+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

T-Shaped Pipe Connector with Male Thread made of PP, PVDF or PTFE

Product specification T-shape, pipe connection on two sides; male G-, NPT- or M-thread on the... more

Product specification

T-shape, pipe connection on two sides; male G-, NPT- or M-thread on the third side

General Information THOMAFLUID ® -pipe screw fittings are used for connecting pipes made... more

General Information

THOMAFLUID®-pipe screw fittings are used for connecting pipes made of various materials such as metal, glass or plastic e.g. PA, PTFE or PVDF. This represents a considerable advantage of this kind of screwed fittings. The screw fitting is not limited to use with rigid pipes but also with flexible pipes or tubing. In this case, carrying brackets (items 22036-54) are required.

THOMAFLUID®-pipe screw fittings of the MULTIFIT®-EMP-series can be screwed into THOMAFLUID®-valves, cocks, and flowmeters of the MULTIFIT®-EMP-series.

Assembly:

The connection principle entails pushing the pipe against the inner edge of the connector and sealing with a sealing ring. The pipe is secured in place by a cutting ring (PEEK), which is forced against the pipe by a nut. The more the nut is screwed onto the connector body, the more the slotted cutting ring wedges the pipe. The result is a tight, friction-locked connection, which can be released at any time. The design concept eliminates the dead volume. It also has no effect on the flow because the inside diameter is identical to that of the pipe.

If flexible tubing has have to be adapted using THOMAFLUID®-pipe screw fittings, first the carrying brackets have to be put in the flexible tubes. Afterwards, the fixed assembly is done by tightening the cap nut.

PP (Polypropylene)

Extremely good impact toughness and notch impact strength

Higher hardness and stiffness as well as better resilience than PE

Thermoforming possible

Very good dielectrical properties

Good resistance to alcohols, ketones, conc. acids and alkalis

Not stable to aromatic hydrocarbons, fats and oils, halogenes

Autoclavable

Resistant to hydrolysis

Physiologically safe

Colour: grey

Density: 0.90 g/cm3

Temperature range: +5 to +90 °C

Shore hardness D: 72°

Max. operating pressure: 10 bar

Water absorption: <0.05 %

Tensile strength: 25 - 40 N/mm2

Elongation at break: 800 %

Surface resistance: >1013 Ohm

Melt flow index MFR: 0.3 g/10 min.

PVDF (Polyvinylidene fluoride)

High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.

High impact toughness even at low temperatures

Good breakdown strength

Low dielectric loss factor

Highest mechanical stability and stiffness

Meeting highest purity requirements

Comply with the guidelines from FDA and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.

Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualities

Outstanding resistance to UV, weather and aging

Flame-resistant

High thermal stability

Resistant to alcohols, fats and oils, halogenes, alkalis, acids

Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid

Colour: nature, slightly translucent

Density: 1.75 g/cm3

Temperature range: -40 to +140 °C

Shore hardness D: 79°

Max. operating pressure: 10 bar

Water absorption: <0.04 %

Tensile strength: 38 - 50 N/mm2

Surface resistance: >1013 Ohm

Melt flow index MFR: 6 g/10 min.

PTFE (Polytetrafluoroethylene)

