window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); T-Shaped Pipe Connector with Female Thread made of PP, PVDF or PTFE | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

T-Shaped Pipe Connector with Female Thread made of PP, PVDF or PTFE

Product specification T-shape, pipe connection on two sides; female G- or M-thread on the... more

Product specification

T-shape, pipe connection on two sides; female G- or M-thread on the third side

General Information EMP-4 THOMAFLUID ® -pipe screw fittings are used for connecting pipes... more

General Information EMP-4

THOMAFLUID®-pipe screw fittings are used for connecting pipes made of various materials such as metal, glass or plastic e.g. PA, PTFE or PVDF. This represents a considerable advantage of this kind of screwed fittings. The screw fitting is not limited to use with rigid pipes but also with flexible pipes or tubing. In this case, carrying brackets (items 22036-54) are required.

THOMAFLUID®-pipe screw fittings of the MULTIFIT®-EMP-series can be screwed into THOMAFLUID®-valves, cocks, and flowmeters of the MULTIFIT®-EMP-series.

Assembly:

The connection principle entails pushing the pipe against the inner edge of the connector and sealing with a sealing ring. The pipe is secured in place by a cutting ring (PEEK), which is forced against the pipe by a nut. The more the nut is screwed onto the connector body, the more the slotted cutting ring wedges the pipe. The result is a tight, friction-locked connection, which can be released at any time. The design concept eliminates the dead volume. It also has no effect on the flow because the inside diameter is identical to that of the pipe.

If flexible tubing has have to be adapted using THOMAFLUID®-pipe screw fittings, first the carrying brackets have to be put in the flexible tubes. Afterwards, the fixed assembly is done by tightening the cap nut.

PP (Polypropylene)

Extremely good impact toughness and notch impact strength

Higher hardness and stiffness as well as better resilience than PE

Thermoforming possible

Very good dielectrical properties

Good resistance to alcohols, ketones, conc. acids and alkalis

Not stable to aromatic hydrocarbons, fats and oils, halogenes

Autoclavable

Resistant to hydrolysis

Physiologically safe

Regulatory compliance to FDA 21 CFR 177.1520, RoHS, BPA-free, DEHP-free, BSE/ADI-free

Colour: grey

Density: 0.90 g/cm3

Temperature range: +5 to +90 °C

Shore hardness D: 72°

Max. operating pressure: 10 bar at +20 °C

Water absorption: <0.05 %

Tensile strength: 25 - 40 N/mm2

Elongation at break: 800 %

Surface resistance: >1013 Ohm

Melt flow index MFR: 0.3 g/10 min.

PVDF (Polyvinylidene fluoride)

High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.

High impact toughness even at low temperatures

Good breakdown strength

Low dielectric loss factor

Highest mechanical stability and stiffness

Meeting highest purity requirements

Comply with the guidelines from FDA and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.

Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualities

Outstanding resistance to UV, weather and aging

Flame-resistant

High thermal stability

Resistant to alcohols, fats and oils, halogenes, alkalis, acids

Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid

Colour: nature, slightly translucent

Density: 1.75 g/cm3

Temperature range: -40 to +140 °C

Shore hardness D: 79°

Max. operating pressure: 10 bar at +20 °C

Water absorption: <0.04 %

Tensile strength: 38 - 50 N/mm2

Surface resistance: >1013 Ohm

Melt flow index MFR: 6 g/10 min.

PTFE (Polytetrafluoroethylene)

