window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Timing Belts and Gears | | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)
Viewed

Timing Belts and Timing Belt Pulleys

Timing belts made of PUR, toothed belt pulleys/gears made of plastic, aluminum, steel, as well as toothed shafts, clamping plates, tension rollers, and other drive elements are an integral part of the RCT range in the field of drive technology. As a specialist in drive technology, RCT stocks toothed elements such as toothed belt pulleys/gears with toothed belt profiles AT 5 made of aluminum, HDT-3M made of aluminum, HTD-5M made of steel or aluminum, and HTD-8M made of steel. Another group includes toothed belt pulleys/gears Tri 2.5 made of aluminum, T2.5 made of plastic, as well as T5 made of aluminum and T5 made of plastic.

Power transmission with timing belts

The application area of timing belt pulleys is power transmission, axis span bridging, and use for gear ratio changes. Timing belt pulleys are especially used in plant construction, process technology, chemical and industrial technology, as well as laboratory technology. The efficiency of timing belt pulleys is 98%, with different profiles and dimensions available for various applications.

Differences in the timing belt pulley range

Thus, there is a distinction between T-toothed belts, AT-toothed belts, and HTD-toothed belts. All of these belts have different application profiles that relate to the pulley range. The program also includes toothed shafts with AT5 profiles, HTD profiles, as well as T profiles, which are toothed over the entire length and made of aluminum. Clamping plates made of aluminum are offered in various widths and are suitable for belt profiles T5, AT5, HTD-5M, or HTD-8M. The application areas include power transmission, axis bridging, and gear ratio changes. Clamping plates, tension rollers - which serve for tensioning on the belt's outer side (belt back) - and toothed shafts in various profiles such as AT5, HTD, T5, as well as materials such as aluminum and stainless steel complement the offer. Reichelt Chemietechnik presents a wide selection of toothed elements that customers can purchase without a minimum order value.

The appropriate tension roller for timing belts is also available in the Reichelt Chemietechnik range, which is used for tensioning on the belt's outer side (belt back). Temperature ranges from -20 °C to +80 °C are allowed.

POM Gear

POM gears, made from the plastic Polyoxymethylene (POM), offer additional advantages due to their special material properties. POM is known for its excellent abrasion resistance and low friction, resulting in reduced noise and minimal wear. The smooth surface of POM gears contributes to reducing friction, which, in turn, minimizes energy loss and increases transmission efficiency. Additionally, POM exhibits high resistance to chemicals and moisture, supporting the durability of the gears in different environments. In applications where precision, low friction, and wear resistance are required, POM gears represent a preferred solution.

Pulleys

Pulleys are mechanical components that play a crucial role in power transmission in machines and systems. They are usually disc-shaped and have a tapered or grooved surface that accommodates the belt or strap. The main function of pulleys is to transmit rotary motion from a drive source, such as a motor, to a belt or strap. This belt or strap can then convey the motion to other components, such as another pulley or a machine part.

Buy Timing Belts and Timing Belt Pulleys at Reichelt Chemietechnik

Timing belts and toothed belt pulleys, including the appropriate toothed shaft and other accessories, offer various application possibilities in the field of drive technology. RCT has a wide range of  belt pulleys with different profiles such as AT5, HDT-3M, HTD-5M, and HTD-8M made of aluminum or steel. Power transmission, axis bridging, and gear ratio changes are among the application areas. Different profiles of belts such as T, AT, and HTD influence the range of toothed belt pulleys. Clamping plates, tension rollers, and toothed shafts in profiles AT5, HTD, or T5, as well as materials like aluminum and stainless steel, complete the range. Reichelt Chemietechnik presents a broad selection of toothed elements that customers can purchase without a minimum order value.

In our online shop, you will find a large assortment of gears, racks, shafts, as well as timing belts and toothed belt pulleys made of various materials (aluminum, POM, CR, PUR, and steel) that you can order inexpensively and without a minimum order value. Our customers from Germany, Switzerland, Austria, and many other countries have been trusting RCT Reichelt Chemietechnik for over 30 years. A wide selection, high quality, affordable prices, fair shipping costs! The entire range of toothed elements, such as  belt pulleys, timing belts, as well as toothed shafts, clamping plates, and tension rollers, is kept in stock. If you have technical questions about the appropriate DIN for shafts or belts, about inch sizes, or ISO specifications, please call us at 06221-312513. Our specialists are happy to advise you. We deliver one meter or 200 - because satisfied customers are important to us, we also deliver in small quantities.

