Unser Betrieb ist vom 21.12.2019 bis 06.01.2020 geschlossen. Der letzte Versandtag ist am 18.12.2019, der erste Versandtag im neuen Jahr ist am 08.01.2020. Denken Sie daran, zeitnah zu bestellen!

+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Micro T-Shaped Connector with Male Thread made of PVDF

Product specification Symmetrical T-shaped screw-in connector for tubings of rigid plastics... more

Product specification

Symmetrical T-shaped screw-in connector for tubings of rigid plastics or metal on fixed equipment. Fitted with G or NPT screw-in thread 1/8" or 1/4".

General Information A long sealing cone (ferrule) put at the end of the tubing is solidly... more

General Information

A long sealing cone (ferrule) put at the end of the tubing is solidly screwed into the conical fit of the connector by means of a knurled cap nut. The resistance to withdrawing forces is increased by the contact pressure on the tubing exerted by the cap nut on a FPM-O-ring via a pressure pad.

PVDF (Polyvinylidene fluoride)

High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.

High impact toughness even at low temperatures

Highest mechanical stability and stiffness

Good breakdown strength

Low dielectric loss factor

Physiologically safe

Meeting highest purity requirements

Outstanding resistance to UV, weather and aging

Flame-resistant

High thermal stability

Resistant to alcohols, fats and oils, halogenes, alkalis, acids

Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid

Colour: nature, slightly translucent

Density: 1.75 g/cm3

Temperature range: -40 to +140 °C

Shore hardness D: 79° (great hardness)

Max. operating pressure: 1 bar at +20 °C

Water absorption: <0.04 % (water resistant)

Tensile strength: 38 - 50 N/mm2

Elongation at break: 12 %

Surface resistance: >1013 Ohm

Melt flow index MFR: 6 g/10 min.

PTFE (Polytetrafluoroethylene)

