window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Slotted Raised Countersunk Head Screw (DIN 964) made of PP | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Slotted Raised Countersunk Head Screw (DIN 964) made of PP

Technical specification Material: PP (polypropylene) Colour: natural... more

Technical specification

Material: PP (polypropylene)

Colour: natural

Regulations: DIN 964, ISO 2010

General Information Resistant to corrosion, abrasion and to most chemicals Extremely good... more

General Information

Resistant to corrosion, abrasion and to most chemicals

Extremely good impact toughness and notch impact strength

High surface hardness

Resistant to hydrolysis

Insulating against moisture and electricity

This material should not be used at freezing temperatures, because of embrittlement at temperatures below 0 °C

Chemical features:

Good resistance to alcohols, ketones, alkalis and acids (except strong and oxidizing acids); resistant to fats and oils, including mineral oils and fuels.

Material specification:

PP is a universally usable standard plastic with excellent properties

PP is sterilizable and has good electrical properties

Weldable; bondable only after pretreatment

PP is similar to PE (polyethylene), but more fat- and oil-resistant, and also features a higher hardness and stiffness than HDPE as well as a better resilience; its impact strength is, however, lower

UV radiation and weather: limited resistance

Material: PP (polypropylene)

Colour: natural

Density: 0.90 g/cm3 (DIN 53479)

Temperature range: 0 to +100 °C

Elastic modulus: 1,350 N/mm2 (ISO 527)

Yield stress: 30 N/mm2 (ISO 527-1)

Tearing strength: 25 - 40 N/mm2 (DIN 53455)

Elongation at break: 70 % (DIN 53455)

Impact resistance: without break (DIN 53453)

Notch impact strength: 7 kJ/m2 (DIN 53453)

Ball pressure hardness: 70 N/mm2 (DIN 53456)

Coefficient of sliding friction against steel (dry): approx. 0.30 - 0.40

Thermal conductivity: 0.22 W/m * K (DIN 52612)

Shore hardness D: 70° (DIN 53505)

Volume resistivity: 1017 Ohm x cm (DIN 53482)

Surface resistance: 1013 Ohm (DIN 53482)

Dielectric constant: 2.27 at 50 Hz (DIN 53483)

Item Image External thread Thread length
mm
D
mm
h1
mm
h2
mm
Unit
piece
Price
Euro*
Buy
336321
M5 x 0,8 8 9 2,5 1,25 50 56.00
336322
M5 x 0,8 8 9 2,5 1,25 100 96.00
3363231
M5 x 0,8 10 9 2,5 1,25 50 56.00
3363241
M5 x 0,8 10 9 2,5 1,25 100 96.00
336325
M5 x 0,8 15 9 2,5 1,25 50 56.00
336326
M5 x 0,8 15 9 2,5 1,25 100 96.00
336327
M5 x 0,8 17 9 2,5 1,25 50 56.00
336328
M5 x 0,8 17 9 2,5 1,25 100 96.00
3363291
M5 x 0,8 20 9 2,5 1,25 50 56.00
3363301
M5 x 0,8 20 9 2,5 1,25 100 96.00
336331
M5 x 0,8 25 9 2,5 1,25 50 60.00
336332
M5 x 0,8 25 9 2,5 1,25 100 102.00
336333
M5 x 0,8 30 9 2,5 1,25 50 60.00
336334
M5 x 0,8 30 9 2,5 1,25 100 102.00
336335
M5 x 0,8 40 9 2,5 1,25 50 60.00
336336
M5 x 0,8 40 9 2,5 1,25 100 102.00
336337
M5 x 0,8 50 9 2,5 1,25 50 62.00
336338
M5 x 0,8 50 9 2,5 1,25 100 108.00
336339
M6 x 1 8 11 3 1,5 50 62.00
336340
M6 x 1 8 11 3 1,5 100 108.00
3363411
M6 x 1 12 11 3 1,5 50 62.00
3363421
M6 x 1 12 11 3 1,5 100 108.00
336343
M6 x 1 17 11 3 1,5 50 62.00
336344
M6 x 1 17 11 3 1,5 100 108.00
3363451
M6 x 1 20 11 3 1,5 50 62.00
3363461
M6 x 1 20 11 3 1,5 100 108.00
336347
M6 x 1 25 11 3 1,5 50 62.00
336348
M6 x 1 25 11 3 1,5 100 108.00
336349
M6 x 1 30 11 3 1,5 50 62.00
336350
M6 x 1 30 11 3 1,5 100 108.00
336351
M6 x 1 40 11 3 1,5 50 68.00
336352
M6 x 1 40 11 3 1,5 100 116.00
336353
M6 x 1 50 11 3 1,5 50 68.00
336354
M6 x 1 50 11 3 1,5 100 116.00
3363551
M8 x 1,25 20 14,5 4 2 50 76.00
3363561
M8 x 1,25 20 14,5 4 2 100 134.00
336357
M8 x 1,25 25 14,5 4 2 50 76.00
336358
M8 x 1,25 25 14,5 4 2 100 134.00
336359
M8 x 1,25 30 14,5 4 2 50 84.00
336360
M8 x 1,25 30 14,5 4 2 100 146.00
336361
M8 x 1,25 40 14,5 4 2 50 84.00
336362
M8 x 1,25 40 14,5 4 2 100 146.00
336363
M8 x 1,25 50 14,5 4 2 50 84.00
336364
M8 x 1,25 50 14,5 4 2 100 146.00
Similar products
Viewed