Items

POM Quick-Disconnect Nipple, NW 3.2 mm

Previous
#DetailNavNext#
POM Quick-Disconnect Nipple, NW 3.2 mm
 
 

Product specification

Male coupling part. With port or shut-off and hose nozzle; external thread or pipe screwed fitting for piping connnection. Can be combined with all female coupling parts of nominal width 3.2 mm.

 

General Information

THOMAFLUID®-quick-disconnect coupling systems are excellently suited for connecting and disconnecting of tubes, apparatuses etc. The quick-disconnect couplings are easy to operate, connecting and disconnecting can be done by one hand. The coupling is self-locking when the nipple is plugged-in. For disconnection a short thumb pressure on the lock is sufficient to pull out the nipple easily. All nipples are fitted with an easily interchangeable, reliably sealing O-ring.

A complete operable THOMAFLUID®-quick-disconnect coupling system consists of a coupling part and a nipple part, both parts may be fitted with valves. A complete quick-disconnect coupling system locking at one side consists of a coupling part with shut-off and a nipple part with port, or a coupling part with port and a nipple part with shut-off. To get a coupling locking on both sides, a coupling part as well as a nipple part, both with shut-off, have to be obtained.

General Information

For compressed air, gases, liquids, and vacuum, floor cleaning equipment, filtration of deionized water, dispensing equipment, automated machines, compression therapy, leak detectors.

The coupling parts (couplings and nipples) are made of thermoplastic acetal in the injection-moulding process. They are robust and usable with the most mild chemicals.

Resistant to alcohol, aldehydes, petrol, ethers, esters, glykols and motor oils, within the pH range of 4 to 9 also to alkalis and acids.

General Information

Material:

Housing: POM (polyacetal, polyoxymethylene)

Gaskets: NBR (butadiene-rubber)

Clip locking: stainless steel 316

Temperature range: -40 to +82 °C

Max. operating pressure:

Type micro: 8.3 bar at +20 °C

Type standard: 6.9 bar at +20 °C

Position Item Image Connection Valve Max. op. pressure1
bar
Length
mm
Design Unit
piece
Price
Euro
Buy
1 40917   nozzle 1.6 mm without 6,9 19 micro 3 24.00 Warenkorb
2 40918   nozzle 3.2 mm without 6,9 23 micro 3 24.00 Warenkorb
3 51359   nozzle 1.6 mm without 8,3 20 standard 1 12.00 Warenkorb
4 51316   nozzle 3.2 mm without 8,3 27 standard 1 12.00 Warenkorb
5 51361   nozzle 4.8 mm without 8,3 31 standard 1 12.00 Warenkorb
6 51317   nozzle 6.4 mm without 8,3 31 standard 1 12.00 Warenkorb
7 51358   pipe 4 mm without 8,3 29 standard 1 13.00 Warenkorb
8 51311   pipe 6.4 mm without 8,3 29 standard 1 13.00 Warenkorb
9 51312   pipe 9.5 mm without 8,3 36 standard 1 13.00 Warenkorb
10 51306   ext. thread NPT 1/8" without 8,3 26 standard 1 13.00 Warenkorb
11 51307   ext. thread NPT 1/4" without 8,3 29 standard 1 13.00 Warenkorb
12 51357   int. thread UNF 10-32 without 8,3 16 standard 1 12.00 Warenkorb
13 51378   nozzle 1.6 mm with 8,3 27 standard 1 21.00 Warenkorb
14 51340   nozzle 3.2 mm with 8,3 42 standard 1 21.00 Warenkorb
15 51379   nozzle 4.8 mm with 8,3 48 standard 1 21.00 Warenkorb
16 51341   nozzle 6.4 mm with 8,3 43 standard 1 21.00 Warenkorb
17 51377   pipe 4 mm with 8,3 42 standard 1 21.00 Warenkorb
18 51335   pipe 6.4 mm with 8,3 40 standard 1 23.00 Warenkorb
19 51336   pipe 9.5 mm with 8,3 39 standard 1 27.00 Warenkorb
20 51330   ext. thread NPT 1/8" with 8,3 37 standard 1 23.00 Warenkorb
21 51331   ext. thread NPT 1/4" with 8,3 36 standard 1 23.00 Warenkorb
22 51376   int. thread UNF 10-32 with 8,3 33 standard 1 18.00 Warenkorb

[1] at +20 °C

Accessories

Topseller

 
 

Viewed

Recently Viewed