gtag('event', 'view_item', { "items": [{ "item_id": "G333107", "item_name": "Wing Screw (DIN 316) made of PA - rounded wings", "item_brand": "Reichelt", "item_category": "Fasteners", "item_category2": "Screws", "item_category3": "Wing Screw", "price": 1 }]});
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Wing Screw (DIN 316) made of PA - rounded wings

Technical specification Material: PA 6.6 (polyamide 66) Colour: natural... more

Technical specification

Material: PA 6.6 (polyamide 66)

Colour: natural

Regulations: DIN 316

General Information Good coefficient of sliding friction High mechanical stability and... more

General Information

Good coefficient of sliding friction

High mechanical stability and fatigue strength

Excellent resilience

Impact resistant

Resistant to abrasion

Resistant to cold

Chemical features:

Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines.

Material specification:

The polyamides are universal materials for mechanical functional parts

The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Insulating properties and an amazingly high tensile strength

PA can also be used in the food processing industry and in medical fields

Resistant to corrosion and abrasion

Non-toxic and unmagnetic

Vibration-damping

PA 6.6 features the same chemical resistance as PA 6

PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6

However, PA 6.6 is a little less impact resistant compared to PA 6

Material: PA 6.6 (polyamide 6.6)

Colour: natural

Density: 1.14 g/cm3 (DIN 53479)

Temperature range: -30 to +100 °C

Melting temperature: +255 °C (DIN 53736)

Yield stress: 83 N/mm2 (ISO 527)

Elongation at break: 30 % (DIN 53455)

Bending strength: 115 N/mm2 (DIN 53452)

Elastic modulus: 3,000 N/mm2 (DIN 53457)

Impact resistance (Charpy): without break (DIN 53453)

Notch impact strength (Izod): 60 J/m (ASTM D 256)

Coefficient of sliding friction against steel (dry): 0.35 - 0.42

Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483)

Volume resistivity: 1015 Ohm x cm (DIN 53482)

Surface resistance: approx. 1014 Ohm (DIN 53482)

Comparative tracking index (CTI): >600 V (IEC 112)

Dielectric strength: approx. 40 kV/mm (DIN 53481)

Water absorption (saturation): approx. 8.5 % (DIN 53495)

Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

Item Image External thread Gewindelänge
mm
Einheit
Stück
Price
Euro*
Buy
333107
M5 x 0,8 6 25 34.00
333108
M5 x 0,8 6 50 57.00
305574
M5 x 0,8 10 25 34.00
305575
M5 x 0,8 10 50 57.00
305576
M5 x 0,8 16 25 34.00
305577
M5 x 0,8 16 50 57.00
305578
M5 x 0,8 20 25 45.00
305579
M5 x 0,8 20 50 78.00
305580
M5 x 0,8 25 25 45.00
305581
M5 x 0,8 25 50 78.00
305582
M5 x 0,8 30 25 45.00
305583
M5 x 0,8 30 50 78.00
333109
M6 x 1 6 50 54.00
333110
M6 x 1 6 100 93.00
333111
M6 x 1 8 50 54.00
333112
M6 x 1 8 100 93.00
305584
M6 x 1 10 50 54.00
305585
M6 x 1 10 100 93.00
333113
M6 x 1 12 50 54.00
333114
M6 x 1 12 100 93.00
305586
M6 x 1 16 50 54.00
305587
M6 x 1 16 100 93.00
305588
M6 x 1 20 25 36.00
305589
M6 x 1 20 50 59.00
305590
M6 x 1 25 25 36.00
305591
M6 x 1 25 50 59.00
305592
M6 x 1 30 25 36.00
305593
M6 x 1 30 50 59.00
333115
M6 x 1 35 25 36.00
333116
M6 x 1 35 50 59.00
333117
M6 x 1 40 25 40.00
333118
M6 x 1 40 50 67.00
333119
M6 x 1 45 25 40.00
333120
M6 x 1 45 50 67.00
333121
M6 x 1 50 25 40.00
333122
M6 x 1 50 50 67.00
333123
M6 x 1 60 25 40.00
333124
M6 x 1 60 50 67.00
333125
M6 x 1 70 25 59.00
333126
M6 x 1 70 50 98.00
333127
M6 x 1 80 25 59.00
333128
M6 x 1 80 50 98.00
333129
M8 x 1,25 6 25 53.00
333130
M8 x 1,25 6 50 89.00
333131
M8 x 1,25 8 25 53.00
333132
M8 x 1,25 8 50 89.00
333133
M8 x 1,25 10 25 53.00
333134
M8 x 1,25 10 50 89.00
333135
M8 x 1,25 12 25 53.00
333136
M8 x 1,25 12 50 89.00
333137
M8 x 1,25 16 25 61.00
333138
M8 x 1,25 16 50 103.00
333139
M8 x 1,25 20 25 61.00
333140
M8 x 1,25 20 50 103.00
333141
M8 x 1,25 25 25 61.00
333142
M8 x 1,25 25 50 103.00
333143
M8 x 1,25 30 25 61.00
333144
M8 x 1,25 30 50 103.00
333145
M8 x 1,25 35 25 64.00
333146
M8 x 1,25 35 50 106.00
333147
M8 x 1,25 40 25 64.00
333148
M8 x 1,25 40 50 106.00
333149
M8 x 1,25 45 25 64.00
333150
M8 x 1,25 45 50 106.00
333151
M8 x 1,25 50 20 55.00
333152
M8 x 1,25 50 40 90.00
333153
M8 x 1,25 60 20 55.00
333154
M8 x 1,25 60 40 90.00
333155
M8 x 1,25 70 10 36.00
333156
M8 x 1,25 70 20 70.00
333157
M8 x 1,25 80 10 36.00
333158
M8 x 1,25 80 20 70.00
333159
M10 x 1,5 6 20 60.00
333160
M10 x 1,5 6 40 99.00
333161
M10 x 1,5 8 20 60.00
333162
M10 x 1,5 8 40 99.00
333163
M10 x 1,5 10 20 60.00
333164
M10 x 1,5 10 40 99.00
333165
M10 x 1,5 12 20 60.00
333166
M10 x 1,5 12 40 99.00
333167
M10 x 1,5 16 20 60.00
333168
M10 x 1,5 16 40 99.00
333169
M10 x 1,5 20 20 60.00
333170
M10 x 1,5 20 40 99.00
333171
M10 x 1,5 25 10 35.00
333172
M10 x 1,5 25 20 56.00
333173
M10 x 1,5 30 10 35.00
333174
M10 x 1,5 30 20 56.00
333175
M10 x 1,5 35 10 35.00
333176
M10 x 1,5 35 20 56.00
333177
M10 x 1,5 40 10 35.00
333178
M10 x 1,5 40 20 56.00
333179
M10 x 1,5 45 10 35.00
333180
M10 x 1,5 45 20 56.00
333181
M10 x 1,5 50 10 47.00
333182
M10 x 1,5 50 20 76.00
333183
M10 x 1,5 60 10 47.00
333184
M10 x 1,5 60 20 76.00
333185
M10 x 1,5 70 10 47.00
333186
M10 x 1,5 70 20 76.00
333187
M10 x 1,5 80 10 47.00
333188
M10 x 1,5 80 20 76.00
Viewed