Snap-in Spacer made of PA (M3 - M4 male)

Snap-in Spacer made of PA (M3 - M4 male)

Product specification For circuit boards or plates with thickness of 1.6 mm Recommended... more

Close menu

Product specification

For circuit boards or plates with thickness of 1.6 mm

Recommended Ø of mounting hole 4 mm

With snap-in nose

P2 = 10 mm

Material: PA 6.6 (polyamide 6.6)

Colour: black

General Information PA 6 .6 Good coefficient of sliding friction High mechanical... more

Close menu

General Information PA 6.6

Good coefficient of sliding friction

High mechanical stability and fatigue strength

Excellent resilience

Impact resistant

Resistant to abrasion

Resistant to cold

Chemical features:

Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alkohols, esters, ketones, ethers and amines.

Material specification:

The polyamides are universal materials for mechanical functional parts

The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Insulating properties and an amazingly high tensile strength

PA can also be used in the food processing industry and in medical fields

Resistant to corrosion and abrasion

Non-toxic and unmagnetic

Vibration-damping

PA 6.6 features the same chemical resistance as PA 6

PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6

However, PA 6.6 is a little less impact resistant compared to PA 6

Material: PA 6.6 (polyamide 6.6)

Colour: natural

Density: 1.14 g/cm³ (DIN 53479)

Temperature range: -30 to +100 °C

Melting temperature: +255 °C (DIN 53736)

Yield stress: 83 N/mm² (ISO 527)

Elongation at break: 30 % (DIN 53455)

Bending strength: 115 N/mm² (DIN 53452)

Elastic modulus: 3,000 N/mm² (DIN 53457)

Impact resistance (Charpy): without break (DIN 53453)

Notch impact strength (Izod): 60 J/m (ASTM D 256)

Coefficient of sliding friction against steel (dry): 0.35 - 0.42

Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483)

Volume resistivity: 10¹⁵ Ohm x cm (DIN 53482)

Surface resistance: approx. 10¹⁴ Ohm (DIN 53482)

Comparative tracking index (CTI): >600 V (IEC 112)

Dielectric strength: approx. 40 kV/mm (DIN 53481)

Water absorption (saturation): approx. 8.5 % (DIN 53495)

Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

Item	External thread	P1 mm	P2 mm	SW mm	Einheit Stück	Price Euro*
338783	M3 x 0,5	6	10	6	10	43.00
338784	M3 x 0,5	6	10	6	25	93.00
338787	M3 x 0,5	6	10	6	10	43.00
338788	M3 x 0,5	6	10	6	25	93.00
338791	M3 x 0,5	6	10	6	10	43.00
338792	M3 x 0,5	6	10	6	25	93.00
338795	M3 x 0,5	6	10	6	10	50.00
338796	M3 x 0,5	6	10	6	25	105.00
338799	M3 x 0,5	6	10	6	10	50.00
338800	M3 x 0,5	6	10	6	25	105.00
338803	M3 x 0,5	6	10	6	10	50.00
338804	M3 x 0,5	6	10	6	25	105.00
338807	M3 x 0,5	6	10	6	10	50.00
338808	M3 x 0,5	6	10	6	25	105.00
338811	M3 x 0,5	6	10	6	10	54.00
338812	M3 x 0,5	6	10	6	25	118.00
338815	M3 x 0,5	6	10	6	10	54.00
338816	M3 x 0,5	6	10	6	25	118.00
338819	M3 x 0,5	6	10	6	10	54.00
338820	M3 x 0,5	6	10	6	25	118.00
338823	M3 x 0,5	6	10	6	10	54.00
338824	M3 x 0,5	6	10	6	25	118.00
338785	M4 x 0,7	6,4	10	8	10	43.00
338786	M4 x 0,7	6,4	10	8	25	93.00
338789	M4 x 0,7	6,4	10	8	10	43.00
338790	M4 x 0,7	6,4	10	8	25	93.00
338793	M4 x 0,7	6,4	10	8	10	43.00
338794	M4 x 0,7	6,4	10	8	25	93.00
338797	M4 x 0,7	6,4	10	8	10	50.00
338798	M4 x 0,7	6,4	10	8	25	105.00
338801	M4 x 0,7	6,4	10	8	10	50.00
338802	M4 x 0,7	6,4	10	8	25	105.00
338805	M4 x 0,7	6,4	10	8	10	50.00
338806	M4 x 0,7	6,4	10	8	25	105.00
338809	M4 x 0,7	6,4	10	8	10	50.00
338810	M4 x 0,7	6,4	10	8	25	105.00
338813	M4 x 0,7	6,4	10	8	10	54.00
338814	M4 x 0,7	6,4	10	8	25	118.00
338817	M4 x 0,7	6,4	10	8	10	54.00
338818	M4 x 0,7	6,4	10	8	25	118.00
338821	M4 x 0,7	6,4	10	8	10	54.00
338822	M4 x 0,7	6,4	10	8	25	118.00
338825	M4 x 0,7	6,4	10	8	10	54.00
338826	M4 x 0,7	6,4	10	8	25	118.00