Items

Micro T-Shaped Connector made of PTFE

Previous
#DetailNavNext#
Micro T-Shaped Connector made of PTFE
 
 

Product specification

Symmetrical T-shaped connector, arm length 28 mm, for tubings of rigid plastics or metal.

 

General Information

A long sealing cone (ferrule) put at the end of the tubing is solidly screwed into the conical fit of the connector by means of a knurled cap nut. The resistance to withdrawing forces is increased by the contact pressure on the tubing exerted by the cap nut on a FPM-O-ring via a pressure pad.

PVDF (Polyvinylidene fluoride)

High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.

High impact toughness even at low temperatures

Highest mechanical stability and stiffness

Good breakdown strength

Low dielectric loss factor

Physiologically safe

Meeting highest purity requirements

Outstanding resistance to UV, weather and aging

Flame-resistant

High thermal stability

Resistant to alcohols, fats and oils, halogenes, alkalis, acids

Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid

Colour: nature, slightly translucent

Density: 1.75 g/cm3

Temperature range: -40 to +140 °C

Shore hardness D: 79° (great hardness)

Max. operating pressure: 1 bar at +20 °C

Water absorption: <0.04 % (water resistant)

Tensile strength: 38 - 50 N/mm2

Elongation at break: 12 %

Surface resistance: >1013 Ohm

Melt flow index MFR: 6 g/10 min.

PTFE (Polytetrafluoroethylene)

Heavy-duty plastic

Antiadhesive surface

Outstanding sliding properties

Lowest friction coefficient of all fluorinated plastics

Excellent stress cracking resistance

Excellent weather resistance

Highest gas-tightness

No water absorption

Very good dielectric properties independent of frequency and temperature

Very good electrical insulating capacity also at air humidity

High tracking resistance

Non-combustible

Colour: milky, white

Density: 2.20 g/cm3

Temperature range: -200 to +150 °C

Shore hardness D: 60°

Max. operating pressure: 1 bar

Tearing strength: 30 - 40 N/mm2

Elongation at break: 300 %

Water absorption: 0.01 %

Surface resistance: >1017 Ohm

Position Item Tubing outside Ø
mm
L1
mm
L2
mm
Unit
piece
Price
Euro
Buy
1 49950 0.7 56 28 2 119.00 Warenkorb
2 49951 1 56 28 2 119.00 Warenkorb
3 49952 1.5 56 28 2 119.00 Warenkorb
4 49953 1.6 56 28 2 119.00 Warenkorb
5 49954 1.8 56 28 2 119.00 Warenkorb
6 49955 2 56 28 2 119.00 Warenkorb
7 49956 2.5 56 28 2 119.00 Warenkorb
8 49957 2.8 56 28 2 119.00 Warenkorb
9 49958 3 56 28 2 119.00 Warenkorb
10 49959 3.1 56 28 2 119.00 Warenkorb
11 49960 3.2 56 28 2 119.00 Warenkorb
12 49961 3.5 56 28 2 119.00 Warenkorb
13 49962 3.6 56 28 2 119.00 Warenkorb
14 49963 4 56 28 2 119.00 Warenkorb
15 49964 4.3 56 28 2 119.00 Warenkorb
16 49965 4.5 56 28 2 119.00 Warenkorb
17 49966 4.8 56 28 2 119.00 Warenkorb
18 49967 5 56 28 2 119.00 Warenkorb
19 49968 5.1 56 28 2 119.00 Warenkorb
20 49969 5.5 56 28 2 119.00 Warenkorb
21 49970 6 56 28 2 119.00 Warenkorb
22 49971 6.4 56 28 2 119.00 Warenkorb

Topseller

 
 

Viewed

Recently Viewed