window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Elbow Pipe Connector with Female Thread made of PP, PVDF or PTFE | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Elbow Pipe Connector with Female Thread made of PP, PVDF or PTFE

Product specification L-shape, pipe connection on one side; female G- or M-thread on the... more

Product specification

L-shape, pipe connection on one side; female G- or M-thread on the other side

General Information EMP-4 THOMAFLUID ® -pipe screw fittings are used for connecting pipes... more

General Information EMP-4

THOMAFLUID®-pipe screw fittings are used for connecting pipes made of various materials such as metal, glass or plastic e.g. PA, PTFE or PVDF. This represents a considerable advantage of this kind of screwed fittings. The screw fitting is not limited to use with rigid pipes but also with flexible pipes or tubing. In this case, carrying brackets (items 22036-54) are required.

THOMAFLUID®-pipe screw fittings of the MULTIFIT®-EMP-series can be screwed into THOMAFLUID®-valves, cocks, and flowmeters of the MULTIFIT®-EMP-series.

Assembly:

The connection principle entails pushing the pipe against the inner edge of the connector and sealing with a sealing ring. The pipe is secured in place by a cutting ring (PEEK), which is forced against the pipe by a nut. The more the nut is screwed onto the connector body, the more the slotted cutting ring wedges the pipe. The result is a tight, friction-locked connection, which can be released at any time. The design concept eliminates the dead volume. It also has no effect on the flow because the inside diameter is identical to that of the pipe.

If flexible tubing has have to be adapted using THOMAFLUID®-pipe screw fittings, first the carrying brackets have to be put in the flexible tubes. Afterwards, the fixed assembly is done by tightening the cap nut.

PP (Polypropylene)

Extremely good impact toughness and notch impact strength

Higher hardness and stiffness as well as better resilience than PE

Thermoforming possible

Very good dielectrical properties

Good resistance to alcohols, ketones, conc. acids and alkalis

Not stable to aromatic hydrocarbons, fats and oils, halogenes

Autoclavable

Resistant to hydrolysis

Physiologically safe

Colour: grey

Density: 0.90 g/cm3

Temperature range: +5 to +90 °C

Shore hardness D: 72°

Max. operating pressure: 10 bar at +20 °C

Water absorption: <0.05 %

Tensile strength: 25 - 40 N/mm2

Elongation at break: 800 %

Surface resistance: >1013 Ohm

Melt flow index MFR: 0.3 g/10 min.

PVDF (Polyvinylidene fluoride)

High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.

High impact toughness even at low temperatures

Good breakdown strength

Low dielectric loss factor

Highest mechanical stability and stiffness

Meeting highest purity requirements

Comply with the guidelines from FDA and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.

Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualities

Outstanding resistance to UV, weather and aging

Flame-resistant

High thermal stability

Resistant to alcohols, fats and oils, halogenes, alkalis, acids

Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid

Colour: nature, slightly translucent

Density: 1.75 g/cm3

Temperature range: -40 to +140 °C

Shore hardness D: 79°

Max. operating pressure: 10 bar at +20 °C

Water absorption: <0.04 %

Tensile strength: 38 - 50 N/mm2

Surface resistance: >1013 Ohm

Melt flow index MFR: 6 g/10 min.

PTFE (Polytetrafluoroethylene)

