window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Straight Tri-Clamp Tube Connector made of PP, PVDF or PFA | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Straight Tri-Clamp Tube Connector made of PP, PVDF or PFA

Product specification Tubing connection on one side, Tri-Clamp flange on the other side... more

Product specification

Tubing connection on one side, Tri-Clamp flange on the other side

Accessories: Tri-Clamp double-pin clamp (item 341140-341142), gaskets alternatively made of EPDM, FPM or PTFE (item 341790-341798).

General Information In applications requiring absolute cleanliness and reliability, such as... more

General Information

In applications requiring absolute cleanliness and reliability, such as in the pharmaceutical industry, our sterilisable Tri-Clamp threaded connectors are essential. The Tri-Clamp connector can be combined on the other side with a Series EMP-3 threaded connector for tubes, a Series EMP-4 threaded connector for pipes or a male thread. Hence, these are versatile threaded connectors that can also be mounted to any existing fittings with Tri-Clamp connectors. The Tri-Clamp threaded connector is easy to use. Simply press the two flange-like connector pieces against each other and fasten them together using the stainless steel locking clip. A sealing ring is situated between the connector pieces to maintain a proper seal. The resulting connection is form-fit and smooth and a wing nut on the locking clip makes it easy to quickly open and close the connection at any time.

Size, diameter and clip in accordance with DIN 32676, ISO 2852, BS 4825

Gaskets and retainer clips are to be ordered together with selected Tri-Clamps.

PP (Polypropylene)

Extremely good impact toughness and notch impact strength

Higher hardness and stiffness as well as better resilience than PE

Thermoforming possible

Very good dielectrical properties

Good resistance to alcohols, ketones, conc. acids and alkalis

Not stable to aromatic hydrocarbons, fats and oils, halogenes

Autoclavable

Resistant to hydrolysis

Physiologically safe

Regulatory compliance to FDA 21 CFR 177.1520, RoHS, BPA-free, DEHP-free, BSE/ADI-free

Colour: grey

Density: 0.90 g/cm3

Temperature range: +5 to +90 °C

Shore hardness D: 72°

Max. operating pressure: 6 bar at +20 °C

Water absorption: <0.05 %

Tensile strength: 25 - 40 N/mm2

Elongation at break: 800 %

Surface resistance: >1013 Ohm

Melt flow index MFR: 0.3 g/10 min.

PVDF (Polyvinylidene fluoride)

High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.

High impact toughness even at low temperatures

Good breakdown strength

Low dielectric loss factor

Highest mechanical stability and stiffness

Meeting highest purity requirements

Comply with the guidelines from FDA and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.

Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualities

Outstanding resistance to UV, weather and aging

Flame-resistant

High thermal stability

Resistant to alcohols, fats and oils, halogenes, alkalis, acids

Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid

Colour: nature, slightly translucent

Density: 1.75 g/cm3

Temperature range: -40 to +140 °C

Shore hardness D: 79°

Max. operating pressure: 6 bar at +20 °C

Water absorption: <0.04 %

Tensile strength: 38 - 50 N/mm2

Surface resistance: >1013 Ohm

Melt flow index MFR: 6 g/10 min.

PTFE (Polytetrafluoroethylene)

Heavy-duty plastic

Antiadhesive surface

Outstanding sliding properties

Lowest friction coefficient of all fluorinated plastics

Excellent stress cracking resistance

Excellent weather resistance

Highest gas-tightness

No water absorption

Very good dielectric properties independent of frequency and temperature

Very good electrical insulating capacity also at air humidity

High tracking resistance

Non-combustible

Colour: milky, white

Density: 2.20 g/cm3

Temperature range: -200 to +150 °C

Shore hardness D: 60°

Max. operating pressure: 6 bar at +20 °C

Tearing strength: 30 - 40 N/mm2

Elongation at break: 300 %

Water absorption: 0.01 %

Surface resistance: >1017 Ohm

PFA (Perfluoroalkoxy)

High-quality technical plastic for chemical apparatus and machine construction as well as electrical engineering

Chemical, thermal and dielectrical properties practically such as PTFE, but suitable for thermoplastic processing (welding, die casting, deep drawing). Lower medium diffusion, better transparency, larger hardness and better dimensional stability (lower tendency to cold flow) compared to PTFE.

Highest temperature resistance of all meltable fluorinated plastics

Very high dimensional stability in heat

Very high resistance to media

Very good pressure resistance

Low friction coefficient

Can be treated by autoclave (absolute sterile)

Comply with the guidelines from FDA and USP class VI.

Excellent resistance to weather

Flame-resistant

Colour: milky, translucent

Density: 2.10 g/cm3

Temperature range: -200 to +200 °C (highest dimensional stability in heat)

Shore hardness D: 60° to 65°

Max. operating pressure: 6 bar at +20 °C

Coefficient of sliding friction: 0.2 - 0.3 (dynamic against steel, dry)

Tensile strength: 27 to 32 N/mm2 at +23 °C

Water absorption: <0.03 %

Dielectric constant: 2,1

Surface resistance: >1017 Ohm

Item Image Tubing inside Ø
mm
Schlauch Außen-Ø
mm
Tri-Clamp Ø
mm
L
mm
L1
mm
L2
mm
Werkstoff Einheit
Stück
Price
Euro*
Buy
341103
4 6 25 36 21 32,5 PP 4 59.00
341104
6 8 25 36 21 32,5 PP 4 60.00
341105
8 10 25 39 24 35,5 PP 4 110.00
341106
10 12 25 43 28 39,5 PP 4 149.00
341107
6 8 34 36 21 32,5 PP 4 72.00
341108
8 10 34 39 24 35,5 PP 4 104.00
341109
10 12 34 43 28 39,5 PP 4 153.00
341110
12 14 34 48 33 44,5 PP 4 171.00
341143
4 6 25 36 21 32,5 PVDF 2 53.00
341144
6 8 25 36 21 32,5 PVDF 2 62.00
341145
8 10 25 39 24 35,5 PVDF 2 81.00
341146
10 12 25 43 28 39,5 PVDF 2 104.00
341147
6 8 34 36 21 32,5 PVDF 2 68.00
341148
8 10 34 39 24 35,5 PVDF 2 78.00
341149
10 12 34 43 28 39,5 PVDF 2 104.00
341150
12 14 34 48 33 44,5 PVDF 2 143.00
341066
4 6 25 36 21 32,5 PFA 2 102.00
341067
6 8 25 36 21 32,5 PFA 2 107.00
341068
8 10 25 39 24 35,5 PFA 2 123.00
341069
10 12 25 43 28 39,5 PFA 2 155.00
341070
6 8 34 36 21 32,5 PFA 2 113.00
341071
8 10 34 39 24 35,5 PFA 2 126.00
341072
10 12 34 43 28 39,5 PFA 2 158.00
341073
12 14 34 48 33 44,5 PFA 2 222.00
Accessories
Similar products
Thomaplast V Thomaplast V
Viewed