Complete simultaneous quick-release coupling system for ten separate gas or liquid flexible conduits with parallel ports, consisting of a coupling casing with ten nipple inserts (type "V" male) and a coupling casing with ten coupling inserts (type "M" female), additional adapter for front panel mounting available.
Casing: PA 6.6 (polyamide 66)
Springs: stainless steel
POM inserts: -40 to +80 °C
PP inserts: 0 to +80 °C
Max. operating pressure: up to 6.9 bar per line at +20 °C
Mounting type: optionally fixed front panel mounting with bulkhead screwed fitting with additonal adapter
General Information Quick-Disconnect Coupling
THOMAFLUID®-quick-disconnect coupling systems are excellently suited for connecting and disconnecting of tubes, apparatuses etc. The quick-disconnect couplings are easy to operate, connecting and disconnecting can be done by one hand. The coupling is self-locking when the nipple is plugged-in. For disconnection a short thumb pressure on the lock is sufficient to pull out the nipple easily. All nipples are fitted with an easily interchangeable, reliably sealing O-ring.
A complete operable THOMAFLUID®-quick-disconnect coupling system consists of a coupling part and a nipple part, both parts may be fitted with valves. A complete quick-disconnect coupling system locking at one side consists of a coupling part with shut-off and a nipple part with port, or a coupling part with port and a nipple part with shut-off. To get a coupling locking on both sides, a coupling part as well as a nipple part, both with shut-off, have to be obtained.
|Item||Image||Connection||Ventil||Werkstoff Dichtung||Werkstoff Einsätze||
||Tülle 1,6 mm||ohne||NBR||POM||1||74.00|
||Tülle 3 mm||ohne||NBR||POM||1||74.00|
||Tülle 4 mm||ohne||NBR||POM||1||74.00|
||Tülle 1,6 mm||mit||NBR||POM||1||201.00|
||Tülle 3 mm||mit||NBR||POM||1||201.00|
||Tülle 4 mm||mit||NBR||POM||1||201.00|
||Tülle 1,6 mm||ohne||EPDM||PP||1||91.00|
||Tülle 4 mm||ohne||EPDM||PP||1||91.00|