Heavy-duty plastic

Antiadhesive surface

Outstanding sliding properties

Lowest friction coefficient of all fluorinated plastics

Excellent stress cracking resistance

Excellent weather resistance

Highest gas-tightness

No water absorption

Very good dielectric properties independent of frequency and temperature

Very good electrical insulating capacity also at air humidity

High tracking resistance

Non-combustible

Colour: milky, white

Density: 2.20 g/cm3

Temperature range: -200 to +150 °C

Shore hardness D: 60°

Max. operating pressure: 6 bar at +20 °C

Tearing strength: 30 - 40 N/mm2

Elongation at break: 300 %

Water absorption: 0.01 %

Surface resistance: >1017 Ohm

Item Image Pipe outside Ø
mm
Internal thread D
mm
l1
mm
L1
mm
L2
mm
Material Unit
piece
Price
Euro*
Buy
10722
4 G 1/8" 15 12 36 17 PP 10 180.00
10723
4 G 1/8" 15 12 36 17 PTFE 5 155.00
10724
4 G 1/8" 15 12 36 17 PVDF 5 140.00
10725
4 G 1/4" 20 15 39 20 PP 10 180.00
10726
4 G 1/4" 20 15 39 20 PTFE 5 155.00
10727
4 G 1/4" 20 15 39 20 PVDF 5 140.00
10728
4 G 3/8" 25 15 42 20 PP 5 110.00
10729
4 G 3/8" 25 15 42 20 PTFE 3 138.00
10730
4 G 3/8" 25 15 42 20 PVDF 3 126.00
10731
4 G 1/2" 30 16 44 20 PP 5 115.00
10732
4 G 1/2" 30 16 44 20 PTFE 2 108.00
10733
4 G 1/2" 30 16 44 20 PVDF 2 96.00
22819
6 G 1/8" 15 12 36 17 PP 10 180.00
22820
6 G 1/8" 15 12 36 17 PTFE 5 155.00
22821
6 G 1/8" 15 12 36 17 PVDF 5 140.00
22823
6 G 1/4" 20 15 39 20 PP 10 180.00
22824
6 G 1/4" 20 15 39 20 PTFE 5 155.00
22825
6 G 1/4" 20 15 39 20 PVDF 5 140.00
22827
6 G 3/8" 25 15 42 20 PP 5 110.00
22828
6 G 3/8" 25 15 42 20 PTFE 3 138.00
22829
6 G 3/8" 25 15 42 20 PVDF 3 126.00
22831
6 G 1/2" 30 16 44 20 PP 5 115.00
22832
6 G 1/2" 30 16 44 20 PTFE 2 108.00
22833
6 G 1/2" 30 16 44 20 PVDF 2 96.00
22835
8 G 1/8" 15 12 36 17 PP 5 130.00
22836
8 G 1/8" 15 12 36 17 PTFE 2 107.00
22837
8 G 1/8" 15 12 36 17 PVDF 2 96.00
22839
8 G 1/4" 20 15 39 20 PP 5 130.00
22840
8 G 1/4" 20 15 39 20 PTFE 2 108.00
22841
8 G 1/4" 20 15 39 20 PVDF 2 96.00
22843
8 G 3/8" 25 15 42 20 PP 5 130.00
22844
8 G 3/8" 25 15 42 20 PTFE 2 113.00
22845
8 G 3/8" 25 15 42 20 PVDF 2 104.00
22847
8 G 1/2" 30 16 44 20 PP 5 165.00
22848
8 G 1/2" 30 16 44 20 PTFE 2 128.00
22849
8 G 1/2" 30 16 44 20 PVDF 2 116.00
22851
10 G 1/8" 20 12 41 20 PP 5 175.00
22852
10 G 1/8" 20 12 41 20 PTFE 2 128.00
22853
10 G 1/8" 20 12 41 20 PVDF 2 116.00
22855
10 G 1/4" 20 15 41 23 PP 5 172.00
22856
10 G 1/4" 20 15 41 23 PTFE 2 128.00
22857
10 G 1/4" 20 15 41 23 PVDF 2 116.00
22859
10 G 3/8" 25 15 44 23 PP 5 176.00
22860
10 G 3/8" 25 15 44 23 PTFE 2 128.00
22861
10 G 3/8" 25 15 44 23 PVDF 2 116.00
22863
10 G 1/2" 30 16 46 23 PP 3 123.00
22864
10 G 1/2" 30 16 46 23 PTFE 2 134.00
22865
10 G 1/2" 30 16 46 23 PVDF 2 122.00
22867
12 G 1/8" 20 12 43 20 PP 3 123.00
22868
12 G 1/8" 20 12 43 20 PTFE 2 134.00
22869
12 G 1/8" 20 12 43 20 PVDF 2 122.00
22871
12 G 1/4" 20 15 43 23 PP 3 123.00
22872
12 G 1/4" 20 15 43 23 PTFE 2 134.00
22873
12 G 1/4" 20 15 43 23 PVDF 2 122.00
22875
12 G 3/8" 25 15 46 23 PP 3 123.00
22876
12 G 3/8" 25 15 46 23 PTFE 2 133.00
22877
12 G 3/8" 25 15 46 23 PVDF 2 122.00
22879
