||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); POM Quick-Disconnect Coupling, NW 30 mm | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

POM Quick-Disconnect Coupling, NW 30 mm

Product specification Female coupling part. With port or shut-off and internal thread for... more

Product specification

Female coupling part. With port or shut-off and internal thread for piping connection. Can be combined with all male coupling parts of nominal width 30 mm.

General Information Quick-Disconnect Coupling THOMAFLUID ® -quick-disconnect coupling... more

General Information Quick-Disconnect Coupling

THOMAFLUID®-quick-disconnect coupling systems are excellently suited for connecting and disconnecting of tubes, apparatuses etc. The quick-disconnect couplings are easy to operate, connecting and disconnecting can be done by one hand. The coupling is self-locking when the nipple is plugged-in. For disconnection a short thumb pressure on the lock is sufficient to pull out the nipple easily. All nipples are fitted with an easily interchangeable, reliably sealing O-ring.

A complete operable THOMAFLUID®-quick-disconnect coupling system consists of a coupling part and a nipple part, both parts may be fitted with valves. A complete quick-disconnect coupling system locking at one side consists of a coupling part with shut-off and a nipple part with port, or a coupling part with port and a nipple part with shut-off. To get a coupling locking on both sides, a coupling part as well as a nipple part, both with shut-off, have to be obtained.

General Information POM

For compressed air, gases, liquids, and vacuum, floor cleaning equipment, filtration of deionized water, dispensing equipment, automated machines, compression therapy, leak detectors.

The coupling parts (couplings and nipples) are made of thermoplastic acetal in the injection-moulding process. They are robust and usable with the most mild chemicals.

Resistant to alcohol, aldehydes, petrol, ethers, esters, glykols and motor oils, within the pH range of 4 to 9 also to alkalis and acids.

General Information 30 mm nominal width

Macro high-flow quick-disconnect coupling parts.

Pressure loadable plug-in coupling parts with very large through bore, made of resistant, gray-dyed polyacetal, for pipe screwed fittings or for connection of tubing with THOMAFLUID®-tube connecting pieces, items 16035 to 16038.


Valve body: POM, grey (polyacetal, polyoxymethylene)

Gasket: NBR (butadiene-rubber)

Colour: grey

Nominal width: 30 mm

Temperature range: -20 to +80 °C

Max. operating pressure: 10 bar at +20 °C

Cross sectional area of port: 710 mm2

Item Image Internal thread Ventil Länge
G 1 1/2" mit 114 1 147.00
G 2" mit 116 1 159.00
G 1 1/2" ohne 84 1 122.00