POM Full Plastic Quick-Disconnect Nipple, NW 6.4 mm

POM Full Plastic Quick-Disconnect Nipple, NW 6.4 mm

Product specification Male full plastic coupling part. With shut-off and hose nozzle or... more

Close menu

Product specification

Male full plastic coupling part. With shut-off and hose nozzle or external thread for piping connection. Can be combined with all female coupling parts of the series 16204-16207.

General Information Quick-Disconnect Coupling THOMAFLUID ® -quick-disconnect coupling... more

Close menu

General Information Quick-Disconnect Coupling

THOMAFLUID^®-quick-disconnect coupling systems are excellently suited for connecting and disconnecting of tubes, apparatuses etc. The quick-disconnect couplings are easy to operate, connecting and disconnecting can be done by one hand. The coupling is self-locking when the nipple is plugged-in. For disconnection a short thumb pressure on the lock is sufficient to pull out the nipple easily. All nipples are fitted with an easily interchangeable, reliably sealing O-ring.

A complete operable THOMAFLUID^®-quick-disconnect coupling system consists of a coupling part and a nipple part, both parts may be fitted with valves. A complete quick-disconnect coupling system locking at one side consists of a coupling part with shut-off and a nipple part with port, or a coupling part with port and a nipple part with shut-off. To get a coupling locking on both sides, a coupling part as well as a nipple part, both with shut-off, have to be obtained.

General Information POM

For compressed air, gases, liquids, and vacuum, floor cleaning equipment, filtration of deionized water, dispensing equipment, automated machines, compression therapy, leak detectors.

The coupling parts (couplings and nipples) are made of thermoplastic acetal in the injection-moulding process. They are robust and usable with the most mild chemicals.

Resistant to alcohol, aldehydes, petrol, ethers, esters, glykols and motor oils, within the pH range of 4 to 9 also to alkalis and acids.

General Information 6.4 mm nominal width

This series with a nominal diameter of 6.4 mm has a plastic release button, a smaller number of moving parts and a design with smooth contours. Therefore, it is easy to use and provides excellent flow in a compact size.

Diverse areas of application such as in drinking water filtration, heat therapy, parts cleaning or dispensing systems.

The release button is again specially protected to prevent accidental disconnection..

Material:

Valve body: POM (polyacetal, polyoxymethylene)

Gaskets: NBR (butadiene-rubber)

Valve spring: stainless steel 316

Clip locking: POM (polyacetal, polyoxymethylene)

Colour: white

Nominal width: 6.4 mm

Plug diameter: approx. 11.2 mm

Temperature range: -40 to +82 °C

Max. operating pressure: 8.3 bar at +20 °C

Item	Image	Connection	Ventil	Länge mm	Ausführung	Einheit Stück	Price Euro*
16208	POM Full Plastic Quick-Disconnect Nipple, NW 6.4 mm	A-Gewinde NPT 1/4"	mit	45	gerade	2	17.00
16213	POM Full Plastic Quick-Disconnect Nipple, NW 6.4 mm	A-Gewinde NPT 3/8"	ohne	38	gerade	1	9.00
16214	POM Full Plastic Quick-Disconnect Nipple, NW 6.4 mm	A-Gewinde NPT 3/8"	mit	42	gerade	1	14.00
16209	POM Full Plastic Quick-Disconnect Nipple, NW 6.4 mm	Tülle 6,4 mm	mit	53	gerade	2	17.00
16210	POM Full Plastic Quick-Disconnect Nipple, NW 6.4 mm	Tülle 9,5 mm	mit	49	gerade	2	17.00
16211	POM Full Plastic Quick-Disconnect Nipple, NW 6.4 mm	Tülle 6,4 mm	mit	37	winkel	2	22.00
16212	POM Full Plastic Quick-Disconnect Nipple, NW 6.4 mm	Tülle 9,5 mm	mit	38	winkel	2	22.00