 
 
Timing Belts and Timing Belt Pulleys Timing belts made of PUR, toothed belt pulleys/gears made of plastic, aluminum, steel, as well as toothed shafts, clamping plates,... read more »
Close window

Timing Belts and Timing Belt Pulleys

Timing belts made of PUR, toothed belt pulleys/gears made of plastic, aluminum, steel, as well as toothed shafts, clamping plates, tension rollers, and other drive elements are an integral part of the RCT range in the field of drive technology. As a specialist in drive technology, RCT stocks toothed elements such as toothed belt pulleys/gears with toothed belt profiles AT 5 made of aluminum, HDT-3M made of aluminum, HTD-5M made of steel or aluminum, and HTD-8M made of steel. Another group includes toothed belt pulleys/gears Tri 2.5 made of aluminum, T2.5 made of plastic, as well as T5 made of aluminum and T5 made of plastic.

Power transmission with timing belts

The application area of timing belt pulleys is power transmission, axis span bridging, and use for gear ratio changes. Timing belt pulleys are especially used in plant construction, process technology, chemical and industrial technology, as well as laboratory technology. The efficiency of timing belt pulleys is 98%, with different profiles and dimensions available for various applications.

Differences in the timing belt pulley range

Thus, there is a distinction between T-toothed belts, AT-toothed belts, and HTD-toothed belts. All of these belts have different application profiles that relate to the pulley range. The program also includes toothed shafts with AT5 profiles, HTD profiles, as well as T profiles, which are toothed over the entire length and made of aluminum. Clamping plates made of aluminum are offered in various widths and are suitable for belt profiles T5, AT5, HTD-5M, or HTD-8M. The application areas include power transmission, axis bridging, and gear ratio changes. Clamping plates, tension rollers - which serve for tensioning on the belt's outer side (belt back) - and toothed shafts in various profiles such as AT5, HTD, T5, as well as materials such as aluminum and stainless steel complement the offer. Reichelt Chemietechnik presents a wide selection of toothed elements that customers can purchase without a minimum order value.

The appropriate tension roller for timing belts is also available in the Reichelt Chemietechnik range, which is used for tensioning on the belt's outer side (belt back). Temperature ranges from -20 °C to +80 °C are allowed.

POM Gear

POM gears, made from the plastic Polyoxymethylene (POM), offer additional advantages due to their special material properties. POM is known for its excellent abrasion resistance and low friction, resulting in reduced noise and minimal wear. The smooth surface of POM gears contributes to reducing friction, which, in turn, minimizes energy loss and increases transmission efficiency. Additionally, POM exhibits high resistance to chemicals and moisture, supporting the durability of the gears in different environments. In applications where precision, low friction, and wear resistance are required, POM gears represent a preferred solution.

Pulleys

Pulleys are mechanical components that play a crucial role in power transmission in machines and systems. They are usually disc-shaped and have a tapered or grooved surface that accommodates the belt or strap. The main function of pulleys is to transmit rotary motion from a drive source, such as a motor, to a belt or strap. This belt or strap can then convey the motion to other components, such as another pulley or a machine part.

Buy Timing Belts and Timing Belt Pulleys at Reichelt Chemietechnik

Timing belts and toothed belt pulleys, including the appropriate toothed shaft and other accessories, offer various application possibilities in the field of drive technology. RCT has a wide range of  belt pulleys with different profiles such as AT5, HDT-3M, HTD-5M, and HTD-8M made of aluminum or steel. Power transmission, axis bridging, and gear ratio changes are among the application areas. Different profiles of belts such as T, AT, and HTD influence the range of toothed belt pulleys. Clamping plates, tension rollers, and toothed shafts in profiles AT5, HTD, or T5, as well as materials like aluminum and stainless steel, complete the range. Reichelt Chemietechnik presents a broad selection of toothed elements that customers can purchase without a minimum order value.

In our online shop, you will find a large assortment of gears, racks, shafts, as well as timing belts and toothed belt pulleys made of various materials (aluminum, POM, CR, PUR, and steel) that you can order inexpensively and without a minimum order value. Our customers from Germany, Switzerland, Austria, and many other countries have been trusting RCT Reichelt Chemietechnik for over 30 years. A wide selection, high quality, affordable prices, fair shipping costs! The entire range of toothed elements, such as  belt pulleys, timing belts, as well as toothed shafts, clamping plates, and tension rollers, is kept in stock. If you have technical questions about the appropriate DIN for shafts or belts, about inch sizes, or ISO specifications, please call us at 06221-312513. Our specialists are happy to advise you. We deliver one meter or 200 - because satisfied customers are important to us, we also deliver in small quantities.