Micro Elbow Connector made of PTFE
Product specification
Right angle connector for tubings of rigid plastics or metal.
General Information EMP-M2
A long sealing cone (ferrule) put at the end of the tubing is solidly screwed into the conical fit of the connector by means of a knurled cap nut. The resistance to withdrawing forces is increased by the contact pressure on the tubing exerted by the cap nut on a FPM-O-ring via a pressure pad.
PVDF (Polyvinylidene fluoride)
High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.
High impact toughness even at low temperatures
Highest mechanical stability and stiffness
Good breakdown strength
Low dielectric loss factor
Physiologically safe
Meeting highest purity requirements
Outstanding resistance to UV, weather and aging
Flame-resistant
High thermal stability
Resistant to alcohols, fats and oils, halogenes, alkalis, acids
Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid
Colour: nature, slightly translucent
Density: 1.75 g/cm3
Temperature range: -40 to +140 °C
Shore hardness D: 79° (great hardness)
Max. operating pressure: 1 bar at +20 °C
Water absorption: <0.04 % (water resistant)
Tensile strength: 38 - 50 N/mm2
Elongation at break: 12 %
Surface resistance: >1013 Ohm
Melt flow index MFR: 6 g/10 min.
PTFE (Polytetrafluoroethylene)
Heavy-duty plastic
Antiadhesive surface
Outstanding sliding properties
Lowest friction coefficient of all fluorinated plastics
Excellent stress cracking resistance
Excellent weather resistance
Highest gas-tightness
No water absorption
Very good dielectric properties independent of frequency and temperature
Very good electrical insulating capacity also at air humidity
High tracking resistance
Non-combustible
Colour: milky, white
Density: 2.20 g/cm3
Temperature range: -200 to +150 °C
Shore hardness D: 60°
Max. operating pressure: 1 bar at +20 °C
Tearing strength: 30 - 40 N/mm2
Elongation at break: 300 %
Water absorption: 0.01 %
Surface resistance: >1017 Ohm
Item | Image |
Tubing outside Ø mm
|
D mm
|
L1 mm
|
Einheit Stück
|
Price Euro* |
Buy |
---|---|---|---|---|---|---|---|
499061 |
|
0,7 | 12 | 28 | 2 | 119.00 | |
499071 |
|
1 | 12 | 28 | 2 | 119.00 | |
499081 |
|
1,5 | 12 | 28 | 2 | 119.00 | |
49909 |
|
1,6 | 12 | 28 | 2 | 119.00 | |
49910 |
|
1,8 | 12 | 28 | 2 | 119.00 | |
49911 |
|
2 | 12 | 28 | 2 | 119.00 | |
49912 |
|
2,5 | 12 | 28 | 2 | 119.00 | |
49913 |
|
2,8 | 12 | 28 | 2 | 119.00 | |
49914 |
|
3 | 12 | 28 | 2 | 119.00 | |
49915 |
|
3,1 | 12 | 28 | 2 | 119.00 | |
49916 |
|
3,2 | 12 | 28 | 2 | 119.00 | |
49917 |
|
3,5 | 12 | 28 | 2 | 119.00 | |
49918 |
|
3,6 | 12 | 28 | 2 | 119.00 | |
49919 |
|
4 | 12 | 28 | 2 | 119.00 | |
49920 |
|
4,3 | 12 | 28 | 2 | 119.00 | |
49921 |
|
4,5 | 12 | 28 | 2 | 119.00 | |
49922 |
|
4,8 | 12 | 28 | 2 | 119.00 | |
49923 |
|
5 | 12 | 28 | 2 | 119.00 | |
49924 |
|
5,1 | 12 | 28 | 2 | 119.00 | |
49925 |
|
5,5 | 12 | 28 | 2 | 119.00 | |
49926 |
|
6 | 12 | 28 | 2 | 119.00 | |
49927 |
|
6,4 | 12 | 28 | 2 | 119.00 |