Heavy-duty plastic

Antiadhesive surface

Outstanding sliding properties

Lowest friction coefficient of all fluorinated plastics

Excellent stress cracking resistance

Excellent weather resistance

Highest gas-tightness

No water absorption

Very good dielectric properties independent of frequency and temperature

Very good electrical insulating capacity also at air humidity

High tracking resistance

Non-combustible

Colour: milky, white

Density: 2.20 g/cm3

Temperature range: -200 to +150 °C

Shore hardness D: 60°

Max. operating pressure: 6 bar at +20 °C

Tearing strength: 30 - 40 N/mm2

Elongation at break: 300 %

Water absorption: 0.01 %

Surface resistance: >1017 Ohm

Item Image Pipe outside Ø
mm
Innengewinde D
mm
l1
mm
L1
mm
Werkstoff Einheit
Stück
Price
Euro*
Buy
10734
4 G 1/8" 15 12 48 PP 10 182.00
10736
4 G 1/8" 15 12 48 PVDF 5 150.00
10737
4 G 1/4" 20 15 54 PP 10 182.00
10739
4 G 1/4" 20 15 54 PVDF 5 150.00
10740
4 G 3/8" 25 15 60 PP 10 214.00
10742
4 G 3/8" 25 15 60 PVDF 3 135.00
10743
4 G 1/2" 30 16 64 PP 10 225.00
10745
4 G 1/2" 30 16 64 PVDF 2 103.00
23259
6 G 1/8" 15 12 48 PP 10 182.00
23261
6 G 1/8" 15 12 48 PVDF 5 150.00
23263
6 G 1/4" 20 15 54 PP 10 182.00
23265
6 G 1/4" 20 15 54 PVDF 5 146.00
23267
6 G 3/8" 25 15 64 PP 10 214.00
23269
6 G 3/8" 25 15 64 PVDF 3 135.00
23271
6 G 1/2" 30 16 64 PP 10 225.00
23273
6 G 1/2" 30 16 64 PVDF 2 103.00
23275
8 G 1/8" 15 12 48 PP 5 124.00
23277
8 G 1/8" 15 12 48 PVDF 5 161.00
23279
8 G 1/4" 20 15 54 PP 5 128.00
23281
8 G 1/4" 20 15 54 PVDF 5 172.00
23283
8 G 3/8" 25 15 60 PP 5 129.00
23285
8 G 3/8" 25 15 60 PVDF 2 110.00
23287
8 G 1/2" 30 16 64 PP 5 140.00
23289
8 G 1/2" 30 16 64 PVDF 2 125.00
23291
10 G 1/8" 20 12 56 PP 5 177.00
23293
10 G 1/8" 20 12 56 PVDF 5 193.00
23295
10 G 1/4" 20 15 56 PP 5 174.00
23296
10 G 1/4" 20 15 56 PTFE 5 219.00
23297
10 G 1/4" 20 15 56 PVDF 5 188.00
23299
10 G 3/8" 25 15 62 PP 5 188.00
23301
10 G 3/8" 25 15 62 PVDF 2 125.00
23303
10 G 1/2" 30 16 66 PP 5 140.00
23305
10 G 1/2" 30 16 66 PVDF 2 146.00
23307
12 G 1/8" 20 12 58 PP 5 193.00
23309
12 G 1/8" 20 12 58 PVDF 2 129.00
23311
12 G 1/4" 20 15 58 PP 5 198.00
23313
12 G 1/4" 20 15 58 PVDF 2 129.00
23315
12 G 3/8" 25 15 64 PP 5 200.00
23317
12 G 3/8" 25 15 64 PVDF 2 131.00
23319
12 G 1/2" 30 16 68 PP 5 216.00
23321
12 G 1/2" 30 16 68 PVDF 2 163.00
23323
14 G 1/8" 25 12 64 PP 5 209.00
23325
14 G 1/8" 25 12 64 PVDF 2 155.00
23327
14 G 1/4" 25 15 64 PP 5 214.00
23329
14 G 1/4" 25 15 64 PVDF 2 155.00
23331
14 G 3/8" 25 15 64 PP 5 220.00
23333
14 G 3/8" 25 15 64 PVDF 1 93.00
23335
14 G 1/2" 30 16 68 PP 2 95.00
23337
14 G 1/2" 30 16 68 PVDF 1 102.00
23339
6 M10 x 1,5 15 48 PP 10 a.A.
23341
6 M10 x 1,5 15 48 PVDF 5 a.A.
23343
6 M12 x 1,5 20 54 PP 10 a.A.
23345
6 M12 x 1,5 20 54 PVDF 5 a.A.
23347
6 M16 x 1,5 25 64 PP 5 a.A.
23349
6 M16 x 1,5 25 64 PVDF 3 a.A.
23351
6 M18 x 1,5 25 64 PP 5 a.A.
23353
6 M18 x 1,5 25 64 PVDF 2 a.A.
23355
8 M10 x 1,5 15 48 PP 10 a.A.
23357
8 M10 x 1,5 15 48 PVDF 5 a.A.
23359
8 M12 x 1,5 20 54 PP 10 a.A.
23361
8 M12 x 1,5 20 54 PVDF 5 a.A.
23363
8 M16 x 1,5 25 60 PP 5 a.A.
23365
8 M16 x 1,5 25 60 PVDF 3 a.A.
23367
8 M18 x 1,5 25 60 PP 5 a.A.
23369
8 M18 x 1,5 25 60 PVDF 2 a.A.
23371
10 M10 x 1,5 20 56 PP 5 a.A.
23373
10 M10 x 1,5 20 56 PVDF 2 a.A.
23375
10 M12 x 1,5 20 56 PP 5 a.A.
23377
10 M12 x 1,5 20 56 PVDF 2 a.A.
23379
10 M16 x 1,5 25 62 PP 5 a.A.
23381
10 M16 x 1,5 25 62 PVDF 2 a.A.
23383
10 M18 x 1,5 25 62 PP 5 a.A.
23385
10 M18 x 1,5 25 62 PVDF 2 a.A.
23387
12 M12 x 1,5 20 58 PP 5 a.A.
23389
12 M12 x 1,5 20 58 PVDF 2 a.A.
23391
12 M14 x 1,5 20 58 PP 5 a.A.
23393
12 M14 x 1,5 20 58 PVDF 2 a.A.
23395
12 M16 x 1,5 25 64 PP 5 a.A.
23397
12 M16 x 1,5 25 64 PVDF 2 a.A.
23399
12 M18 x 1,5 25 64 PP 3 a.A.
23401
12 M18 x 1,5 25 64 PVDF 2 a.A.
23403
14 M12 x 1,5 25 64 PP 3 a.A.
23405
14 M12 x 1,5 25 64 PVDF 2 a.A.
23407
14 M14 x 1,5 25 64 PP 3 a.A.
23409
14 M14 x 1,5 25 64 PVDF 2 a.A.
23411
14 M16 x 1,5 25 64 PP 3 a.A.
23413
14 M16 x 1,5 25 64 PVDF 2 a.A.
23415
14 M18 x 1,5 25 64 PP 3 a.A.
23417
14 M18 x 1,5 25 64 PVDF 2 a.A.
Accessories
Similar products
Viewed