Heavy-duty plastic

Antiadhesive surface

Outstanding sliding properties

Lowest friction coefficient of all fluorinated plastics

Excellent stress cracking resistance

Excellent weather resistance

Highest gas-tightness

No water absorption

Very good dielectric properties independent of frequency and temperature

Very good electrical insulating capacity also at air humidity

High tracking resistance

Non-combustible

Colour: milky, white

Density: 2.20 g/cm3

Temperature range: -200 to +150 °C

Shore hardness D: 60°

Max. operating pressure: 6 bar

Tearing strength: 30 - 40 N/mm2

Elongation at break: 300 %

Water absorption: 0.01 %

Surface resistance: >1017 Ohm

Zum anzeigen der Varianten bitte im Querformat benutzen.
Item Image Pipe outside Ø
mm
External thread D
mm
l1
mm
L1
mm
L2
mm
Material Unit
piece
Price
Euro*
Buy
10699
4 G 1/8" 15 8 48 23 PP 10 70.00
10700
4 G 1/8" 15 8 48 23 PTFE 1 85.00
10701
4 G 1/8" 15 8 48 23 PVDF 1 75.00
10702
4 G 1/4" 15 12 48 27 PP 10 70.00
10703
4 G 1/4" 15 12 48 27 PTFE 1 85.00
10704
4 G 1/4" 15 12 48 27 PVDF 1 67.00
10705
4 G 3/8" 20 12 54 27 PP 10 140.00
10706
4 G 3/8" 20 12 54 27 PTFE 1 95.00
10707
4 G 3/8" 20 12 54 27 PVDF 1 86.00
10708
4 G 1/2" 25 14 60 29 PP 10 150.00
10709
4 G 1/2" 25 14 60 29 PTFE 1 106.00
10710
4 G 1/2" 25 14 60 29 PVDF 1 95.00
23039
6 G 1/8" 15 8 48 23 PP 10 67.00
23040
6 G 1/8" 15 8 48 23 PTFE 1 85.00
23041
6 G 1/8" 15 8 48 23 PVDF 1 75.00
23043
6 G 1/4" 15 12 48 27 PP 10 70.00
23044
6 G 1/4" 15 12 48 27 PTFE 1 85.00
23045
6 G 1/4" 15 12 48 27 PVDF 1 75.00
23047
6 G 3/8" 20 12 54 27 PP 10 140.00
23048
6 G 3/8" 20 12 54 27 PTFE 1 95.00
23049
6 G 3/8" 20 12 54 27 PVDF 1 86.00
23051
6 G 1/2" 25 14 60 29 PP 10 150.00
23052
6 G 1/2" 25 14 60 29 PTFE 1 106.00
23053
6 G 1/2" 25 14 60 29 PVDF 1 95.00
23055
8 G 1/8" 15 8 48 24 PP 10 142.00
23056
8 G 1/8" 15 8 48 24 PTFE 1 106.00
23057
8 G 1/8" 15 8 48 24 PVDF 1 95.00
23059
8 G 1/4" 15 12 48 28 PP 10 150.00
23060
8 G 1/4" 15 12 48 28 PTFE 1 106.00
23061
8 G 1/4" 15 12 48 28 PVDF 1 95.00
23063
8 G 3/8" 20 12 54 28 PP 10 153.00
23064
8 G 3/8" 20 12 54 28 PTFE 1 105.00
23065
8 G 3/8" 20 12 54 28 PVDF 1 94.00
23067
8 G 1/2" 25 14 60 30 PP 10 170.00
23068
8 G 1/2" 25 14 60 30 PTFE 1 124.00
23069
8 G 1/2" 25 14 60 30 PVDF 1 112.00
23071
10 G 1/8" 20 8 56 26 PP 10 170.00
23072
10 G 1/8" 20 8 56 26 PTFE 1 124.00
23073
10 G 1/8" 20 8 56 26 PVDF 1 112.00
23075
10 G 1/4" 20 12 56 30 PP 10 170.00
23076
10 G 1/4" 20 12 56 30 PTFE 1 124.00
23077
10 G 1/4" 20 12 56 30 PVDF 1 112.00
23079
10 G 3/8" 20 12 56 30 PP 10 164.00
23080
10 G 3/8" 20 12 56 30 PTFE 1 125.00
23081
10 G 3/8" 20 12 56 30 PVDF 1 112.00
23083
10 G 1/2" 25 14 62 32 PP 10 180.00
23084
10 G 1/2" 25 14 62 32 PTFE 1 126.00
23085
10 G 1/2" 25 14 62 32 PVDF 1 114.00
23087
12 G 1/4" 20 12 58 32 PP 5 115.00
23088
12 G 1/4" 20 12 58 32 PTFE 1 117.00
23089
12 G 1/4" 20 12 58 32 PVDF 1 113.00
23091
12 G 3/8" 20 12 58 32 PP 5 114.00
