gtag('event', 'view_item', { "items": [{ "item_id": "G305665", "item_name": "Cross Recessed Mushroom Head Screw (DIN 7985) made of PA", "item_brand": "Reichelt", "item_category": "Fasteners", "item_category2": "Screws", "item_category3": "Slotted Pan Head Screw", "price": 1 }]});
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Cross Recessed Mushroom Head Screw (DIN 7985) made of PA

Technical specification Material: PA 6.6 (polyamide 66) Colour: natural... more

Technical specification

Material: PA 6.6 (polyamide 66)

Colour: natural

Regulations: DIN 7985, NFE 25121

General Information Good coefficient of sliding friction High mechanical stability and... more

General Information

Good coefficient of sliding friction

High mechanical stability and fatigue strength

Excellent resilience

Impact resistant

Resistant to abrasion

Resistant to cold

Chemical features:

Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines.

Material specification:

The polyamides are universal materials for mechanical functional parts

The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Insulating properties and an amazingly high tensile strength

PA can also be used in the food processing industry and in medical fields

Resistant to corrosion and abrasion

Non-toxic and unmagnetic

Vibration-damping

PA 6.6 features the same chemical resistance as PA 6

PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6

However, PA 6.6 is a little less impact resistant compared to PA 6

Material: PA 6.6 (polyamide 6.6)

Colour: natural

Density: 1.14 g/cm3 (DIN 53479)

Temperature range: -30 to +100 °C

Melting temperature: +255 °C (DIN 53736)

Yield stress: 83 N/mm2 (ISO 527)

Elongation at break: 30 % (DIN 53455)

Bending strength: 115 N/mm2 (DIN 53452)

Elastic modulus: 3,000 N/mm2 (DIN 53457)

Impact resistance (Charpy): without break (DIN 53453)

Notch impact strength (Izod): 60 J/m (ASTM D 256)

Coefficient of sliding friction against steel (dry): 0.35 - 0.42

Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483)

Volume resistivity: 1015 Ohm x cm (DIN 53482)

Surface resistance: approx. 1014 Ohm (DIN 53482)

Comparative tracking index (CTI): >600 V (IEC 112)

Dielectric strength: approx. 40 kV/mm (DIN 53481)

Water absorption (saturation): approx. 8.5 % (DIN 53495)

Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

Item Image External thread Gewindelänge
mm
D
mm
l1
mm
Einheit
Stück
Price
Euro*
Buy
305665
M4 x 0,7 10 8 3,1 50 30.00
305666
M4 x 0,7 10 8 3,1 100 52.00
305668
M4 x 0,7 16 8 3,1 50 30.00
305669
M4 x 0,7 16 8 3,1 100 52.00
305671
M4 x 0,7 20 8 3,1 50 30.00
305672
M4 x 0,7 20 8 3,1 100 52.00
305674
M5 x 0,8 10 9,5 3,7 50 45.00
305675
M5 x 0,8 10 9,5 3,7 100 75.00
305677
M5 x 0,8 16 9,5 3,7 50 45.00
305678
M5 x 0,8 16 9,5 3,7 100 75.00
305680
M5 x 0,8 20 9,5 3,7 50 45.00
305681
M5 x 0,8 20 9,5 3,7 100 75.00
305683
M6 x 1 10 12 4,6 50 52.00
305684
M6 x 1 10 12 4,6 100 88.00
337279
M6 x 1 12 12 4,6 50 52.00
337280
M6 x 1 12 12 4,6 100 88.00
305689
M6 x 1 16 12 4,6 50 52.00
305690
M6 x 1 16 12 4,6 100 88.00
305692
M6 x 1 20 12 4,6 50 54.00
305693
M6 x 1 20 12 4,6 100 93.00
Similar products
PTFE Film PTFE Film
Viewed