Heavy-duty plastic

Antiadhesive surface

Outstanding sliding properties

Lowest friction coefficient of all fluorinated plastics

Excellent stress cracking resistance

Excellent weather resistance

Highest gas-tightness

No water absorption

Very good dielectric properties independent of frequency and temperature

Very good electrical insulating capacity also at air humidity

High tracking resistance

Non-combustible

Colour: milky, white

Density: 2.20 g/cm3

Temperature range: -200 to +150 °C

Shore hardness D: 60°

Max. operating pressure: 1 bar at +20 °C

Tearing strength: 30 - 40 N/mm2

Elongation at break: 300 %

Water absorption: 0.01 %

Surface resistance: >1017 Ohm

Zum anzeigen der Varianten bitte im Querformat benutzen.
Item Image Tubing outside Ø
mm
External thread l1
mm
L1
mm
L2
mm
Unit
piece
Price
Euro*
Buy
42757
0,7 G 1/8" 8 56 20 2 100.00
42758
0,7 G 1/4" 12 60 25 2 100.00
42759
1 G 1/8" 8 56 20 2 100.00
42760
1 G 1/4" 12 60 25 2 100.00
42761
1,5 G 1/8" 8 56 20 2 100.00
42762
1,5 G 1/4" 12 60 25 2 100.00
42763
1,6 G 1/8" 8 56 20 2 100.00
42764
1,6 G 1/4" 12 60 25 2 100.00
42765
1,8 G 1/8" 8 56 20 2 100.00
42766
1,8 G 1/4" 12 60 25 2 100.00
42767
2 G 1/8" 8 56 20 2 100.00
42768
2 G 1/4" 12 60 25 2 100.00
42769
2,5 G 1/8" 8 56 20 2 100.00
42770
2,5 G 1/4" 12 60 25 2 100.00
42771
2,8 G 1/8" 8 56 20 2 100.00
42772
2,8 G 1/4" 12 60 25 2 100.00
42773
3 G 1/8" 8 56 20 2 100.00
42774
3 G 1/4" 12 60 25 2 100.00
42775
3,1 G 1/8" 8 56 20 2 100.00
42776
3,1 G 1/4" 12 60 25 2 100.00
42777
3,2 G 1/8" 8 56 20 2 100.00
42778
3,2 G 1/4" 12 60 25 2 100.00
42779
3,5 G 1/8" 8 56 20 2 100.00
42780
3,5 G 1/4" 12 60 25 2 100.00
42781
3,6 G 1/8" 8 56 20 2 100.00
42782
3,6 G 1/4" 12 60 25 2 100.00
42783
4 G 1/8" 8 56 20 2 100.00
42784
4 G 1/4" 12 60 25 2 100.00
42785
4,3 G 1/8" 8 56 20 2 100.00
42786
4,3 G 1/4" 12 60 25 2 100.00
42787
4,5 G 1/8" 8 56 20 2 100.00
42788
4,5 G 1/4" 12 60 25 2 100.00
42789
4,8 G 1/8" 8 56 20 2 100.00
42790
4,8 G 1/4" 12 60 25 2 100.00
42791
5 G 1/8" 8 56 20 2 100.00
42792
5 G 1/4" 12 60 25 2 100.00
42793
5,1 G 1/8" 8 56 20 2 100.00
42794
5,1 G 1/4" 12 60 25 2 100.00
42795
5,5 G 1/8" 8 56 20 2 100.00
42796
5,5 G 1/4" 12 60 25 2 100.00
42797
6 G 1/8" 8 56 20 2 100.00
42798
6 G 1/4" 12 60 25 2 100.00
42799
6,4 G 1/8" 8 56 20 2 100.00
42800
6,4 G 1/4" 12 60 25 2 100.00
42801
0,7 NPT 1/8" 10 56 22 2 100.00
42802
0,7 NPT 1/4" 15 60 28 2 100.00
42803
1 NPT 1/8" 10 56 22 2 100.00
42804
1 NPT 1/4" 15 60 28 2 100.00
42805
1,5 NPT 1/8" 10 56 22 2 100.00
42806
1,5 NPT 1/4" 15 60 28 2 100.00
42807
1,6 NPT 1/8" 10 56 22 2 100.00
42808
1,6 NPT 1/4" 15 60 28 2 100.00
42809
1,8 NPT 1/8" 10 56 22 2 100.00
42810
1,8 NPT 1/4" 15 60 28 2 100.00
42811
2 NPT 1/8" 10 56 22 2 100.00
42812
2 NPT 1/4" 15 60 28 2 100.00
42813
2,5 NPT 1/8" 10 56 22 2 100.00
42814
2,5 NPT 1/4" 15 60 28 2 100.00
42815
2,8 NPT 1/8" 10 56 22 2 100.00
42816
2,8 NPT 1/4" 15 60 28 2 100.00
42817
3 NPT 1/8" 10 56 22 2 100.00
42818
3 NPT 1/4" 15 60 28 2 100.00
42819
3,1 NPT 1/8" 10 56 22 2 100.00
42820
3,1 NPT 1/4" 15 60 28 2 100.00
42821
3,2 NPT 1/8" 10 56 22 2 100.00
42822
3,2 NPT 1/4" 15 60 28 2 100.00
42823
3,5 NPT 1/8" 10 56 22 2 100.00
42824
3,5 NPT 1/4" 15 60 28 2 100.00
42825
3,6 NPT 1/8" 10 56 22 2 100.00
42826
3,6 NPT 1/4" 15 60 28 2 100.00
42827
4 NPT 1/8" 10 56 22 2 100.00
42828
4 NPT 1/4" 15 60 28 2 100.00
42829
4,3 NPT 1/8" 10 56 22 2 100.00
42830
4,3 NPT 1/4" 20 60 28 2 100.00
42831
4,5 NPT 1/8" 10 56 22 2 100.00
42832
4,5 NPT 1/4" 20 60 28 2 100.00
42833
4,8 NPT 1/8" 10 56 22 2 100.00
42834
4,8 NPT 1/4" 20 60 28 2 100.00
42835
5 NPT 1/8" 10 56 22 2 100.00
42836
5 NPT 1/4" 20 60 28 2 100.00
42837
5,1 NPT 1/8" 10 56 22 2 100.00
42838
5,1 NPT 1/4" 20 60 28 2 100.00
42839
5,5 NPT 1/8" 10 56 22 2 100.00
42840
5,5 NPT 1/4" 20 60 28 2 100.00
42841
6 NPT 1/8" 10 56 22 2 100.00
42842
6 NPT 1/4" 20 60 28 2 100.00
42843
6,4 NPT 1/8" 10 56 22 2 100.00
42844
6,4 NPT 1/4" 20 60 28 2 100.00
Similar products
Thomapor Thomapor
FMI Connection set FMI Connection set
Viewed