gtag('event', 'view_item', { "items": [{ "item_id": "G305830", "item_name": "Hex Nut made of PA - flat", "item_brand": "Reichelt", "item_category": "Fasteners", "item_category2": "Nuts", "price": 1 }]});
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Hex Nut made of PA - flat

Technical specification Material: PA 6.6 (polyamide 66) Colour: black more

Technical specification

Material: PA 6.6 (polyamide 66)

Colour: black

General Information Good coefficient of sliding friction High mechanical stability and... more

General Information

Good coefficient of sliding friction

High mechanical stability and fatigue strength

Excellent resilience

Impact resistant

Resistant to abrasion

Resistant to cold

Chemical features:

Good resistance to weak alkalis, but only moderate resistance to strong alkalis; resistant to aromatic and aliphatic hydrocarbons, fuels, mineral oils and mineral lubricants; suitable for alcohols, esters, ketones, ethers and amines

Material specification:

The polyamides are universal materials for mechanical functional parts

The temperature resistance of polyamide (from -30 to +100 °C, for a short time +120 °C) allows use in many industries

Connecting parts made of polyamide and similar plastics protect from rust and corrosion damage

Insulating properties and an amazingly high tensile strength

PA can also be used in the food processing industry and in medical fields

Resistant to corrosion and abrasion

Non-toxic and unmagnetic

Vibration-damping

PA 6.6 features the same chemical resistance as PA 6

PA 6.6 has a higher hardness, abrasion resistance, and a little higher operating temperature than PA 6

However, PA 6.6 is a little less impact resistant compared to PA 6

Material: PA 6.6 (polyamide 6.6)

Colour: natural

Density: 1.14 g/cm3 (DIN 53479)

Temperature range: -30 to +100 °C

Melting temperature: +255 °C (DIN 53736)

Yield stress: 83 N/mm2 (ISO 527)

Elongation at break: 30 % (DIN 53455)

Bending strength: 115 N/mm2 (DIN 53452)

Elastic modulus: 3,000 N/mm2 (DIN 53457)

Impact resistance (Charpy): without break (DIN 53453)

Notch impact strength (Izod): 60 J/m (ASTM D 256)

Coefficient of sliding friction against steel (dry): 0.35 – 0.42

Dielectric loss factor (at 1 MHz): 0.025 (DIN 53483)

Volume resistivity: 1015 Ohm x cm (DIN 53482)

Surface resistance: approx. 1014 Ohm (DIN 53482)

Comparative tracking index (CTI): >600 V (IEC 112)

Dielectric strength: approx. 40 kV/mm (DIN 53481)

Water absorption (saturation): approx. 8.5 % (DIN 53495)

Moisture absorption (s.c.a.-saturation): approx. 2.9 % (DIN 53714)

Item Image Internal thread h
mm
SW
mm
Einheit
Stück
Price
Euro*
Buy
305830
M6 x 0,75 2,3 8 50 45.00
305831
M6 x 0,75 2,3 8 100 78.00
305833
M8 x 0,75 2,5 12 50 49.00
305834
M8 x 0,75 2,5 12 100 82.00
305836
M8 x 1 4 13 50 49.00
305837
M8 x 1 4 13 100 82.00
305839
M10 x 0,75 2,7 14 50 49.00
305840
M10 x 0,75 2,7 14 100 82.00
305842
M10 x 1 3,2 14 50 49.00
305843
M10 x 1 3,2 14 100 82.00
332531
M10 x 1 6 14 25 40.00
332532
M10 x 1 6 14 50 69.00
305845
M12 x 1 5 16 25 35.00
305846
M12 x 1 5 16 50 59.00
305848
M12 x 1 4,4 17 25 35.00
305849
M12 x 1 4,4 17 50 59.00
305851
M13 x 1 4,3 17 25 35.00
305852
M13 x 1 4,3 17 50 59.00
305854
M14 x 1 5,4 22 25 36.00
305855
M14 x 1 5,4 22 50 61.00
305857
M14 x 1,5 4 22 25 36.00
305858
M14 x 1,5 4 22 50 61.00
305860
M15 x 1 3 18 25 36.00
305861
M15 x 1 3 18 50 61.00
305863
M16 x 1 4,3 24 25 45.00
305864
M16 x 1 4,3 24 50 79.00
305866
M16 x 1,5 4,4 19 25 45.00
305867
M16 x 1,5 4,4 19 50 79.00
305869
M18 x 1 4,3 24 25 45.00
305870
M18 x 1 4,3 24 50 79.00
305872
M18 x 1,5 4,5 24 25 45.00
305873
M18 x 1,5 4,5 24 50 79.00
305875
M18 x 1,5 4,5 25 25 45.00
305876
M18 x 1,5 4,5 25 50 79.00
305878
M20 x 1,5 8 27 25 45.00
305879
M20 x 1,5 8 27 50 79.00
305881
M22 x 1 4,5 25 25 45.00
305882
M22 x 1 4,5 25 50 79.00
305884
M22 x 1,5 4,6 25 25 45.00
305885
M22 x 1,5 4,6 25 50 79.00
305887
M30 x 1,5 5 36 25 45.00
305888
M30 x 1,5 5 36 50 79.00
Viewed