Insulation Hoses as Heat Shrink Tubes Made of PTFE, PTFE/FEP, FEP, PVDF, Polyolefin
Insulation hoses as heat shrink tubes are used for cable and wire bend protection, as well as for protection against environmental influences and corrosion. They serve to insulate cables as well as bundle them; insulation hoses as shrink tubes are made from fluoroplastics such as PTFE, FEP, and PVDF, as well as from the soft plastic Polyolefin. The insulation hoses as shrink tubes are offered in different ratios, which depend on the specific application requirements.
The Range of Insulation Hoses as Heat Shrink Tubes Is as Follows:
Polyolefin
Polyolefin shrink tube sets 1000 are part of the insulation hoses as shrink tubes. They are offered as a practical set, with tube sections in inch-sized inner diameters; the sections are each 500 mm long and come in inner diameters of 2.4 mm, 3.2 mm, and 4.8 mm. The temperature is <125 °C bis +200 °C and the length shrinkage is a maximum of 10%; the dielectric strength is specified as 20 kV/mm.
Polyolefin shrink tube sets 2000 belong to the insulation hoses as shrink tubes group; they are available as a set and come in section lengths of 40 mm and 250 mm. The insulation hoses as shrink tubes are available in inner diameters of 1.2 mm, 1.6 mm, 2.4 mm, 3.2 mm, 4.8 mm, and 6.4 mm. The shrink temperature ranges from +125 °C to +200 °C, with an operating temperature range of -55 °C to +125 °C. Maximum length shrinkage is 10%, and radial shrinkage is 50%; the insulation hoses as shrink tubes are equipped with a dielectric strength of 20 kV/mm.
Polyolefin shrink tubes, shrink ratio 2:1 - flame-retardant - belong to the group of insulation hoses as shrink tubes for cable and wire bend protection, also used for protection against environmental influences like corrosion. They also serve to insulate cable bundles and for cable bundling. These tubes are made of cross-linked, flexible polyolefin; the shrink temperature is +90 °C, with an operating temperature range of -55 °C to +105 °C; the dielectric strength is
Polyolefin shrink tubes, shrink ratio 3:1 - self-extinguishing with self-adhesive coating, belong to the group of insulation hoses as shrink tubes; they are used for bend protection of cables and wires. These insulation hoses as shrink tubes are also used for corrosion protection and protection against environmental influences. They are characterized by high cold flexibility (4 hours at -45 °C) without any material fatigue; the temperature range is -55 °C to +110 °C, with a shrink temperature of +110 °C; tear elongation is <250%, and the dielectric strength is <11.8 kV/mm.
PTFE Heat Shrink Tubes
PTFE shrink tubes 2:1 - short lengths - are insulation hoses as shrink tubes used for insulating electrical components and wires, as well as for corrosion protection. The insulation hoses as shrink tubes are ideally suited for encapsulating movable and mechanical parts. They are characterized by excellent dielectric strength and high chemical resistance. They are thin-walled, semi-rigid, and transparent. The operating temperature range is -65 °C to +260 °C, with a temperature range of +330 °C to +350 °C. Length reduction is a maximum of 10%, and dielectric strength is 25 kV/mm/min, with a specific resistance of 1018 Ohm x cm/min.
PTFE shrink tubes 4:1 - bulk goods - are insulation hoses as shrink tubes used for insulating electrical components. They serve as ideal corrosion protection for encapsulating movable and mechanical parts. The tubes are non-melting and self-extinguishing, with extremely high chemical resistance. They are semi-rigid and transparent, with an operating temperature range of -65 °C to +260 °C, and a melting temperature range of +300 °C to +350 °C. The shrink length is a maximum of 10%, and the dielectric strength is 25 kV/mm/min.
