window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Pressure Retaining Valve made of steel - back pressure safe | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Pressure Retaining Valve made of steel - back pressure safe

Product specification High-quality materials Stable, low-vibration regulating behavior... more

Product specification

High-quality materials

Stable, low-vibration regulating behavior

Hermetically tight due to valve diaphragm with integral sealing rings

Valve adjustment also under working pressure

Low-maintenance

Resistant to weather and rust-resistant

Technical specification

Material:

Lower valve body: V4A-steel (stainless steel 1.4571), bright

Upper valve body: PP (polypropylene), glass fibre-reinforced, orange (RAL 2005)

Piston: V4A-steel (stainless steel 1.4571)

Separation disc: V4A-steel (stainless steel 1.4571)

Diaphragm: EPDM (ethylene-propylene-diene rubber); on media side PTFE-coated (polytetrafluoroethylene)

Valve seat seal: PTFE (polytetrafluoroethylene)

O-ring sealings of union ends: EPDM (ethylene-propylene-diene rubber); FPM (fluorinated rubber)

Connecting screws: stainless steel 1.4301 (V2A)

Media: technically pure, neutral and aggressive liquids provided that the selected valve materials are resistant at working temperature

Max. temperature: +100 °C

Max. operating pressure: 10 bar at +20 °C

Pressure setting range: 0.3 - 10 bar

Pressure settings: in 0.5 bar steps, between 0.5 and 10 bar

Release pressure: approx. 0.5 bar

Hysteresis: approx. 0.3 bar

Mounting position: optional

Connection: External thread (DIN 8063)

General Information In process plants for maintenance of working- or system-induced counter... more

General Information

In process plants for maintenance of working- or system-induced counter pressures as well as for reduction of pressure pulsation. The special diaphragm design and the interaction of diaphragm surface, valve piston and valve seat keep the working pressure at occurring counter pressure almost constant.

As pressurizing valve in metering pumps for guarantee of metering accuracy. In case of counter pressure at the secondary side the preliminary pressure and thus the metering quantity remain constant.

In all working areas where constant pressure is required.

Operating principle:

Does the working pressure or inlet pressure rise above a certain preset pressure value, the pressurized valve piston is lifted against the spring force. The valve opens and a pressure relief on the outlet side takes place. It closes as soon as the working pressure at the valve piston drops below preset spring force. If a system determined counter pressure arises at the secondary side this pressure has an impact on both simultaneously, namely under the diaphram and on the valve piston, i.e. the forces cancel out each other because the diaphragm and the valve mating surface / effective surface are the same size. The valve force and thus the working pressure remain nearly constant.

Item Image NW
mm
External thread d
mm
Werkstoff Dichtung Einheit
Stück
Price
Euro*
Buy
350874
10 G 3/4" 16 PTFE 1 1,188.00
350875
15 G 1" 20 PTFE 1 1,188.00
350876
20 G 1 1/4" 25 PTFE 1 1,462.00
350877
25 G 1 1/2" 32 PTFE 1 1,462.00
350878
32 G 2" 40 PTFE 1 2,247.00
350879
40 G 2 1/4" 50 PTFE 1 2,247.00
350880
50 G 2 3/4" 63 PTFE 1 2,247.00
Similar products
Viewed