Container for accommodation of sorbent materials and catalysts for fine purification of gases
Especially for gas drying
For removal of specific gaseous contaminants out of air and all non-corrosive gases
For production of water gas with low-nitrogen content
The glass-clear container allows the visual control of the sorbent material at any time.
The end caps are easily unscrewable on both sides.
THOMAPOR®-filter pads provide a safe support of the sorbent material filling on both sides (gas inlet/gas outlet) and for a constant flow through it
Accessory: filter pads (303038-303043)
By default, containers are not de-oiled or degreased. A pre-cleaning can be performed, but not validated with measuring instruments.
End caps: PVC-U (rigid polyvinyl chloride); color: grey according to RAL 7011
O-Rings: NBR (butadiene-acrylonitrile rubber)
Filter pads: polyester staple fibre non-woven fabric (PET), strongly densified; filter class: EU 5
Temperature range: -40 to +60 °C, for a short time up to +70 °C
Max. operating pressure: 2.9 bar to 4.5 bar, depending on type
Connections: internal thread G 1/8" and G 1/4" resp.
General Information Granular Material
Separation of solid or liquid particles out of gases.
Production of pure and purest reference and analysis gases by mechanical separation (filtration) as well as physical and chemical separation (adsorption and catalysis).
Fine gas purification is performed by catalysis and adsorption allowing reduction of contaminants up to few ppb.
||150||4,5||40||G 1/8"||60 x 145||1||257.00|
||200||4,5||40||G 1/8"||60 x 185||1||284.00|
||300||4,5||40||G 1/8"||60 x 265||1||321.00|
||330||3,3||60||G 1/4"||82 x 145||1||327.00|
||500||3,3||60||G 1/4"||82 x 205||1||375.00|
||670||3,3||60||G 1/4"||82 x 265||1||412.00|
||840||3,3||60||G 1/4"||82 x 325||1||445.00|
||1.010||3,3||60||G 1/4"||82 x 385||1||482.00|
||1.600||2,9||80||G 1/4"||102 x 345||1||568.00|
||2.400||2,9||80||G 1/4"||102 x 505||1||675.00|