window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); High-Performance NBR Clamp Seals - Standard: ISO 2852 | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

High-Performance NBR Clamp Seals - Standard: ISO 2852

No additional information available.
General Information Very good choice for applications involving mechanical load, as well as... more

General Information

Very good choice for applications involving mechanical load, as well as in mineral oils, fats and waxes, motor oils and fuels

Well suited for use in CIP / SIP media for continuous plants in the food, beverage and pharmaceutical industries

CIP (Cleaning in Place) = diluted acids or bases combined with cleaning additives

SIP (Sterilization in Place) = disinfectants, steam, oxidizing media (e.g. hypochlorite) and / or polar organic solvents (e.g. acetic acid)

Should not be used in concentrated acids (e.g. nitric or formic acid), concentrated oxidizing media (e.g. peracetic acid), aromatic and chlorinated hydrocarbons

Good abrasion resistance

Good thermal resistance

The level of ACN is tailored to the specific application, so that the optimal balance of chemical resistance and low-temperature flexibility is achieved

Good resistance to mineral oil and fuels, outstanding resistance to vegetable and animal oils, silicones, diluted acids and bases at room temperature

In aromatic and chlorinated hydrocarbons NBR is prone to swelling

Material: NBR (butadiene-acrylonitrile-rubber)

Color: black

Crosslinking: peroxidic

Shore hardness A: 70° ±5° (test plate) (DIN 53505)

Density: 1.17 ±0.02 g/cm3 (DIN EN ISO 1183)

Rebound elasticity: 28 % (DIN 53512)

Modulus at 100 % elongation: 5.5 N/mm2 (DIN 53504)

Tensile strength: 18.5 N/mm2 (DIN 53504)

Elongation at break: 240 % (DIN 53504)

Tear propagation resistance: 10 N/mm2 (DIN 53515)

Compression set: <20 % at +100 °C / 22 h / 25 %

Temperature range: -20 to +100 °C

Item Image For flange size
inch
d
mm
D
mm
Tri-Clamp-Ø
mm
Unit
piece
Price
Euro*
Buy
410854
1" 22,8 43,5 50,5 2 76.00
410855
1" 22,8 43,5 50,5 6 192.00
410856
1 1/2" 35,8 43,5 50,5 2 76.00
410857
1 1/2" 35,8 43,5 50,5 6 192.00
410858
2" 48,8 56,5 64 2 84.00
410859
2" 48,8 56,5 64 6 210.00
410860
2 1/2" 60,5 70,5 77,5 2 96.00
410861
2 1/2" 60,5 70,5 77,5 6 240.00
410862
3" 73,1 83,5 91 2 112.00
410863
3" 73,1 83,5 91 6 282.00
410864
4" 97,8 110 119 2 132.00
410865
4" 97,8 110 119 6 324.00
Viewed