gtag('event', 'view_item', { "items": [{ "item_id": "G339197", "item_name": "Spacer Standoff made of PA - hexagonal, internal thread", "item_brand": "Reichelt", "item_category": "Fasteners", "item_category2": "Spacer Elements", "price": 1 }]});
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Spacer Standoff made of PA - hexagonal, internal thread

Product specification Hexagon spacer standoffs, internal thread M6 on both sides more

Product specification

Hexagon spacer standoffs, internal thread M6 on both sides

General Information PA 6 .6 Good coefficient of sliding friction High mechanical... more

General Information PA 6.6

Good coefficient of sliding friction

High mechanical stability and fatigue strength

Excellent resilience

Impact resistant

Resistant to abrasion

Resistant to cold

Chemical features:

Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alkohols, esters, ketones, ethers and amines.

Material specification:

The polyamides are universal materials for mechanical functional parts

The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Insulating properties and an amazingly high tensile strength

PA can also be used in the food processing industry and in medical fields

Resistant to corrosion and abrasion

Non-toxic and unmagnetic

Vibration-damping

PA 6.6 features the same chemical resistance as PA 6

PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6

However, PA 6.6 is a little less impact resistant compared to PA 6

Material: PA 6.6 (polyamide 6.6)

Colour: natural

Density: 1.14 g/cm3 (DIN 53479)

Temperature range: -30 to +100 °C

Melting temperature: +255 °C (DIN 53736)

Yield stress: 83 N/mm2 (ISO 527)

Elongation at break: 30 % (DIN 53455)

Bending strength: 115 N/mm2 (DIN 53452)

Elastic modulus: 3,000 N/mm2 (DIN 53457)

Impact resistance (Charpy): without break (DIN 53453)

Notch impact strength (Izod): 60 J/m (ASTM D 256)

Coefficient of sliding friction against steel (dry): 0.35 - 0.42

Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483)

Volume resistivity: 1015 Ohm x cm (DIN 53482)

Surface resistance: approx. 1014 Ohm (DIN 53482)

Comparative tracking index (CTI): >600 V (IEC 112)

Dielectric strength: approx. 40 kV/mm (DIN 53481)

Water absorption (saturation): approx. 8.5 % (DIN 53495)

Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

Item Image Internal thread P1
mm
P2
mm
L
mm
SW
mm
Einheit
Stück
Price
Euro*
Buy
339197
M6 x 1 5 5 10 10 10 88.00
339198
M6 x 1 5 5 10 10 25 189.00
339199
M6 x 1 6 6 12 10 10 88.00
339200
M6 x 1 6 6 12 10 25 189.00
339203
M6 x 1 7,5 7,5 15 10 10 88.00
339204
M6 x 1 7,5 7,5 15 10 25 189.00
339207
M6 x 1 10 10 20 10 10 88.00
339208
M6 x 1 10 10 20 10 25 189.00
339209
M6 x 1 10 10 25 10 5 67.00
339210
M6 x 1 10 10 25 10 15 172.00
339211
M6 x 1 10 10 30 10 5 67.00
339212
M6 x 1 10 10 30 10 15 172.00
339213
M6 x 1 10 10 35 10 5 73.00
339214
M6 x 1 10 10 35 10 15 189.00
339215
M6 x 1 10 10 40 10 5 73.00
339216
M6 x 1 10 10 40 10 15 189.00
339217
M6 x 1 10 10 45 10 5 73.00
339218
M6 x 1 10 10 45 10 15 189.00
339219
M6 x 1 10 10 50 10 5 73.00
339220
M6 x 1 10 10 50 10 15 189.00
339221
M6 x 1 10 10 55 10 5 73.00
339222
M6 x 1 10 10 55 10 15 189.00
339223
M6 x 1 10 10 60 10 5 73.00
339224
M6 x 1 10 10 60 10 15 189.00
Viewed