A low viscosity, one part adhesive based on cyanoacrylate with a good bonding on a wide range of materials including plastics, metals and elastomers.
Cyanolit® 241 F cures rapidly with atmospheric moisture. Low viscosity makes it ideal for applications where wicking of the adhesive into pre-assembled parts is required.
Cyanolit® 241 F has met the requirements for USP Class VI and is suitable for use in the assembly of disposable medical devices.
Curing takes place without heat supply, pressure or additional activators. The curing speed depends on the gap width and the humidity level. A small gap width and a high humidity accelerate the setting process.
After a short time Cyanolit® 241 F reaches high strength. The material continues to harden 24 hours after gluing. Only after this time is the optimum media resistance achieved.
Gap width: max. 0.15 mm
Temperature resistance: -80 to +80 °C (cured material)
Viscosity: 30 - 50 mPas (uncured material)
Density: 1.1 g/cm3 (PE-Norm 004, uncured material)
Flash point: > +83 °C (uncured material)
PVC: 5 sec.
PMMA: 10 sec.
ABS: 15 sec.
PC: 20 sec.
NR: 5 sec.
Steel: 10 sec.
Storage: 6 months at +20 °C, max. 9 months at 0 to +10 °C