window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Washer (DIN 125) made of PA | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Washer (DIN 125) made of PA

Technical specification Material: PA 6 (polyamide 6) Colour: natural... more

Technical specification

Material: PA 6 (polyamide 6)

Colour: natural

Regulations: DIN 125, DIN 34815, ISO 7089

General Information Universal washers or spacer rings Ideal sliding rings between rotating... more

General Information

Universal washers or spacer rings

Ideal sliding rings between rotating parts

Insulate moisture and electricity

Absorb vibrations

Chemical features:

Resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alkohols, esters, ketones, ethers and amines; good resistance to weak alkalis, but only moderate resistance to strong alkalis; limited resistance to weak mineral and organic acids; not resistant to oxidizing acids, strong mineral and organic acids as well as phenols; limited resistance to hydrolysis

Material specification:

Polyamide is an elastic, tough, loadable, but notch-sensitive material

Impact resistant

Resistant to abrasion and cold

High fatigue strength and excellent resilience

High wear resistance and good mechanical damping capacity

Insulating properties and an amazingly high tensile strength

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Polyamide can also be used in the food processing industry and in medical fields

PA 6 features a higher impact resistance compared to PA 6.6

PA 6 has the highest water absorption of all common plastics up to 9 to 10 % (followed by PA 6.6 with 8 to 9 %), thus considerably increased toughness, flexibility and elongation. However, the strength of the material can therefore be reduced by up to 10 %.

Material: PA 6 (polyamide 6)

Colour: natural

Density: approx. 1.14 g/cm3

Temperature range: -40 to +85 °C, for a short time +180 °C

Melting temperature: +220 °C (ISO 11357)

Yield stress: 75 MPa (ISO 527)

Elongation at break: >50 % (ISO 527)

Elastic modulus: 3,200 MPa (ISO 527)

Impact resistance: without break (DIN 53453)

Notch impact strength (Charpy): >3 kJ/m2 (ISO 179)

Ball pressure hardness: 160 N/mm2 (ISO 2039-1)

Shore hardness D: 82° (DIN 53505)

Dielectric strength: 20 kV/mm (IEC 60243)

Dielectric constant: 3.9 at 50 Hz (IEC 60250)

Surface resistance: 1013 Ohm (IEC 60093)

Volume resistivity: 1015 Ohm x cm (IEC 60093)

Comparative tracking index (CTI): >600 (DIN 53480)

Dielectric loss factor (at 50 Hz): 0.02 (specimen dry)

Water absorption: up to 10 % (during storage in water) (DIN 53472)

Flammability rating: UL 94 HB

Item Image For thread d
mm
D
mm
h
mm
Unit
piece
Price
Euro*
Buy
305828
M1,6 1,7 4 0,3 50 24.00
305829
M1,6 1,7 4 0,3 100 40.00
305832
M1,7 1,8 4,5 0,3 50 24.00
305835
M1,7 1,8 4,5 0,3 100 40.00
305838
M2 2,2 5 0,3 50 6.00
305841
M2 2,2 5 0,3 100 10.00
308940
M2,3 2,5 6 0,5 50 6.00
308941
M2,3 2,5 6 0,5 100 10.00
308942
M2,5 2,7 6 0,5 50 6.00
308943
M2,5 2,7 6 0,5 100 10.00
305844
M2,6 2,8 7 0,5 50 8.00
305847
M2,6 2,8 7 0,5 100 14.00
301523
M3 3,2 7 0,5 50 6.00
301524
M3 3,2 7 0,5 100 10.00
305850
M3,5 3,7 8 0,5 50 8.00
305853
M3,5 3,7 8 0,5 100 14.00
301525
M4 4,3 9 0,8 50 8.00
301526
M4 4,3 9 0,8 100 14.00
301527
M5 5,3 10 1 50 8.00
301528
M5 5,3 10 1 100 14.00
308946
M6 6,4 12 1,6 50 8.00
308947
M6 6,4 12 1,6 100 14.00
301529
M6 6,4 12,5 1,6 50 8.00
301530
M6 6,4 12,5 1,6 100 14.00
308948
M7 7,4 14 1,5 50 8.00
308949
M7 7,4 14 1,5 100 14.00
308950
M8 8,4 16 1,6 50 9.00
308951
M8 8,4 16 1,6 100 16.00
301531
M8 8,4 17 1,6 50 10.00
301532
M8 8,4 17 1,6 100 18.00
308952
M10 10,5 20 2 50 10.00
308953
M10 10,5 20 2 100 18.00
301533
M10 10,5 21 2 50 11.00
301534
M10 10,5 21 2 100 19.00
305886
M12 13 24 2,5 50 22.00
305889
M12 13 24 2,5 100 38.00
308954
M14 15 30 3 50 30.00
308955
M14 15 30 3 100 52.00
305892
M16 17 30 3 50 36.00
305895
M16 17 30 3 100 60.00
308956
M18 19 34 3 50 36.00
308957
M18 19 34 3 100 60.00
308958
M20 21 37 3 50 38.00
308959
M20 21 37 3 100 74.00
305898
M22 23 39 3 50 42.00
305901
M22 23 39 3 100 82.00
308960
M24 25 44 4 25 30.00
308961
M24 25 44 4 50 52.00
308962
M26 27 50 4 10 42.00
308963
M26 27 50 4 25 86.00
308964
M27 28 50 4 25 42.00
308965
M27 28 50 4 50 70.00
308966
M30 31 56 4 25 38.00
308967
M30 31 56 4 50 66.00
Similar products
Viewed