12 G 1/2" 30 16 48 23 PP 3 132.00
22880
12 G 1/2" 30 16 48 23 PTFE 2 140.00
22881
12 G 1/2" 30 16 48 23 PVDF 2 128.00
22883
14 G 1/8" 25 12 47 20 PP 3 126.00
22884
14 G 1/8" 25 12 47 20 PTFE 1 78.00
22885
14 G 1/8" 25 12 47 20 PVDF 1 71.00
22887
14 G 1/4" 25 15 47 23 PP 3 126.00
22888
14 G 1/4" 25 15 47 23 PTFE 1 78.00
22889
14 G 1/4" 25 15 47 23 PVDF 1 71.00
22891
14 G 3/8" 25 15 47 23 PP 3 126.00
22892
14 G 3/8" 25 15 47 23 PTFE 1 94.00
22893
14 G 3/8" 25 15 47 23 PVDF 1 85.00
22895
14 G 1/2" 30 16 49 23 PP 2 98.00
22896
14 G 1/2" 30 16 49 23 PTFE 1 104.00
22897
14 G 1/2" 30 16 49 23 PVDF 1 94.00
22899
6 M10 x 1,5 15 12 36 17 PP 10 a.A.
22900
6 M10 x 1,5 15 12 36 17 PTFE 5 a.A.
22901
6 M10 x 1,5 15 12 36 17 PVDF 5 a.A.
22903
6 M12 x 1,5 20 15 39 20 PP 10 a.A.
22904
6 M12 x 1,5 20 15 39 20 PTFE 5 a.A.
22905
6 M12 x 1,5 20 15 39 20 PVDF 5 a.A.
22907
6 M16 x 1,5 25 15 42 20 PP 5 a.A.
22908
6 M16 x 1,5 25 15 42 20 PTFE 3 a.A.
22909
6 M16 x 1,5 25 15 42 20 PVDF 3 a.A.
22911
6 M18 x 1,5 25 15 42 20 PP 5 a.A.
22912
6 M18 x 1,5 25 15 42 20 PTFE 2 a.A.
22913
6 M18 x 1,5 25 15 42 20 PVDF 2 a.A.
22915
8 M10 x 1,5 15 12 36 17 PP 10 a.A.
22916
8 M10 x 1,5 15 12 36 17 PTFE 5 a.A.
22917
8 M10 x 1,5 15 12 36 17 PVDF 5 a.A.
22919
8 M12 x 1,5 20 15 39 20 PP 10 a.A.
22920
8 M12 x 1,5 20 15 39 20 PTFE 5 a.A.
22921
8 M12 x 1,5 20 15 39 20 PVDF 5 a.A.
22923
8 M16 x 1,5 25 15 42 20 PP 5 a.A.
22924
8 M16 x 1,5 25 15 42 20 PTFE 3 a.A.
22925
8 M16 x 1,5 25 15 42 20 PVDF 3 a.A.
22927
8 M18 x 1,5 25 15 42 20 PP 5 a.A.
22928
8 M18 x 1,5 25 15 42 20 PTFE 2 a.A.
22929
8 M18 x 1,5 25 15 42 20 PVDF 2 a.A.
22931
10 M10 x 1,5 20 12 41 20 PP 5 a.A.
22932
10 M10 x 1,5 20 12 41 20 PTFE 2 a.A.
22933
10 M10 x 1,5 20 12 41 20 PVDF 2 a.A.
22935
10 M12 x 1,5 20 15 41 23 PP 5 a.A.
22936
10 M12 x 1,5 20 15 41 23 PTFE 2 a.A.
22937
10 M12 x 1,5 20 15 41 23 PVDF 2 a.A.
22939
10 M16 x 1,5 25 15 44 23 PP 5 a.A.
22940
10 M16 x 1,5 25 15 44 23 PTFE 2 a.A.
22941
10 M16 x 1,5 25 15 44 23 PVDF 2 a.A.
22943
10 M18 x 1,5 25 15 44 23 PP 5 a.A.
22944
10 M18 x 1,5 25 15 44 23 PTFE 2 a.A.
22945
10 M18 x 1,5 25 15 44 23 PVDF 2 a.A.
22947
12 M12 x 1,5 20 15 43 23 PP 5 a.A.
22948
12 M12 x 1,5 20 15 43 23 PTFE 2 a.A.
22949
12 M12 x 1,5 20 15 43 23 PVDF 2 a.A.
22951
12 M14 x 1,5 20 15 43 23 PP 5 a.A.
22952
12 M14 x 1,5 20 15 43 23 PTFE 2 a.A.
22953
12 M14 x 1,5 20 15 43 23 PVDF 2 a.A.
22955
12 M16 x 1,5 25 15 46 23 PP 5 a.A.
22956
12 M16 x 1,5 25 15 46 23 PTFE 2 a.A.
22957
12 M16 x 1,5 25 15 46 23 PVDF 2 a.A.
22959
12 M18 x 1,5 25 15 46 23 PP 3 a.A.
22960
12 M18 x 1,5 25 15 46 23 PTFE 2 a.A.
22961
12 M18 x 1,5 25 15 46 23 PVDF 2 a.A.
22963
14 M12 x 1,5 25 15 47 23 PP 3 a.A.
22964
14 M12 x 1,5 25 15 47 23 PTFE 2 a.A.
22965
14 M12 x 1,5 25 15 47 23 PVDF 2 a.A.
22967
14 M14 x 1,5 25 15 47 23 PP 3 a.A.
22968
14 M14 x 1,5 25 15 47 23 PTFE 2 a.A.
22969
14 M14 x 1,5 25 15 47 23 PVDF 2 a.A.
22971
14 M16 x 1,5 25 15 47 23 PP 3 a.A.
22972
14 M16 x 1,5 25 15 47 23 PTFE 2 a.A.
22973
14 M16 x 1,5 25 15 47 23 PVDF 2 a.A.
22975
14 M18 x 1,5 25 15 47 23 PP 3 a.A.
22976
14 M18 x 1,5 25 15 47 23 PTFE 2 a.A.
22977
14 M18 x 1,5 25 15 47 23 PVDF 2 a.A.
Viewed