PTFE shrink tube sets are equipped with insulation hoses, which are shrink tubes; they are used for insulating electrical components for corrosion protection. The insulation hoses as shrink tubes serve to encapsulate movable and mechanical components. They are thin-walled, abrasion-resistant, and transparent. The operating temperature range is -65 °C to +260 °C, with a shrink ratio of 4:1. The shrink temperature is between +350 °C and +500 °C, with a maximum length shrinkage of 15%. The dielectric strength is 1018 Ohm x cm/min.
PTFE shrink tubes - semi-rigid - belong to the group of insulation hoses as shrink tubes; they serve for electrical insulation and as protection against environmental influences. The operating temperature range is -55 °C to +175 °C, and the shrink temperature is defined at +150 °C. The tear elongation is a minimum of 300%, and the dielectric strength is 1013 Ohm x cm/min.
PTFE shrink tubes - semi-rigid - belong to the group of insulation hoses as shrink tubes used for insulation of heating elements and their fittings. They are also used for protection of solder and crimp connections. The insulation hoses as PVDF shrink tubes are highly resistant to inorganic and organic media, especially resistant to galvanic baths. Their dielectric strength is high. The shrink ratio is 2:1, with an operating temperature range of -55 °C to +175 °C. Shrinking occurs at +175 °C.
PVDF Insulation Heat Shrink Tubes
PVDF shrink tube set semi-rigid includes insulation hoses made of shrink tubes; they are used for insulating electrical components but also for protection and strain relief of high-temperature resistant components. Their chemical resistance is remarkable, especially against galvanic baths. The operating temperature is -55 °C to +175 °C, with a shrink ratio of 2:1. Shrinkage occurs at +175 °C with a maximum length shrinkage of 10%. Tear elongation is defined as <150%, and the specific dielectric strength is 1013 Ohm x cm/min.
Order Insulation Shrink Tubes from Reichelt Chemietechnik
The complete range of insulation hoses is in stock at RCT, so we are happy to deliver small quantities on short notice. As always, we offer fair prices without minimum order surcharges. If you have any questions about our range, feel free to contact our team.
Insulation Hoses as Heat Shrink Tubes Made of PTFE, PTFE/FEP, FEP, PVDF, Polyolefin
Insulation hoses as heat shrink tubes are used for cable and wire bend protection, as well as for...
read more »
Close window
Insulation Hoses as Heat Shrink Tubes Made of PTFE, PTFE/FEP, FEP, PVDF, Polyolefin
Insulation hoses as heat shrink tubes are used for cable and wire bend protection, as well as for protection against environmental influences and corrosion. They serve to insulate cables as well as bundle them; insulation hoses as shrink tubes are made from fluoroplastics such as PTFE, FEP, and PVDF, as well as from the soft plastic Polyolefin. The insulation hoses as shrink tubes are offered in different ratios, which depend on the specific application requirements.
The Range of Insulation Hoses as Heat Shrink Tubes Is as Follows:
Polyolefin
Polyolefin shrink tube sets 1000 are part of the insulation hoses as shrink tubes. They are offered as a practical set, with tube sections in inch-sized inner diameters; the sections are each 500 mm long and come in inner diameters of 2.4 mm, 3.2 mm, and 4.8 mm. The temperature is <125 °C bis +200 °C and the length shrinkage is a maximum of 10%; the dielectric strength is specified as 20 kV/mm.
Polyolefin shrink tube sets 2000 belong to the insulation hoses as shrink tubes group; they are available as a set and come in section lengths of 40 mm and 250 mm. The insulation hoses as shrink tubes are available in inner diameters of 1.2 mm, 1.6 mm, 2.4 mm, 3.2 mm, 4.8 mm, and 6.4 mm. The shrink temperature ranges from +125 °C to +200 °C, with an operating temperature range of -55 °C to +125 °C. Maximum length shrinkage is 10%, and radial shrinkage is 50%; the insulation hoses as shrink tubes are equipped with a dielectric strength of 20 kV/mm.
