window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Washer (DIN 9021) made of PVC-P (plasticized PVC, soft) | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Washer (DIN 9021) made of PVC-P (plasticized PVC, soft)

Product specification Chemical features: Good resistance to weak alkalis and acids as well... more

Product specification

Chemical features:

Good resistance to weak alkalis and acids as well as inorganic salt solutions; limited resistance to organic acids, mineral oils, fats and oils.

Material specification:

PVC products usually feature quite a good resistance to media and weather, and are distinguished by their flame resistance.

Low water absorption

Good resistance to UV radiation

Good electrical insulation

PVC is not suitable for use with polar solvents due to its polar structure, therefore only limited resistance to hydrolysis.

In contrast to rigid PVC (PVC-U), plasticized PVC (PVC-P) is only moderately suitable for use with mineral oils and fats as well as aliphatic hydrocarbons (e.g. alcohols) due to the used plasticizers.

Can be bonded, welded and cutted

Up to +40 °C rubbery-elastic, leather-like

Technical specification

Material: PVC-P (polyvinyl chloride, soft)

Colour: natural

Density: 1.17 - 1.35 g/cm3

Shore hardness A: 74° - 76°

Temperature range: -20 to +55 °C

Tensile strength: 16 - 20 N/mm2

Elongation at break: 170 - 400 %

Surface resistance: approx. 1011 Ohm (DIN 53482)

Volume resistivity: >1011 Ohm x cm (DIN 53482)

Dielectric strength: 24 - 34 kV/mm (DIN 53481)

Dielectric constant: 4.2 - 8 at 50 Hz

Burning behavior: Self-extinguishing

Regulations: similar to DIN 9021, ISO 7093

No additional information available.
Item Image For thread d
mm
D
mm
h
mm
Unit
piece
Price
Euro*
Buy
338295
M3 3,5 9 0,8 50 20.00
338296
M3 3,5 9 0,8 100 30.00
338297
M4 4,6 15 1,5 50 22.00
338298
M4 4,6 15 1,5 100 38.00
338299
M5 5,3 17 1,5 50 34.00
338300
M5 5,3 17 1,5 100 56.00
338301
M6 6,8 18 1,5 50 38.00
338302
M6 6,8 18 1,5 100 62.00
338303
M8 8,5 25 2,1 50 66.00
338304
M8 8,5 25 2,1 100 114.00
338305
M10 10,5 30 2,5 50 80.00
338306
M10 10,5 30 2,5 100 136.00
338307
M12 13 40 3 25 56.00
338308
M12 13 40 3 50 98.00
Viewed