23092
12 G 3/8" 20 12 58 32 PTFE 1 124.00
23093
12 G 3/8" 20 12 58 32 PVDF 1 113.00
23095
12 G 1/2" 25 14 64 34 PP 5 126.00
23096
12 G 1/2" 25 14 64 34 PTFE 1 131.00
23097
12 G 1/2" 25 14 64 34 PVDF 1 86.00
23099
14 G 1/4" 25 12 64 34 PP 3 126.00
23100
14 G 1/4" 25 12 64 34 PTFE 1 94.00
23101
14 G 1/4" 25 12 64 34 PVDF 1 85.00
23103
14 G 3/8" 25 12 64 34 PP 3 132.00
23104
14 G 3/8" 25 12 64 34 PTFE 1 106.00
23105
14 G 3/8" 25 12 64 34 PVDF 1 94.00
23107
14 G 1/2" 25 14 64 36 PP 3 141.00
23108
14 G 1/2" 25 14 64 36 PTFE 1 109.00
23109
14 G 1/2" 25 14 64 36 PVDF 1 98.00
10687
4 NPT 1/8" 15 10 48 25 PP 10 70.00
10688
4 NPT 1/8" 15 10 48 25 PTFE 1 85.00
10689
4 NPT 1/8" 15 10 48 25 PVDF 1 75.00
10690
4 NPT 1/4" 15 15 48 30 PP 10 70.00
10691
4 NPT 1/4" 15 15 48 30 PTFE 1 85.00
10692
4 NPT 1/4" 15 15 48 30 PVDF 1 67.00
10693
4 NPT 3/8" 20 15 54 30 PP 10 140.00
10694
4 NPT 3/8" 20 15 54 30 PTFE 1 95.00
10695
4 NPT 3/8" 20 15 54 30 PVDF 1 86.00
10696
4 NPT 1/2" 25 20 60 35 PP 10 150.00
10697
4 NPT 1/2" 25 20 60 35 PTFE 1 106.00
10698
4 NPT 1/2" 25 20 60 35 PVDF 1 95.00
23111
6 NPT 1/8" 15 10 48 25 PP 10 70.00
23112
6 NPT 1/8" 15 10 48 25 PTFE 1 85.00
23113
6 NPT 1/8" 15 10 48 25 PVDF 1 75.00
23115
6 NPT 1/4" 15 15 48 30 PP 10 70.00
23116
6 NPT 1/4" 15 15 48 30 PTFE 1 85.00
23117
6 NPT 1/4" 15 15 48 30 PVDF 1 75.00
23119
6 NPT 3/8" 20 15 54 30 PP 10 135.00
23120
6 NPT 3/8" 20 15 54 30 PTFE 1 95.00
23121
6 NPT 3/8" 20 15 54 30 PVDF 1 86.00
23123
6 NPT 1/2" 25 20 60 35 PP 10 142.00
23124
6 NPT 1/2" 25 20 60 35 PTFE 1 106.00
23125
6 NPT 1/2" 25 20 60 35 PVDF 1 95.00
23127
8 NPT 1/8" 15 10 48 26 PP 10 150.00
23128
8 NPT 1/8" 15 10 48 26 PTFE 1 106.00
23129
8 NPT 1/8" 15 10 48 26 PVDF 1 95.00
23131
8 NPT 1/4" 15 15 48 31 PP 10 150.00
23132
8 NPT 1/4" 15 15 48 31 PTFE 1 106.00
23133
8 NPT 1/4" 15 15 48 31 PVDF 1 95.00
23135
8 NPT 3/8" 20 15 54 31 PP 10 153.00
23136
8 NPT 3/8" 20 15 54 31 PTFE 1 105.00
23137
8 NPT 3/8" 20 15 54 31 PVDF 1 94.00
23139
8 NPT 1/2" 25 20 60 36 PP 10 170.00
23140
8 NPT 1/2" 25 20 60 36 PTFE 1 124.00
23141
8 NPT 1/2" 25 20 60 36 PVDF 1 112.00
23143
10 NPT 1/8" 20 10 56 28 PP 10 170.00
23144
10 NPT 1/8" 20 10 56 28 PTFE 1 124.00
23145
10 NPT 1/8" 20 10 56 28 PVDF 1 112.00
23147
10 NPT 1/4" 20 15 56 33 PP 10 170.00
23148
10 NPT 1/4" 20 15 56 33 PTFE 1 124.00
23149
10 NPT 1/4" 20 15 56 33 PVDF 1 112.00
23151
10 NPT 3/8" 20 15 56 33 PP 10 170.00
23152
10 NPT 3/8" 20 15 56 33 PTFE 1 124.00
23153
10 NPT 3/8" 20 15 56 33 PVDF 1 112.00
23155
10 NPT 1/2" 25 20 62 38 PP 10 177.00
23156
10 NPT 1/2" 25 20 62 38 PTFE 1 126.00
23157
10 NPT 1/2" 25 20 62 38 PVDF 1 114.00
23159
12 NPT 1/4" 20 15 58 38 PP 5 115.00
23160
12 NPT 1/4" 20 15 58 38 PTFE 1 117.00
23161
12 NPT 1/4" 20 15 58 38 PVDF 1 113.00
23163
12 NPT 3/8" 20 15 58 38 PP 5 114.00
23164
12 NPT 3/8" 20 15 58 38 PTFE 1 124.00
23165
12 NPT 3/8" 20 15 58 35 PVDF 1 113.00
23167
12 NPT 1/2" 25 20 64 40 PP 5 130.00
