Flowmeter made of PA 6 - Scale: 170/200 mm

Flowmeter made of PA 6 - Scale: 170/200 mm

Product specification Practical graduated measuring ranges according to DIN Increased... more

Close menu

Product specification

Practical graduated measuring ranges according to DIN

Increased accuracy due to optimized graduated tube geometry

Good temperature resistance

High creep strength

High impact toughness

High wear resistance

Hermetically sealed, connected with O-rings

Require little maintenance

Encapsulated magnet impervious to fluids with only one polarization for monostable and bistable function.

Technical specification

Material:

Measuring tube: PA 6 (polyamide 6T, TROGAMID^®), transparent

Float: PVDF (polyvinylidene fluoride); stainless steel 1.4301 (V2A); PVDF, with encapsulated magnet impervious to fluids

O-rings: EPDM (ethylene-propylene-diene-monomer); FPM (fluorinated rubber) on request

Union socket ends: PVC-U (rigid polyvinyl chloride), grey (RAL 7011)

Measuring range: 5 - 1,500 l/h

Indicator accuracy: according to VDI / VDE 3513, Part 2

Pressure stage: PN 10 at +20 °C

Media handled: technical clean, neutral liquids and gases

Media temperature: +75 °C

Pipe connection: PVC-U socket ends for solvent welding according to DIN 8063; threaded connection

Installation: vertical; flow direction from the bottom to the top

General Information Flowmeter of high measurement accuracy and operational reliability for... more

Close menu

General Information

Flowmeter of high measurement accuracy and operational reliability for use in laboratory, pilot and production plants. It meets the high requirements of process engineering and is usable in process automation due to limit signal transmitters and measured value remote transmission.

Transparent measuring body made of PVC-U or PA, available in three installation lengths. The medium flows vertically from the bottom to the top. The flow forces cause the float to lift without friction and its top graduation edge indicates directly the flow volume on the graduated tube scale. The optimized stabilization of the float makes reading easier. The measuring range scale on the conical graduated tube indicates as standard l/h for water at +20 °C. The graduated tube is equipped with external dovetailed strips with two movable set-point indicators for the optimum marking of minimum and maximum flow volume or for acommodating limit signal transmitters. The float of PVDF as standard as well as the float trap are located in the measuring tube.

For automatic measurement, the float is equipped with a magnet insert which is impervious to fluids. The connections (socket ends for solvent) with two O-rings ensure a reliable sealing and fast, unproblematic radial installation.

Item	d mm	NW mm	DIN 8063 screw connection	Messbereich Flüssigkeiten l/h	Werkstoff Schwebekörper	L mm	Einheit Stück	Price Euro*
350747	20	15	G 1"	5 - 50	PVDF	170	1	230.00
350748	20	15	G 1"	15 - 150	PVDF	170	1	230.00
350749	20	15	G 1"	25 - 250	PVDF	170	1	230.00
350750	20	15	G 1"	40 - 400	PVDF	170	1	230.00
350751	20	15	G 1"	5 - 50	PVDF-M	170	1	317.00
350752	20	15	G 1"	15 - 150	PVDF-M	170	1	317.00
350753	20	15	G 1"	25 - 250	PVDF-M	170	1	317.00
350754	20	15	G 1"	40 - 400	PVDF-M	170	1	317.00
350755	32	25	G 1 1/2"	25 - 250	PVDF	200	1	253.00
350756	32	25	G 1 1/2"	40 - 400	PVDF	200	1	253.00
350757	32	25	G 1 1/2"	100 - 1000	PVDF	200	1	253.00
350758	32	25	G 1 1/2"	150 - 1500	PVDF	200	1	253.00
350763	32	25	G 1 1/2"	25 - 250	PVDF-M	200	1	348.00
350764	32	25	G 1 1/2"	40 - 400	PVDF-M	200	1	348.00
350765	32	25	G 1 1/2"	100 - 1000	PVDF-M	200	1	348.00
350766	32	25	G 1 1/2"	150 - 1500	PVDF-M	200	1	348.00