) Cranked double link: No. 15/C

Technical specification

Material: high-quality special chain steel

Dimensions: according to DIN ISO 606 / DIN 8187

General Information Power transmission, bridging of large centre distances and alteration of... more

Close menu

General Information

Power transmission, bridging of large centre distances and alteration of transmission ratios.

Not stainless chains for general use in machinery and plant engineering, as well as in model making.

Stainless chains especially for food processing companies and outdoor applications.

Special chains with one-piece inner links and stainless steel outer links, if low weight and/or particularly high degree of cleanliness is required.

Chains DIN ISO 606 / DIN 8187 - not stainless – can be chosen using the performance diagram. The stainless chains are to be selected considering the breaking load or working load. The application should use no more than one sixth of the stated breaking load, to avoid an early elongation. The working load is to be calculated with an operating factor for the shock load (operating factors and notes regarding the design on the internet).

The often used chain sizes 06 B-1 and 08 B-1 should be preferred wherever possible also for low-stressed drives as smaller chains are more expensive.

The small sizes 081 and 083 are less commonly used. For this purpose only plastic chain wheels are available ex stock.

Chain wheels must be aligned (precisely positioned).

Chain tension has to be adjusted (the slack span should amount to approx. 2 % of the center distance with common applications).

Roller chains require lubrication (permanent or at intervals).

An even number of links (incl. connecting link) is to be preferred. An uneven number of links can only be realized by using a cranked link that reduces the load bearing capacity of the chain by 20%.

Item	Connecting link	DIN ISO	Teilung (p) mm	Innere Breite (b1) mm	Gewicht g	Einheit Stück	Price Euro*
700012	11/E	04	6	2,8	0,6	2	7.00
700013	11/E	04	6	2,8	0,6	6	13.00
700014	11/E	05 B-1	8	3	2	2	7.00
700015	11/E	05 B-1	8	3	2	6	13.00
700016	11/E	06 B-1	9,5	5,6	4	2	5.00
700017	11/E	06 B-1	9,5	5,6	4	6	10.00
700018	11/E	081	12,7	3,2	4	2	5.00
700019	11/E	081	12,7	3,2	4	6	7.00
700020	11/E	083	12,7	4,8	5	2	11.00
700021	11/E	083	12,7	4,8	5	6	26.00
700022	11/E	08 B-1	12,7	7,9	9	2	5.00
700023	11/E	08 B-1	12,7	7,9	9	6	10.00
700024¹	12/L	06 B-1	9,5	5,6	4	2	7.00
700025¹	12/L	06 B-1	9,5	5,6	4	6	13.00
700026¹	12/L	081	12,7	3,2	4	2	7.00
700027¹	12/L	081	12,7	3,2	4	6	17.00
700028¹	12/L	083	12,7	4,8	6	2	20.00
700029¹	12/L	083	12,7	4,8	6	6	45.00
700030¹	12/L	08 B-1	12,7	7,9	9	2	9.00
700031¹	12/L	08 B-1	12,7	7,9	9	6	17.00
700032¹	15/C	04	6	2,8	1,4	2	13.00
700033¹	15/C	04	6	2,8	1,4	6	29.00
700034¹	15/C	05 B-1	8	3	2	2	13.00
700035¹	15/C	05 B-1	8	3	2	6	29.00
700036¹	15/C	06 B-1	9,5	5,6	9	2	9.00
700037¹	15/C	06 B-1	9,5	5,6	9	6	17.00
700038¹	15/C	081	12,7	3,2	8	2	7.00
700039¹	15/C	081	12,7	3,2	8	6	13.00
700040¹	15/C	083	12,7	4,8	11	2	20.00
700041¹	15/C	083	12,7	4,8	11	6	45.00
700042¹	15/C	08 B-1	12,7	7,9	18	2	13.00
700043¹	15/C	08 B-1	12,7	7,9	18	6	29.00