Polyolefin shrink tubes, shrink ratio 2:1 - flame-retardant - belong to the group of insulation hoses as shrink tubes for cable and wire bend protection, also used for protection against environmental influences like corrosion. They also serve to insulate cable bundles and for cable bundling. These tubes are made of cross-linked, flexible polyolefin; the shrink temperature is +90 °C, with an operating temperature range of -55 °C to +105 °C; the dielectric strength is
Polyolefin shrink tubes, shrink ratio 3:1 - self-extinguishing with self-adhesive coating, belong to the group of insulation hoses as shrink tubes; they are used for bend protection of cables and wires. These insulation hoses as shrink tubes are also used for corrosion protection and protection against environmental influences. They are characterized by high cold flexibility (4 hours at -45 °C) without any material fatigue; the temperature range is -55 °C to +110 °C, with a shrink temperature of +110 °C; tear elongation is <250%, and the dielectric strength is <11.8 kV/mm.
PTFE Heat Shrink Tubes
PTFE shrink tubes 2:1 - short lengths - are insulation hoses as shrink tubes used for insulating electrical components and wires, as well as for corrosion protection. The insulation hoses as shrink tubes are ideally suited for encapsulating movable and mechanical parts. They are characterized by excellent dielectric strength and high chemical resistance. They are thin-walled, semi-rigid, and transparent. The operating temperature range is -65 °C to +260 °C, with a temperature range of +330 °C to +350 °C. Length reduction is a maximum of 10%, and dielectric strength is 25 kV/mm/min, with a specific resistance of 1018 Ohm x cm/min.
PTFE shrink tubes 4:1 - bulk goods - are insulation hoses as shrink tubes used for insulating electrical components. They serve as ideal corrosion protection for encapsulating movable and mechanical parts. The tubes are non-melting and self-extinguishing, with extremely high chemical resistance. They are semi-rigid and transparent, with an operating temperature range of -65 °C to +260 °C, and a melting temperature range of +300 °C to +350 °C. The shrink length is a maximum of 10%, and the dielectric strength is 25 kV/mm/min.
PTFE shrink tube sets are equipped with insulation hoses, which are shrink tubes; they are used for insulating electrical components for corrosion protection. The insulation hoses as shrink tubes serve to encapsulate movable and mechanical components. They are thin-walled, abrasion-resistant, and transparent. The operating temperature range is -65 °C to +260 °C, with a shrink ratio of 4:1. The shrink temperature is between +350 °C and +500 °C, with a maximum length shrinkage of 15%. The dielectric strength is 1018 Ohm x cm/min.
PTFE shrink tubes - semi-rigid - belong to the group of insulation hoses as shrink tubes; they serve for electrical insulation and as protection against environmental influences. The operating temperature range is -55 °C to +175 °C, and the shrink temperature is defined at +150 °C. The tear elongation is a minimum of 300%, and the dielectric strength is 1013 Ohm x cm/min.
PTFE shrink tubes - semi-rigid - belong to the group of insulation hoses as shrink tubes used for insulation of heating elements and their fittings. They are also used for protection of solder and crimp connections. The insulation hoses as PVDF shrink tubes are highly resistant to inorganic and organic media, especially resistant to galvanic baths. Their dielectric strength is high. The shrink ratio is 2:1, with an operating temperature range of -55 °C to +175 °C. Shrinking occurs at +175 °C.
PVDF Insulation Heat Shrink Tubes
PVDF shrink tube set semi-rigid includes insulation hoses made of shrink tubes; they are used for insulating electrical components but also for protection and strain relief of high-temperature resistant components. Their chemical resistance is remarkable, especially against galvanic baths. The operating temperature is -55 °C to +175 °C, with a shrink ratio of 2:1. Shrinkage occurs at +175 °C with a maximum length shrinkage of 10%. Tear elongation is defined as <150%, and the specific dielectric strength is 1013 Ohm x cm/min.
Order Insulation Shrink Tubes from Reichelt Chemietechnik
The complete range of insulation hoses is in stock at RCT, so we are happy to deliver small quantities on short notice. As always, we offer fair prices without minimum order surcharges. If you have any questions about our range, feel free to contact our team.
