Wing Screw (DIN 316) made of PA - rounded wings

Wing Screw (DIN 316) made of PA - rounded wings

Technical specification Material: PA 6.6 (polyamide 66) Colour: natural... more

Close menu

Technical specification

Material: PA 6.6 (polyamide 66)

Colour: natural

Regulations: DIN 316

General Information Good coefficient of sliding friction High mechanical stability and... more

Close menu

General Information

Good coefficient of sliding friction

High mechanical stability and fatigue strength

Excellent resilience

Impact resistant

Resistant to abrasion

Resistant to cold

Chemical features:

Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines.

Material specification:

The polyamides are universal materials for mechanical functional parts

The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Insulating properties and an amazingly high tensile strength

PA can also be used in the food processing industry and in medical fields

Resistant to corrosion and abrasion

Non-toxic and unmagnetic

Vibration-damping

PA 6.6 features the same chemical resistance as PA 6

PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6

However, PA 6.6 is a little less impact resistant compared to PA 6

Material: PA 6.6 (polyamide 6.6)

Colour: natural

Density: 1.14 g/cm³ (DIN 53479)

Temperature range: -30 to +100 °C

Melting temperature: +255 °C (DIN 53736)

Yield stress: 83 N/mm² (ISO 527)

Elongation at break: 30 % (DIN 53455)

Bending strength: 115 N/mm² (DIN 53452)

Elastic modulus: 3,000 N/mm² (DIN 53457)

Impact resistance (Charpy): without break (DIN 53453)

Notch impact strength (Izod): 60 J/m (ASTM D 256)

Coefficient of sliding friction against steel (dry): 0.35 - 0.42

Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483)

Volume resistivity: 10¹⁵ Ohm x cm (DIN 53482)

Surface resistance: approx. 10¹⁴ Ohm (DIN 53482)

Comparative tracking index (CTI): >600 V (IEC 112)

Dielectric strength: approx. 40 kV/mm (DIN 53481)

Water absorption (saturation): approx. 8.5 % (DIN 53495)

Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

Item	External thread	Gewindelänge mm	Einheit Stück	Price Euro*
333107	M5 x 0,8	6	25	34.00
333108	M5 x 0,8	6	50	57.00
305574	M5 x 0,8	10	25	34.00
305575	M5 x 0,8	10	50	57.00
305576	M5 x 0,8	16	25	34.00
305577	M5 x 0,8	16	50	57.00
305578	M5 x 0,8	20	25	45.00
305579	M5 x 0,8	20	50	78.00
305580	M5 x 0,8	25	25	45.00
305581	M5 x 0,8	25	50	78.00
305582	M5 x 0,8	30	25	45.00
305583	M5 x 0,8	30	50	78.00
333109	M6 x 1	6	50	54.00
333110	M6 x 1	6	100	93.00
333111	M6 x 1	8	50	54.00
333112	M6 x 1	8	100	93.00
305584	M6 x 1	10	50	54.00
305585	M6 x 1	10	100	93.00
333113	M6 x 1	12	50	54.00
333114	M6 x 1	12	100	93.00
305586	M6 x 1	16	50	54.00
305587	M6 x 1	16	100	93.00
305588	M6 x 1	20	25	36.00
305589	M6 x 1	20	50	59.00
305590	M6 x 1	25	25	36.00
305591	M6 x 1	25	50	59.00
305592	M6 x 1	30	25	36.00
305593	M6 x 1	30	50	59.00
333115	M6 x 1	35	25	36.00
333116	M6 x 1	35	50	59.00
333117	M6 x 1	40	25	40.00
333118	M6 x 1	40	50	67.00
333119	M6 x 1	45	25	40.00
333120	M6 x 1	45	50	67.00
333121	M6 x 1	50	25	40.00
333122	M6 x 1	50	50	67.00
333123	M6 x 1	60	25	40.00
333124	M6 x 1	60	50	67.00
333125	M6 x 1	70	25	59.00
333126	M6 x 1	70	50	98.00
333127	M6 x 1	80	25	59.00
333128	M6 x 1	80	50	98.00
333129	M8 x 1,25	6	25	53.00
333130	M8 x 1,25	6	50	89.00
333131	M8 x 1,25	8	25	53.00
333132	M8 x 1,25	8	50	89.00
333133	M8 x 1,25	10	25	53.00
333134	M8 x 1,25	10	50	89.00
333135	M8 x 1,25	12	25	53.00
333136	M8 x 1,25	12	50	89.00
333137	M8 x 1,25	16	25	61.00
333138	M8 x 1,25	16	50	103.00
333139	M8 x 1,25	20	25	61.00
333140	M8 x 1,25	20	50	103.00
333141	M8 x 1,25	25	25	61.00
333142	M8 x 1,25	25	50	103.00
333143	M8 x 1,25	30	25	61.00
333144	M8 x 1,25	30	50	103.00
333145	M8 x 1,25	35	25	64.00
333146	M8 x 1,25	35	50	106.00
333147	M8 x 1,25	40	25	64.00
333148	M8 x 1,25	40	50	106.00
333149	M8 x 1,25	45	25	64.00
333150	M8 x 1,25	45	50	106.00
333151	M8 x 1,25	50	20	55.00
333152	M8 x 1,25	50	40	90.00
333153	M8 x 1,25	60	20	55.00
333154	M8 x 1,25	60	40	90.00
333155	M8 x 1,25	70	10	36.00
333156	M8 x 1,25	70	20	70.00
333157	M8 x 1,25	80	10	36.00
333158	M8 x 1,25	80	20	70.00
333159	M10 x 1,5	6	20	60.00
333160	M10 x 1,5	6	40	99.00
333161	M10 x 1,5	8	20	60.00
333162	M10 x 1,5	8	40	99.00
333163	M10 x 1,5	10	20	60.00
333164	M10 x 1,5	10	40	99.00
333165	M10 x 1,5	12	20	60.00
333166	M10 x 1,5	12	40	99.00
333167	M10 x 1,5	16	20	60.00
333168	M10 x 1,5	16	40	99.00
333169	M10 x 1,5	20	20	60.00
333170	M10 x 1,5	20	40	99.00
333171	M10 x 1,5	25	10	35.00
333172	M10 x 1,5	25	20	56.00
333173	M10 x 1,5	30	10	35.00
333174	M10 x 1,5	30	20	56.00
333175	M10 x 1,5	35	10	35.00
333176	M10 x 1,5	35	20	56.00
333177	M10 x 1,5	40	10	35.00
333178	M10 x 1,5	40	20	56.00
333179	M10 x 1,5	45	10	35.00
333180	M10 x 1,5	45	20	56.00
333181	M10 x 1,5	50	10	47.00
333182	M10 x 1,5	50	20	76.00
333183	M10 x 1,5	60	10	47.00
333184	M10 x 1,5	60	20	76.00
333185	M10 x 1,5	70	10	47.00
333186	M10 x 1,5	70	20	76.00
333187	M10 x 1,5	80	10	47.00
333188	M10 x 1,5	80	20	76.00