window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Slotted Nut-Plug made of PA | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Slotted Nut-Plug made of PA

Technical specification Material: PA 6.6 (polyamide 66) Colour: black or white more

Technical specification

Material: PA 6.6 (polyamide 66)

Colour: black or white

General Information Good coefficient of sliding friction High mechanical stability and... more

General Information

Good coefficient of sliding friction

High mechanical stability and fatigue strength

Excellent resilience

Impact resistant

Resistant to abrasion

Resistant to cold

Chemical features:

Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines

Material specification:

The polyamides are universal materials for mechanical functional parts

The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Insulating properties and an amazingly high tensile strength

PA can also be used in the food processing industry and in medical fields

Resistant to corrosion and abrasion

Non-toxic and unmagnetic

Vibration-damping

PA 6.6 features the same chemical resistance as PA 6

PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6

However, PA 6.6 is a little less impact resistant compared to PA 6

Material: PA 6.6 (polyamide 6.6)

Colour: natural

Density: 1.14 g/cm3 (DIN 53479)

Temperature range: -30 to +100 °C

Melting temperature: +255 °C (DIN 53736)

Yield stress: 83 N/mm2 (ISO 527)

Elongation at break: 30 % (DIN 53455)

Bending strength: 115 N/mm2 (DIN 53452)

Elastic modulus: 3,000 N/mm2 (DIN 53457)

Impact resistance (Charpy): without break (DIN 53453)

Notch impact strength (Izod): 60 J/m (ASTM D 256)

Coefficient of sliding friction against steel (dry): 0.35 – 0.42

Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483)

Volume resistivity: 1015 Ohm x cm (DIN 53482)

Surface resistance: approx. 1014 Ohm (DIN 53482)

Comparative tracking index (CTI): >600 V (IEC 112)

Dielectric strength: approx. 40 kV/mm (DIN 53481)

Water absorption (saturation): approx. 8.5 % (DIN 53495)

Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

Item Image Internal thread d
mm
D
mm
h
mm
Colour Unit
piece
Price
Euro*
Buy
306038
M4 x 0,7 5 12 10 schwarz 50 29.00
306039
M4 x 0,7 5 12 10 schwarz 100 49.00
306040
M4 x 0,7 5 12 10 weiß 50 29.00
306041
M4 x 0,7 5 12 10 weiß 100 49.00
306042
M6 x 1 8 16 15,5 schwarz 50 38.00
306043
M6 x 1 8 16 15,5 schwarz 100 65.00
306044
M6 x 1 8 16 15,5 weiß 50 38.00
306045
M6 x 1 8 16 15,5 weiß 100 65.00
306046
M8 x 1,25 12 20 12 schwarz 50 49.00
306047
M8 x 1,25 12 20 12 schwarz 100 83.00
306048
M8 x 1,25 12 20 12 weiß 50 49.00
306049
M8 x 1,25 12 20 12 weiß 100 83.00
306050
M10 x 1,5 15 22 12 schwarz 25 39.00
306051
M10 x 1,5 15 22 12 schwarz 50 65.00
306052
M10 x 1,5 15 22 12 weiß 25 39.00
306053
M10 x 1,5 15 22 12 weiß 50 65.00
Viewed