Slotted Raised Countersunk Head Screw (DIN 964) made of PP

Slotted Raised Countersunk Head Screw (DIN 964) made of PP

Technical specification Material: PP (polypropylene) Colour: natural... more

Close menu

Technical specification

Material: PP (polypropylene)

Colour: natural

Regulations: DIN 964, ISO 2010

General Information Resistant to corrosion, abrasion and to most chemicals Extremely good... more

Close menu

General Information

Resistant to corrosion, abrasion and to most chemicals

Extremely good impact toughness and notch impact strength

High surface hardness

Resistant to hydrolysis

Insulating against moisture and electricity

This material should not be used at freezing temperatures, because of embrittlement at temperatures below 0 °C

Chemical features:

Good resistance to alcohols, ketones, alkalis and acids (except strong and oxidizing acids); resistant to fats and oils, including mineral oils and fuels.

Material specification:

PP is a universally usable standard plastic with excellent properties

PP is sterilizable and has good electrical properties

Weldable; bondable only after pretreatment

PP is similar to PE (polyethylene), but more fat- and oil-resistant, and also features a higher hardness and stiffness than HDPE as well as a better resilience; its impact strength is, however, lower

UV radiation and weather: limited resistance

Material: PP (polypropylene)

Colour: natural

Density: 0.90 g/cm³ (DIN 53479)

Temperature range: 0 to +100 °C

Elastic modulus: 1,350 N/mm² (ISO 527)

Yield stress: 30 N/mm² (ISO 527-1)

Tearing strength: 25 - 40 N/mm² (DIN 53455)

Elongation at break: 70 % (DIN 53455)

Impact resistance: without break (DIN 53453)

Notch impact strength: 7 kJ/m² (DIN 53453)

Ball pressure hardness: 70 N/mm² (DIN 53456)

Coefficient of sliding friction against steel (dry): approx. 0.30 - 0.40

Thermal conductivity: 0.22 W/m * K (DIN 52612)

Shore hardness D: 70° (DIN 53505)

Volume resistivity: 10¹⁷ Ohm x cm (DIN 53482)

Surface resistance: 10¹³ Ohm (DIN 53482)

Dielectric constant: 2.27 at 50 Hz (DIN 53483)

Item	External thread	L mm	D mm	h1 mm	h2 mm	Einheit Stück	Price Euro*
336321	M5 x 0,8	8	9	2,5	1,25	50	60.00
336322	M5 x 0,8	8	9	2,5	1,25	100	103.00
336323¹	M5 x 0,8	10	9	2,5	1,25	50	60.00
336324¹	M5 x 0,8	10	9	2,5	1,25	100	103.00
336325	M5 x 0,8	15	9	2,5	1,25	50	60.00
336326	M5 x 0,8	15	9	2,5	1,25	100	103.00
336327	M5 x 0,8	17	9	2,5	1,25	50	60.00
336328	M5 x 0,8	17	9	2,5	1,25	100	103.00
336329¹	M5 x 0,8	20	9	2,5	1,25	50	60.00
336330¹	M5 x 0,8	20	9	2,5	1,25	100	103.00
336331	M5 x 0,8	25	9	2,5	1,25	50	65.00
336332	M5 x 0,8	25	9	2,5	1,25	100	110.00
336333	M5 x 0,8	30	9	2,5	1,25	50	65.00
336334	M5 x 0,8	30	9	2,5	1,25	100	110.00
336335	M5 x 0,8	40	9	2,5	1,25	50	65.00
336336	M5 x 0,8	40	9	2,5	1,25	100	110.00
336337	M5 x 0,8	50	9	2,5	1,25	50	67.00
336338	M5 x 0,8	50	9	2,5	1,25	100	116.00
336339	M6 x 1	8	11	3	1,5	50	67.00
336340	M6 x 1	8	11	3	1,5	100	116.00
336341¹	M6 x 1	12	11	3	1,5	50	67.00
336342¹	M6 x 1	12	11	3	1,5	100	116.00
336343	M6 x 1	17	11	3	1,5	50	67.00
336344	M6 x 1	17	11	3	1,5	100	116.00
336345¹	M6 x 1	20	11	3	1,5	50	67.00
336346¹	M6 x 1	20	11	3	1,5	100	116.00
336347	M6 x 1	25	11	3	1,5	50	67.00
336348	M6 x 1	25	11	3	1,5	100	116.00
336349	M6 x 1	30	11	3	1,5	50	67.00
336350	M6 x 1	30	11	3	1,5	100	116.00
336351	M6 x 1	40	11	3	1,5	50	73.00
336352	M6 x 1	40	11	3	1,5	100	125.00
336353	M6 x 1	50	11	3	1,5	50	73.00
336354	M6 x 1	50	11	3	1,5	100	125.00
336355¹	M8 x 1,25	20	14,5	4	2	50	82.00
336356¹	M8 x 1,25	20	14,5	4	2	100	144.00
336357	M8 x 1,25	25	14,5	4	2	50	82.00
336358	M8 x 1,25	25	14,5	4	2	100	144.00
336359	M8 x 1,25	30	14,5	4	2	50	90.00
336360	M8 x 1,25	30	14,5	4	2	100	157.00
336361	M8 x 1,25	40	14,5	4	2	50	90.00
336362	M8 x 1,25	40	14,5	4	2	100	157.00
336363	M8 x 1,25	50	14,5	4	2	50	90.00
336364	M8 x 1,25	50	14,5	4	2	100	157.00