23168
12 NPT 1/2" 25 20 64 40 PTFE 1 131.00
23169
12 NPT 1/2" 25 20 64 40 PVDF 1 119.00
23171
14 NPT 1/4" 25 15 64 37 PP 3 126.00
23172
14 NPT 1/4" 25 15 64 37 PTFE 1 121.00
23173
14 NPT 1/4" 25 15 64 37 PVDF 1 109.00
23175
14 NPT 3/8" 25 15 64 37 PP 3 132.00
23176
14 NPT 3/8" 25 15 64 37 PTFE 1 127.00
23177
14 NPT 3/8" 25 15 64 37 PVDF 1 115.00
23179
14 NPT 1/2" 25 20 64 42 PP 3 144.00
23180
14 NPT 1/2" 25 20 64 42 PTFE 1 132.00
23181
14 NPT 1/2" 25 20 64 42 PVDF 1 119.00
23183
6 M10 x 1,5 15 8 48 23 PP 10 a.A.
23184
6 M10 x 1,5 15 8 48 23 PTFE 2 a.A.
23185
6 M10 x 1,5 15 8 48 23 PVDF 5 a.A.
23187
6 M12 x 1,5 15 12 48 27 PP 10 a.A.
23188
6 M12 x 1,5 15 12 48 27 PTFE 2 a.A.
23189
6 M12 x 1,5 15 12 48 27 PVDF 2 a.A.
23191
6 M16 x 1,5 20 12 54 27 PP 10 a.A.
23192
6 M16 x 1,5 20 12 54 27 PTFE 2 a.A.
23193
6 M16 x 1,5 20 12 54 27 PVDF 2 a.A.
23195
6 M18 x 1,5 20 12 54 27 PP 5 a.A.
23196
6 M18 x 1,5 20 12 54 27 PTFE 2 a.A.
23197
6 M18 x 1,5 20 12 54 27 PVDF 2 a.A.
23199
8 M10 x 1,5 15 8 48 24 PP 10 a.A.
23200
8 M10 x 1,5 15 8 48 24 PTFE 5 a.A.
23201
8 M10 x 1,5 15 8 48 24 PVDF 2 a.A.
23203
8 M12 x 1,5 15 12 48 28 PP 10 a.A.
23204
8 M12 x 1,5 15 12 48 28 PTFE 2 a.A.
23205
8 M12 x 1,5 15 12 48 28 PVDF 2 a.A.
23207
8 M16 x 1,5 20 12 54 28 PP 10 a.A.
23208
8 M16 x 1,5 20 12 54 28 PTFE 2 a.A.
23209
8 M16 x 1,5 20 12 54 28 PVDF 2 a.A.
23211
8 M18 x 1,5 20 12 54 28 PP 5 a.A.
23212
8 M18 x 1,5 20 12 54 28 PTFE 2 a.A.
23213
8 M18 x 1,5 20 12 54 28 PVDF 2 a.A.
23215
10 M10 x 1,5 20 8 56 26 PP 10 a.A.
23216
10 M10 x 1,5 20 8 56 26 PTFE 2 a.A.
23217
10 M10 x 1,5 20 8 56 26 PVDF 1 69.00
23219
10 M12 x 1,5 20 12 56 30 PP 10 a.A.
23220
10 M12 x 1,5 20 12 56 30 PTFE 2 a.A.
23221
10 M12 x 1,5 20 12 56 30 PVDF 2 a.A.
23223
10 M16 x 1,5 20 12 56 30 PP 5 a.A.
23224
10 M16 x 1,5 20 12 56 30 PTFE 2 a.A.
23225
10 M16 x 1,5 20 12 56 30 PVDF 2 a.A.
23227
10 M18 x 1,5 20 12 56 30 PP 5 a.A.
23228
10 M18 x 1,5 20 12 56 30 PTFE 2 a.A.
23229
10 M18 x 1,5 20 12 56 30 PVDF 2 a.A.
23231
12 M12 x 1,5 20 12 58 32 PP 5 a.A.
23232
12 M12 x 1,5 20 12 58 32 PTFE 2 a.A.
23233
12 M12 x 1,5 20 12 58 32 PVDF 2 a.A.
23235
12 M14 x 1,5 20 12 58 32 PP 5 a.A.
23236
12 M14 x 1,5 20 12 58 32 PTFE 2 a.A.
23237
12 M14 x 1,5 20 12 58 32 PVDF 2 a.A.
23239
12 M16 x 1,5 20 12 58 32 PP 5 a.A.
23240
12 M16 x 1,5 20 12 58 32 PTFE 2 a.A.
23241
12 M16 x 1,5 20 12 58 32 PVDF 2 a.A.
23243
12 M18 x 1,5 20 12 58 32 PP 5 a.A.
23244
12 M18 x 1,5 20 12 58 32 PTFE 2 a.A.
23245
12 M18 x 1,5 20 12 58 32 PVDF 2 a.A.
23247
14 M12 x 1,5 25 12 64 34 PP 5 a.A.
23248
14 M12 x 1,5 25 12 64 34 PTFE 2 a.A.
23249
14 M12 x 1,5 25 12 64 34 PVDF 2 a.A.
23251
14 M16 x 1,5 25 12 64 34 PP 5 a.A.
23252
14 M16 x 1,5 25 12 64 34 PTFE 2 a.A.
23253
14 M16 x 1,5 25 12 64 34 PVDF 2 a.A.
23255
14 M18 x 1,5 25 12 64 34 PP 5 a.A.
23256
14 M18 x 1,5 25 12 64 34 PTFE 1 a.A.
23257
14 M18 x 1,5 25 12 64 34 PVDF 1 a.A.
Accessories
Similar products
Viewed